Windows 10: BSOD Windows 10 Home

Page 1 of 2 12 LastLast

  1. Posts : 7
    Windows 10 Home
       09 Apr 2016 #1

    BSOD Windows 10 Home

    Hello ,

    From the time that i upgrade my laptop to Windows 10, am facing BSOD a lot of times. I made so many formats and resets of laptop because of the BSOD that i have tired to made again reset .

    My last format and reinstall windows was 5 days ago.
    I have not see what the BSOD has write the time that happen.

    Here is my attachment file: Attachment 73972
      My ComputerSystem Spec

  2. Arc's Avatar
    Posts : 1,643
    Microsoft Windows 10 Home
       09 Apr 2016 #2

    Wherefrom you got the nvidia display driver?
    Asking because it is noe driver that is flagging there.
    ffffd000`2c206720  fffff801`a78ab790Unable to load image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, Win32 error 0n2
    *** WARNING: Unable to verify timestamp for nvlddmkm.sys
    *** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
    fffff801`a7000000 fffff801`a7c9c000   nvlddmkm T (no symbols)           
        Loaded symbol image file: nvlddmkm.sys
        Image path: \SystemRoot\system32\DRIVERS\nvlddmkm.sys
        Image name: nvlddmkm.sys
        Browse all global symbols  functions  data
        Timestamp:        Tue Oct 13 21:13:56 2015 (561D26BC)
        CheckSum:         00C5C00A
        ImageSize:        00C9C000
        Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
    Download the latest available nvidia display driver for your laptop model from Download Center: Download Software, Firmware, Drivers & Manuals | Samsung
    Uninstall the installed driver: Display Driver Uninstaller: How to use - Windows 7 Help Forums
    Install the downloaded driver.

    See how it goes. Let us know the result.
      My ComputerSystem Spec

  3. Posts : 7
    Windows 10 Home
    Thread Starter
       19 Apr 2016 #3

    thank you for you answer , i have resolved this problem, i have reinstall the Nvidia Drivers.

    Now i got another BSOD

    here it is
      My ComputerSystem Spec

  4. Arc's Avatar
    Posts : 1,643
    Microsoft Windows 10 Home
       19 Apr 2016 #4

    Do two things.

    ► Download and install Malwarebytes Free version ... scroll down to this page. Boot the computer in safe mode and perform a full scan.

    ► Enable Driver Verifier to monitor the drivers.Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.

    information   Information
    Why Driver Verifier:
    It puts a stress on the drivers, ans so it makes the unstable drivers crash. Hopefully the driver that crashes is recorded in the memory dump.

    How Can we know that DV is enabled:
    It will make the system bit of slow, laggy.

    warning   Warning
    Before enabling DV, make it sure that you have earlier System restore points made in your computer. You can check it easily by using CCleaner looking at Tools > System Restore.

    If there is no points, make a System Restore Point manually before enabling DV.

    Tip   Tip

    Let us know the results, with the subsequent crash dumps, if any.

    ** If you have anything installed from an unknown/warez source, uninstall it.
    A driver has overrun a stack-based buffer.  This overrun could potentially
    allow a malicious user to gain control of this machine.
    A driver overran a stack-based buffer (or local variable) in a way that would
    have overwritten the function's return address and jumped back to an arbitrary
    address when the function returned.  This is the classic "buffer overrun"
    hacking attack and the system has been brought down to prevent a malicious user
    from gaining complete control of it.
    Do a kb to get a stack backtrace -- the last routine on the stack before the
    buffer overrun handlers and bugcheck call is the one that overran its local
    Arg1: 0000000000000000, Actual security check cookie from the stack
    Arg2: 000057ffc2fb06cf, Expected security check cookie
    Arg3: ffffa8003d04f930, Complement of the expected security check cookie
    Arg4: 0000000000000000, zero
      My ComputerSystem Spec

  5. Posts : 7
    Windows 10 Home
    Thread Starter
       20 Apr 2016 #5

    Hello Arc thank you for you reply, i have do it and the 24hour has pass without BSOD, what should i do now?
      My ComputerSystem Spec

  6. Posts : 7
    Windows 10 Home
    Thread Starter
       20 Apr 2016 #6

    i go another BSOD right now Driver Verifier Enable

    Attachment 75792
      My ComputerSystem Spec

  7. axe0's Avatar
    Posts : 13,723
    Windows 10 Pro
       22 Apr 2016 #7

    As Arc is gone for a few days, I'll see if I can help :)
    Driver verifier did not flag any driver, this usually is indicative of another problem then drivers (usually hardware), please follow below instructions carefully to test the memory.

    A question, is there a BIOS update available at the support page of Samsung?

    BSOD Windows 10 Home Diagnostic Test BSOD Windows 10 Home

    Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 10 Forums

    Note   Note

    MemTest86+ needs to be run for at least 8 complete passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.

    If errors show up you can stop the test, remove all sticks but 1 and test this single stick in each slot for 8 passes or until errors show, switch sticks and repeat.
    If errors show up and you see them a lot later, no problem, the errors don't affect the test.
      My ComputersSystem Spec

  8. Posts : 7
    Windows 10 Home
    Thread Starter
       23 Apr 2016 #8

    Hello Axe0 i have made the memory test, and the errors was 0 ... is that anything else that i can do ?
      My ComputerSystem Spec

  9. Arc's Avatar
    Posts : 1,643
    Microsoft Windows 10 Home
       23 Apr 2016 #9

    Hi @mamito, If I have been in your place, I would have tried a clean reinstall of windows in this stage.
      My ComputerSystem Spec

  10. Posts : 7
    Windows 10 Home
    Thread Starter
       25 Apr 2016 #10

    Thank you Arc for the fast reply i have try and this, 4 months now i have format the pc 3 times.

    I will try it again :)

    thank you for the help both of you

    was very super for me :)

    thank you again
      My ComputerSystem Spec

Page 1 of 2 12 LastLast

Related Threads
Several BSOD - Windows 10 Home x64 in BSOD Crashes and Debugging
I installed Windows 10 Home x64 during Christmas festivities. It is a clean install. Although I'm using the OS without licence (I'm planning to buy the license when price drops on amazon), it works well, except for several BSOD occurred during...
can someone help me sort this? I have a bunch of devices on my lan, some by ethernet some wireless. One Windows 10 Pro desktop, on ethernet, serves all the other devices - at least in theory. Working well, no big issues. But with my Windows 10...
Solved Constant BSOD on home built Windows 10 PC in BSOD Crashes and Debugging
Hello! For some time now, I have been having BSOD issues that have recently been occurring about once every hour and become unbearable. I have tried to do some research on the minidumps, but honestly, I have no idea what could be the root of the...
Hi, I get a BSOD ranging from every hour to every couple hours, either during normal use or while I am away. I built my PC a few days ago and the first couple days I had no problems. This has been going on since yesterday. File is attached. Thank...
Dear Tenforums Gurus, I upgraded my father's old desktop from Windows 7 to Windows 10. Ever since its been installed, 4 days now, the computer has been very unstable with BSOD events happening on a regular basis (IRQL_NOT_LESS_OR_EQUAL). I have...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 14:41.
Find Us