BSOD Memory management ?

Page 1 of 2 12 LastLast

  1. Posts : 20

    BSOD Memory management ?

    Been getting this weird bluescreen just in the last few days, I don't think it's ram because I've ran memtest and 0 errors
      My Computer

  2. Arc's Avatar
    Posts : 1,626
    Microsoft Windows 10 Home

     *** Memory manager detected 13 instance(s) of page corruption, target is likely to have memory corruption.
    It may be either a failing RAM or a driver (I suspect Intel RST driver) passing bad information to the memory.
    Let us be confirmed about the RAM at first.

    Test your RAM modules for possible errors. Run memtest86+ for at least 8 consecutive passes.

    If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.
    Take a camera snap of the memtest86+ window before closing the program. Let us see it.
    Screenshots and Files - Upload and Post in Ten Forums - Windows 10 Forums

    If it does not show any error there, we will take our next step.
      My Computer

  3. Posts : 20
    Thread Starter

    I've ran memtest with 12 passes and it looks like I have 0 errors

    Microsoft OneDrive - Access files anywhere. Create docs with free Office Online.

    What should be the next step in finding my problem ? thank you
      My Computer

  4. Arc's Avatar
    Posts : 1,626
    Microsoft Windows 10 Home

    Next, let us enable Driver Verifier to monitor the drivers.Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.

    information   Information
    Why Driver Verifier:
    It puts a stress on the drivers, ans so it makes the unstable drivers crash. Hopefully the driver that crashes is recorded in the memory dump.

    How Can we know that DV is enabled:
    It will make the system bit of slow, laggy.

    warning   Warning
    Before enabling DV, make it sure that you have earlier System restore points made in your computer. You can check it easily by using CCleaner looking at Tools > System Restore.

    If there is no points, make a System Restore Point manually before enabling DV.

    Tip   Tip

    Let us know the results, with the subsequent crash dumps, if any.
      My Computer

  5. Posts : 20
    Thread Starter

    It looks like I crashed immediately

    please find attached my crash dump
      My Computer

  6. Posts : 654
    windows 10 Pro

    The dumpfile blames
    *                                                                             *
    *                        Bugcheck Analysis                                    *
    *                                                                             *
    Use !analyze -v to get detailed debugging information.
    BugCheck C9, {22e, fffff800042a10a0, ffffe0009554e870, 0}
    *** WARNING: Unable to verify timestamp for uvhid.sys
    *** ERROR: Module load completed but symbols could not be loaded for uvhid.sys
    Probably caused by : ntkrnlmp.exe
    Driver Description: Unified Remote HID Mini Driver for Unified Virtual HID
    Driver Update Site: Download:

    It looks like the above program is the culprit.
    Update it to the latest version and/or remove it to see if this stops the BSOD.
      My Computer

  7. Posts : 20
    Thread Starter

    Thank you so much, what's the best way to remove ? I just ran the uninstaller
      My Computer

  8. Arc's Avatar
    Posts : 1,626
    Microsoft Windows 10 Home

    First of all, disable Unified Remote 3 in startup. Dont let it run alongwith windows in the background.
    Unified Remote V3    "c:\program files (x86)\unified remote 3\remoteserverwin.exe"    DESKTOP-DSJ0U6D\Sboh-Desktop    HKU\S-1-5-21-2368531627-3883434602-1605957839-1001\SOFTWARE\Microsoft\Windows\CurrentVersion\Run
    Continue with Verifier after doing it. If still the uvhid.sys comes with the BSOD, uninstall Unified Remote 3.
    Arc said:
    Free up the startup. Windows does not need any other program to auto-start with it; but they can conflict which may cause various issues including randm crashes including BSODs.

    1. Right click on the taskbar and click on "Task Manager" in the context menu.
    2. It will open Task Manager with "Processes" tab selected. Click on the "Startup" tab.
    3. Select them all one by one and click "Disable" at the bottom right corner.
    4. Disable everything there other than the antivirus.

    See how it goes. Let us know.
    Let us know the situation upto this point.
      My Computer

  9. Posts : 20
    Thread Starter

    Hmmm looks like i'm getting a few BSOD's again, ahhhh =(

    Can you please help me find what is causing this, thank you in advance
      My Computer

  10. Arc's Avatar
    Posts : 1,626
    Microsoft Windows 10 Home

    Now first let us concentrate on the ASUS Utility\PCE-AC68 WLAN Card.

    Make it sure that you are using the latest, ASUS PCE-AC68 Utility
    ASUS PCE-AC68 Utility
    It is for all sku except EU
    Support OS: Win 7/8/8.1/XP/10

    Updated driver version to 7.35.315.0

    [Please note]This version is driver only. Before installing this version, please uninstall pervious PCE-AC68 utility
    PCE-AC68 | Networking | ASUS India

    Let us know the resulting situation.
    fffff801`a01ac2d8  fffff800`171840f0Unable to load image \SystemRoot\system32\DRIVERS\bcmwl63a.sys, Win32 error 0n2
    *** WARNING: Unable to verify timestamp for bcmwl63a.sys
    *** ERROR: Module load completed but symbols could not be loaded for bcmwl63a.sys
        Image name: bcmwl63a.sys
        Browse all global symbols  functions  data
        Timestamp:        Tue Dec 09 05:35:10 2014 (54863CB6)
      My Computer


Related Threads
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 12:05.
Find Us

Windows 10 Forums