Windows 10: All New Build- Lots of BSOD ax88x-pro Asus

Page 1 of 5 123 ... LastLast
  1.    22 Apr 2016 #1

    All New Build- Lots of BSOD ax88x-pro Asus




    Bought this new build for video editing.

    I am noting BSOD at windows login screen, and while browsing the internet. Sometimes even just looking at a document for 15 minutes and then BSOD.

    Getting the following errors, sometime I miss the error message but:
    kmode exeption not handled (clipsp.sys)
    page fault in nonpaged area clipsp.sys (this one the most)
    system thread exception not handled atikmdag.sys
    critical process died
    system thread exception not handled

    have tried updating all drivers I could think of. Have reinstalled windows a few times also.

    System Spec
    Computer type:
    PC/Desktop

    System Manufacturer/Model Number:
    A88x-Pro Asus Build

    OS:
    Windows 10 Home

    CPU:
    AMD FM2+ A10 77 3.8ghz

    Motherboard:
    Amd Asus A88x-Pro

    Memory:
    ddr3 16gb 1600m (2x 8gb modules)
    120gb sandisk ssd plus
    WD 2TB desktop hard dr

    Graphics Card(s):
    Radeon r7
      My ComputerSystem Spec


  2. Posts : 1,648
    Microsoft Windows 10 Home
       24 Apr 2016 #2

    Welcome aboard, @SalemCBR.

    In your case, various different bugcheck codes are pointing to memory corruption.
    Code:
    BugCheck 1E, {ffffffffc0000005, fffff80139afa145, ffffffffffffffff, 0}
    
    *** ERROR: Symbol file could not be found.  Defaulted to export symbols for clipsp.sys - 
    Probably caused by : memory_corruption
    
    Followup:     memory_corruption
    ---------
    Code:
    5750 errors : !clipsp (fffff800b6f45f17-fffff800b6f7260b)
    Code:
    BugCheck 50, {ffffe001e1fcfb4c, 2, fffff800b6f57c4d, 2}
    
    *** ERROR: Symbol file could not be found.  Defaulted to export symbols for clipsp.sys - 
    
    Could not read faulting driver name
    Probably caused by : memory_corruption
    
    Followup:     memory_corruption
    ---------
    Test your RAM modules for possible errors. Run memtest86+ for at least 8 consecutive passes.

    If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.
    Take a camera snap of the memtest86+ window before closing the program. Let us see it.
    Screenshots and Files - Upload and Post in Ten Forums - Windows 10 Forums
      My ComputerSystem Spec

  3.    25 Apr 2016 #3

    Arc said: View Post
    Welcome aboard, @SalemCBR.

    In your case, various different bugcheck codes are pointing to memory corruption.
    Code:
    BugCheck 1E, {ffffffffc0000005, fffff80139afa145, ffffffffffffffff, 0}
    
    *** ERROR: Symbol file could not be found.  Defaulted to export symbols for clipsp.sys - 
    Probably caused by : memory_corruption
    
    Followup:     memory_corruption
    ---------
    Code:
    5750 errors : !clipsp (fffff800b6f45f17-fffff800b6f7260b)
    Code:
    BugCheck 50, {ffffe001e1fcfb4c, 2, fffff800b6f57c4d, 2}
    
    *** ERROR: Symbol file could not be found.  Defaulted to export symbols for clipsp.sys - 
    
    Could not read faulting driver name
    Probably caused by : memory_corruption
    
    Followup:     memory_corruption
    ---------
    Test your RAM modules for possible errors. Run memtest86+ for at least 8 consecutive passes.

    If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.
    Take a camera snap of the memtest86+ window before closing the program. Let us see it.
    Screenshots and Files - Upload and Post in Ten Forums - Windows 10 Forums

    Thanks you for your reply. I am great full to have found the forum.

    I ran the test and took a picture. No errors were found.



    I wanted to keep the test running so I did what I could here by mobile device.

    Any help is greatly appreciated. Since this is a new build should I try to exchange the ram?
      My ComputerSystem Spec

  4.    26 Apr 2016 #4



    I let the test run overnight one more time. It did 12 passes and came up with no errors.
      My ComputerSystem Spec


  5. Posts : 1,648
    Microsoft Windows 10 Home
       26 Apr 2016 #5

    Nice! It minimizes the biggest possibility.

