IRQL , Pool Curroption , Memory management HELP!

Blippo3k · 04 Apr 2016

Hi,

So for the past two weeks i have been recieving lots of BSOD's.
Most of them are IRQL not less than Equal , then memory management.
I have tried doing the driver verification only to have it consitantly loop (which is what it supposed to do) for me to then turn it off in safemode.
I have also done a system restore with the same thing to happen.
I have also tried using Driver uninstaller DDU and reinstalling my driver for my gtx 970
I have also tried reseating my gfx card.
Oh and i did a complete reinstall yesterday (only to find a blue screen when i came home from being out for 2 hours).

Essentially im out of idea's and i need some help with what this is.

Attached is my log collector dump if some one could please decipher and let me know which bit of hardware i need to send to a farm upstate.

Thanks in advance.
Attachment 73001

zztemp · 04 Apr 2016

<ToolVersion>10.0.10240.16384</ToolVersion>
<LicensingStatus>SL_LICENSING_STATUS_NOTIFICATION</LicensingStatus>
<LicensingStatusReason>0xC004F034</LicensingStatusReason>
<LocalGenuineState></LocalGenuineState>

It looks like you do not have a genuine windows.
You're license might be valid (i don't know) but is certainly not activated.
Please fix this first.

Forum rules

4) No piracy or discussion of piracy allowed at all. Such as software, music, videos and other intellectual property violations (e.g. downloading youtube videos locally etc).

According to forum rules, we can not help you until this is resolved.
When you have this sorted out, we will be happy to assist!!

Arc · 04 Apr 2016

There are various different BSODs, mostly they are memory related.

And, the windows is not up to date.

Code:

Windows 10 Kernel Version 10240 MP (4 procs) Free x64

Test your RAM modules for possible errors.

MemTest86+ - Test RAM

Run memtest86+ for at least 8 consecutive passes.

If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.
Take a camera snap of the memtest86+ window before closing the program. Let us see it.
Screenshots and Files - Upload and Post in Ten Forums - Windows 10 Forums

If memtest86+ does not show any error, update windows. Windows Update - Check for and Install in Windows 10 - Windows 10 Forums

Then report us how it goes.

Blippo3k · 04 Apr 2016

Apologies have resolved that now

Please see attached ( i reran the tool just to get a new genuine text
Attachment 73116

now on to the memtest i left it over night and it came back errors on pass 4

Attachment 73117

Am i going to have to buy new RAM?

axe0 · 05 Apr 2016

If errors show up you can stop the test, remove all sticks but 1 and test this single stick in each slot for 8 passes or until errors show, switch sticks and repeat.
If errors show up and you see them a lot later, no problem, the errors don't affect the test.
This to determine if a slot is at fault or a stick.

Arc · 05 Apr 2016

Blippo3k said:

Am i going to have to buy new RAM?

Better you complete the "Results & Extended Testing" part of the test.

It will consume some more time, but it will discriminate between a RAM stick caused memory error and a DIMM slot caused memory error.

If it is a RAM stick caused memory error, you have to buy new RAM. But if it is a DIMM slot caused memory error, new RAM would not be helpful.

EDIT: I am not asking about the genuine windows test results. I want you to update windows. The latest windows 10 version is :

Code:

Version    10.0.10586 Build 10586

Whereas yours is 10240.
If windows is not up-to-date, it is vulnerable to various threats including security threat and BSOD.

Blippo3k · 11 Apr 2016

Hello!
Sorry thought i got back to you all.
Thank you for your help i ended up testing all the ram and all the slots andnyeah it was 1 stick in the kit so with the assistance of pictures and a receipt i got it replaced and havent had any problems simce.

Arc · 12 Apr 2016