Windows 10: BSOD ntoskrnl.exe+14d2e9

Page 1 of 2 12 LastLast
  1.    27 Mar 2016 #1

    BSOD ntoskrnl.exe+14d2e9


    Cant understand which driver cause that BSOD
      My ComputerSystem Spec


  2. Posts : 1,648
    Microsoft Windows 10 Home
       27 Mar 2016 #2

    Hi mrphua81.

    Your motherboard says about its RAM support .....
    - Supports DDR2 1066*/800/667/533 non-ECC, un-buffered memory
    And all the four of your RAM modules are running at ......
    Code:
      Speed                         333MHz
    That may be enough cause of your BSODs.

    Either increase the RAM speed to at least 533, if possible; or get at least 4 GB of DDR2 RAM running at the required and supported speed by the motherboard.

    See how it goes. Let us know.
    ___________________________________________________________
    Code:
    BugCheck A, {ffffe0010401e778, 2, 0, fffff803842ff349}
    
    Probably caused by : ntkrnlmp.exe ( nt!KiInsertTimerTable+199 )
    
    Followup:     MachineOwner
    ---------
      My ComputerSystem Spec

  3.    27 Mar 2016 #3

    same error now ntoskrnl.exe+38cb5
      My ComputerSystem Spec


  4. Posts : 1,648
    Microsoft Windows 10 Home
       27 Mar 2016 #4

    Please do what stated in post #2.
      My ComputerSystem Spec

  5.    27 Mar 2016 #5

    I did it already... and it didn't help... got BSOD in 10 min after reboot in Dota2
      My ComputerSystem Spec


  6. Posts : 1,648
    Microsoft Windows 10 Home
       27 Mar 2016 #6

    If you report a BSOD, please provide the dump so that we can check and see what is going on.

    Post a reply following the Blue Screen of Death (BSOD) Posting Instructions .
      My ComputerSystem Spec

  7.    27 Mar 2016 #7

    Here we go
      My ComputerSystem Spec


  8. Posts : 1,648
    Microsoft Windows 10 Home
       27 Mar 2016 #8

    Your present RAM speed:
    Code:
      Speed                         200MHz
    Before that, it was ....
    Code:
      Speed                         333MHz
    Your motherboard supports .....Can your RAM run at any of those speeds? Make it sure. It it can, set those to any of those speeds.
    If it cannot, change the RAM.

    As far as you will not run the RAM with the speed that is supported by the motherboard, the BSODs will be there and before fixing it, troubleshooting cannot proceed.

    I hope you understand. It is about hardware compatibility.
      My ComputerSystem Spec

  9.    27 Mar 2016 #9

    I set in Bios 400*800 due to RAM specification... whats next?
      My ComputerSystem Spec


  10. Posts : 1,648
    Microsoft Windows 10 Home
       27 Mar 2016 #10

    mrphua81 said: View Post
    I set in Bios 400*800 due to RAM specification... whats next?
    Sorry I failed to understand you. What actually have you done?
      My ComputerSystem Spec


 
Page 1 of 2 12 LastLast

Related Threads
BSOD - ntoskrnl.exe in BSOD Crashes and Debugging
I've been getting this BOSD error atlease once a day =( Can you please let me know if it a driver that I need to uninstall, or mabey a ram is bad ? I will appreciate this so much ! thank you in advanced I've attached the DMP files I've...
Solved BSoD ntoskrnl.exe in BSOD Crashes and Debugging
So I've had this BSoD three times while playing on a game (Squad). These all occurred randomly within games and the Error calls itself 'page fault in nonpaged area'. Upon checking the dmp file with BluescreenViewer it highlights the ntoskrnl.exe....
NTOSkrnl+14d2e9 - Help Appreciated in BSOD Crashes and Debugging
Having BSODs daily. Would appreciate the help. File attached.62888
I have a computer with i5 3570k and an ASROCK Z77 Pro4 I have windows 10 and I got this BSOD. I have been trying to get an emulator named Dolphin to be stable and it keeps crashing after a few minutes of playing. Here is my zip 61986
Hello community, this week i got some wired BSOD's and i don't know how to fix it. Today scared me because after another BSOD the message came "scanning and repairing drive c" I really would love to remove all my BSOD. This is my file, really...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 15:53.
Find Us