    A failing/buggy driver may pass bad info to the memory which is also a cause of memory corruption. As the next step, enable Driver Verifier to monitor the drivers.Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.

    information   Information
    Why Driver Verifier:
    It puts a stress on the drivers, ans so it makes the unstable drivers crash. Hopefully the driver that crashes is recorded in the memory dump.

    How Can we know that DV is enabled:
    It will make the system bit of slow, laggy.

    warning   Warning
    Before enabling DV, make it sure that you have earlier System restore points made in your computer. You can check it easily by using CCleaner looking at Tools > System Restore.

    If there is no points, make a System Restore Point manually before enabling DV.

    Tip   Tip



    Let us know the results, with the subsequent crash dumps, if any.
      My ComputerSystem Spec

  6.    26 Apr 2016 #6

    I have attached the crash dump files. I got 2 BSOD pretty fast after following your instructions.
      My ComputerSystem Spec


  7. Posts : 1,648
    Microsoft Windows 10 Home
       26 Apr 2016 #7

    It blames Norton.
    Code:
    *** WARNING: Unable to verify timestamp for SYMEFASI64.SYS
    *** ERROR: Module load completed but symbols could not be loaded for SYMEFASI64.SYS
    *******************************************************************************
    *                                                                             *
    *                        Bugcheck Analysis                                    *
    *                                                                             *
    *******************************************************************************
    
    Use !analyze -v to get detailed debugging information.
    
    BugCheck 1000007E, {ffffffffc0000005, fffff801ede48bef, ffffd000709db038, ffffd000709da850}
    
    Probably caused by : SYMEFASI64.SYS ( SYMEFASI64+148bef )
    
    Followup:     MachineOwner
    ---------
    Can you Please uninstall (not disable) Norton Security at least for a test?
    Disable Verifier, Uninstall Norton, run the computer normally with Windows Defender activated. See how it goes. Let us know.

    Yes, Norton is a very frequent BSOD causer.
      My ComputerSystem Spec

  8.    28 Apr 2016 #8

    I do feel like I am getting less BDOD and it takes longer. I am still getting "critical structure corruption" and "system service exception"

    I have attached the crash dump files.
      My ComputerSystem Spec

  9.    28 Apr 2016 #9

    Had a couple more. Couldn't read all of it. Part of what it said was kmode exception USBPort.

    New dump attached.
      My ComputerSystem Spec


  10. Posts : 1,648
    Microsoft Windows 10 Home
       28 Apr 2016 #10

    Still all different BSODs.
    Code:
    BugCheck 109, {a3a01f5a18c8b58d, b3b72be06b4a5e0a, fffff8021b5a8070, 2}
    
    Probably caused by : Unknown_Image ( ANALYSIS_INCONCLUSIVE )
    
    Followup:     MachineOwner
    ---------
    Code:
    BugCheck 3B, {c0000005, fffff8016ae1e60c, ffffd001a1f65b90, 0}
    
    Probably caused by : ntkrnlmp.exe ( nt!ObpLookupObjectName+46c )
    
    Followup:     MachineOwner
    ---------
    Code:
    BugCheck 1E, {ffffffffc0000005, fffff8014567069c, 0, ffffffffffffffff}
    
    Probably caused by : ntkrnlmp.exe ( nt!KiExecuteAllDpcs+26c )
    
    Followup:     MachineOwner
    ---------
    Please let Driver Verifier run one more time.
      My ComputerSystem Spec


 
Page 1 of 5 123 ... LastLast

Related Threads
Solved Lots of BSOD going on. in BSOD Crashes and Debugging
Hi there, For the last few days I have been getting lots of BSOD errors, seem to happen very frequently (often just minutes apart) when running utorrent. Dump file attached. Any help much appreciated. Thank you.
Why do they do this? I recently did the update of my W10x64 pro to version 1511 build 10586, and now I am discovering all kinds of annoying changes of my settings. In no particular order: * Caps Lock disable entry in registry was removed *...
i have multiple bsods a day and its really starting to tick me off please help 46713
hello, i am new here. i recently bought a new configuration. i started with installing win 8.1 since i had a license then upgraded to win 10. the bsods started in win 8.1 and keep going even now, while playing skyrim, even heartstone. i also get...

Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 14:58.
Find Us