Windows 10: BSOD Memory management ?

Page 1 of 2 12 LastLast
  1.    16 Apr 2016 #1

    BSOD Memory management ?

    Been getting this weird bluescreen just in the last few days, I don't think it's ram because I've ran memtest and 0 errors
      My ComputerSystem Spec

  2. Arc's Avatar
    Posts : 1,643
    Microsoft Windows 10 Home
       16 Apr 2016 #2

     *** Memory manager detected 13 instance(s) of page corruption, target is likely to have memory corruption.
    It may be either a failing RAM or a driver (I suspect Intel RST driver) passing bad information to the memory.
    Let us be confirmed about the RAM at first.

    Test your RAM modules for possible errors. Run memtest86+ for at least 8 consecutive passes.

    If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.
    Take a camera snap of the memtest86+ window before closing the program. Let us see it.
    Screenshots and Files - Upload and Post in Ten Forums - Windows 10 Forums

    If it does not show any error there, we will take our next step.
      My ComputerSystem Spec

  3.    18 Apr 2016 #3

    I've ran memtest with 12 passes and it looks like I have 0 errors

    Microsoft OneDrive - Access files anywhere. Create docs with free Office Online.

    What should be the next step in finding my problem ? thank you
      My ComputerSystem Spec

  4. Arc's Avatar
    Posts : 1,643
    Microsoft Windows 10 Home
       18 Apr 2016 #4

    Next, let us enable Driver Verifier to monitor the drivers.Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.

    information   Information
    Why Driver Verifier:
    It puts a stress on the drivers, ans so it makes the unstable drivers crash. Hopefully the driver that crashes is recorded in the memory dump.

    How Can we know that DV is enabled:
    It will make the system bit of slow, laggy.

    warning   Warning
    Before enabling DV, make it sure that you have earlier System restore points made in your computer. You can check it easily by using CCleaner looking at Tools > System Restore.

    If there is no points, make a System Restore Point manually before enabling DV.

    Tip   Tip

    Let us know the results, with the subsequent crash dumps, if any.
      My ComputerSystem Spec

  5.    24 Apr 2016 #5

    It looks like I crashed immediately

    please find attached my crash dump
      My ComputerSystem Spec

  6.    25 Apr 2016 #6

    The dumpfile blames
    *                                                                             *
    *                        Bugcheck Analysis                                    *
    *                                                                             *
    Use !analyze -v to get detailed debugging information.
    BugCheck C9, {22e, fffff800042a10a0, ffffe0009554e870, 0}
    *** WARNING: Unable to verify timestamp for uvhid.sys
    *** ERROR: Module load completed but symbols could not be loaded for uvhid.sys
    Probably caused by : ntkrnlmp.exe
    Driver Description: Unified Remote HID Mini Driver for Unified Virtual HID
    Driver Update Site: Download:

    It looks like the above program is the culprit.
    Update it to the latest version and/or remove it to see if this stops the BSOD.
      My ComputerSystem Spec

  7.    25 Apr 2016 #7

    Thank you so much, what's the best way to remove ? I just ran the uninstaller
      My ComputerSystem Spec

  8. Arc's Avatar
    Posts : 1,643
    Microsoft Windows 10 Home
       25 Apr 2016 #8

    First of all, disable Unified Remote 3 in startup. Dont let it run alongwith windows in the background.
    Unified Remote V3    "c:\program files (x86)\unified remote 3\remoteserverwin.exe"    DESKTOP-DSJ0U6D\Sboh-Desktop    HKU\S-1-5-21-2368531627-3883434602-1605957839-1001\SOFTWARE\Microsoft\Windows\CurrentVersion\Run
    Continue with Verifier after doing it. If still the uvhid.sys comes with the BSOD, uninstall Unified Remote 3.
    Arc said:
    Free up the startup. Windows does not need any other program to auto-start with it; but they can conflict which may cause various issues including randm crashes including BSODs.

    1. Right click on the taskbar and click on "Task Manager" in the context menu.
    2. It will open Task Manager with "Processes" tab selected. Click on the "Startup" tab.
    3. Select them all one by one and click "Disable" at the bottom right corner.
    4. Disable everything there other than the antivirus.

    See how it goes. Let us know.
    Let us know the situation upto this point.
      My ComputerSystem Spec

  9.    20 Jun 2016 #9

    Hmmm looks like i'm getting a few BSOD's again, ahhhh =(

    Can you please help me find what is causing this, thank you in advance
      My ComputerSystem Spec

  10. Arc's Avatar
    Posts : 1,643
    Microsoft Windows 10 Home
       20 Jun 2016 #10

    Now first let us concentrate on the ASUS Utility\PCE-AC68 WLAN Card.

    Make it sure that you are using the latest, ASUS PCE-AC68 Utility
    ASUS PCE-AC68 Utility
    It is for all sku except EU
    Support OS: Win 7/8/8.1/XP/10

    Updated driver version to 7.35.315.0

    [Please note]This version is driver only. Before installing this version, please uninstall pervious PCE-AC68 utility
    PCE-AC68 | Networking | ASUS India

    Let us know the resulting situation.
    fffff801`a01ac2d8  fffff800`171840f0Unable to load image \SystemRoot\system32\DRIVERS\bcmwl63a.sys, Win32 error 0n2
    *** WARNING: Unable to verify timestamp for bcmwl63a.sys
    *** ERROR: Module load completed but symbols could not be loaded for bcmwl63a.sys
        Image name: bcmwl63a.sys
        Browse all global symbols  functions  data
        Timestamp:        Tue Dec 09 05:35:10 2014 (54863CB6)
      My ComputerSystem Spec

Page 1 of 2 12 LastLast

Related Threads
Alienware BSOD. Memory Management in BSOD Crashes and Debugging
This randomly happend after rebooting my laptop, was not tampering with any drivers or anything. Hopefully someone can figure out whats wrong in total i get 3 different messages across those files. Memory Management being the first and most...
Random BSOD Memory Management issue... in BSOD Crashes and Debugging
Hi I was wondering if someone can help me before I lose my sanity. I built a new system in September and things were going OK until the recent 1511 update to Windows 10. Since then I've been getting a lot of BSOD errors pointing to...
Quite an array of different codes been popping up since I upgraded to windows 10 in the last couple of months irql_not_less_or_equal memory management was another one I have attached several dumps, as I am a bit at my wits end as to...
Solved BSoD Memory Management at Desktop + Ingame in BSOD Crashes and Debugging
Hey guys, I built a new PC and now I have some troubles getting it to work. I get so many bluescreens, most of them appear when I am on the desktop a few minutes after the PC starts (sometimes I can start playing games, but after a few minutes...
Solved BSOD Memory Management (poss. iastor.sys) in BSOD Crashes and Debugging
I downloaded and ran dm_log_collector.exe but it did not generate a zip file. It generated a folder named "SFdebugFiles" containing dumps for the last five days. Is this what is needed? Background: My computer has been running Win-7 Pro for...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 23:42.
Find Us