BSOD Issues Unsolved For A Long Time

The latest dumpfile is

Code:

    *******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck 1000007E, {ffffffffc000001d, fffff8030d906169, ffffd0009acff848, ffffd0009acff060}
Probably caused by : hardware ( nt!KiCommitThreadWait+159 )

In the unloaded modules list (drivers) i found this

Unloaded modules:
fffff801`33650000 fffff801`3366f000 xusb22.sys
Timestamp: unavailable (00000000)
Checksum: 00000000
ImageSize: 0001F000
fffff801`33630000 fffff801`3363e000 ScpVBus.sys
Timestamp: unavailable (00000000)
Checksum: 00000000
ImageSize: 0000E000

These 2 drivers are for your Xbox 360 controller and Scarlet.Crush Productions Scp Dual Shock 3 Virtual Bus Driver.
It could be that this the reason for your BSOD, i have no idea.
I do not know what this subject is about at all, but after a short googling there seems to be problems with this driver (ScpVBus.sys it is from 2013 and predates windows 10) and windows 10 OS.
See if you can update it if you need it.
Or remove it and see if this stops the BSODs.

axe0 said:

To be clear about the safe mode crash, did it happen when you were in safe mode or before (while booting)?
Many say it happens before while it actually happens in safe mode, hence the reason why I ask it :)

No no, it happened before I was even booting into it.

axe0 said:

To be clear about the safe mode crash, did it happen when you were in safe mode or before (while booting)?
Many say it happens before while it actually happens in safe mode, hence the reason why I ask it :)

Had another BSOD-less crash just now. Wasn't really expecting it since yesterday went by without a hitch. Event Viewer just gives me a generic Kernel Power error.

axe0 said:

Could you test your PSU to ensure it is not causing any problems please.

How would I go about doing that? I don't really have a spare PSU I could replace it with.

I should note this PSU is brand new, it's not even 2 weeks old yet.

axe0 said:

PSU - Test DC Output Voltage - Windows 7 Help Forums

I'm not sure I'll be able to do something like this for a good while. I don't have the money to buy a multimeter right now and somehow I don't feel too confident with jamming stuff in my computer case, I have a propensity for screwing up with that.

axe0 said:

Nobody you know could do it for you and has the right equipment?

Unfortunately not, living on campus with other students doesn't have such benefits