1. Joined : Mar 2016
    Posts : 2
    Win 10
       18 Mar 2016 #1

    Random BSOD after upgrading to Win10


    Hello Guys,

    I upgraded to Win10 with massive random BSODs. Im like getting crazy, I updated all drivers manuelly, every little device driver I could found but with no luck. I had Win 7 for several years without a single BSOD but after the upgrade it happens on random. Im getting mad with this Win10. Hope you can help me outta this big mess.

    BIG thank you.
      My System SpecsSystem Spec


  2. Joined : Oct 2013
    Tropic of Cancer
    Posts : 1,648
    Microsoft Windows 10 Home
       18 Mar 2016 #2

    I am not saying that it is Kaspersky that has caused the BSOD; but there is a fair chance that it might be the cause.
    Code:
    ffffd000`2192b3f8  fffff801`cb01f26aUnable to load image \SystemRoot\system32\DRIVERS\klif.sys, Win32 error 0n2
    *** WARNING: Unable to verify timestamp for klif.sys
    *** ERROR: Module load completed but symbols could not be loaded for klif.sys
     klif+0x1f26a
    Please uninstall (not disable; disabling just keeps it away from scanning, not from loading the drivers and services) Kaspersky and let us know the resulting situation.

    If the issue continues, we will have to take some further steps.
      My System SpecsSystem Spec


  3. Joined : Mar 2016
    Posts : 2
    Win 10
       17 Apr 2016 #3

    thank you ARC for your fast response and sorry for my late answer.

    I now uninstalled kaspersky as suggested, but with no success. Still got very annoying random reboots, somethimes my PC works for 10 days with not a single reboot, and sometimes it reboots now three times a day. Its horrible.

    Again I attached the log file, hope somebody can help.

    Attachment 75307


    Arc said: View Post
    I am not saying that it is Kaspersky that has caused the BSOD; but there is a fair chance that it might be the cause.
    Code:
    ffffd000`2192b3f8  fffff801`cb01f26aUnable to load image \SystemRoot\system32\DRIVERS\klif.sys, Win32 error 0n2
    *** WARNING: Unable to verify timestamp for klif.sys
    *** ERROR: Module load completed but symbols could not be loaded for klif.sys
     klif+0x1f26a
    Please uninstall (not disable; disabling just keeps it away from scanning, not from loading the drivers and services) Kaspersky and let us know the resulting situation.

    If the issue continues, we will have to take some further steps.
      My System SpecsSystem Spec


  4. Joined : Oct 2013
    Tropic of Cancer
    Posts : 1,648
    Microsoft Windows 10 Home
       17 Apr 2016 #4

    This time it is bit more clear.
    Code:
    Use !analyze -v to get detailed debugging information.
    
    BugCheck 1A, {8887, fffffa8000c03690, fffffa8007048f50, 205}
    
    Probably caused by : hardware_ram ( ZEROED_PAGE_CORRUPTED )
    
    Followup:     MachineOwner
    ---------
    Test your RAM modules for possible errors. Run memtest86+ for at least 8 consecutive passes.

    If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.
    Take a camera snap of the memtest86+ window before closing the program. Let us see it.
      My System SpecsSystem Spec


 


Similar Threads
Thread Forum
BSOD DRIVER_IRQL_NOT_LESS_OR_EQUAL(ndis.sys) after upgrading to Win10
Hi there, I have really annoying BSOD problem. I used to run Windows 8.1 on my laptop and I believe it never crashed. After upgrading to Windows 10 I have had lot of crashes. Sometimes it just shuts down or reboots and sometimes I encounter...
BSOD Crashes and Debugging
Clean Win10, Random DRIVER POWER STATE FAILURE bsod
Please, recently purchased Dell Inspiron laptop and since day #1 have had random DRIVER POWER STATE FAILURE BSOD issues. I seem to have exhausted all the tech support at Dell... I've come away unimpressed. I am not terribly knowledgeable with...
BSOD Crashes and Debugging
Random BSOD-s after upgrading to Windows 10
Hello, here is my problem. I've been using Windows 7 since 4-5 years on my laptop but recently when I upgraded to windows 10 via the free upgrade option, the computer throws random bsod-s on every few days. Thanks!
BSOD Crashes and Debugging
Solved BSOD upgrading to Win10, error PAGE_FAULT_IN_NONPAGED_AREA
I tried to upgrade my laptop to Windows 10 Pro 32bit using the USB installation media (from the media creation tool). However during the first reboot, I encountered a Windows 10 BSOD with the message: PAGE_FAULT_IN_NONPAGED_AREA and was then...
BSOD Crashes and Debugging
Random Multiple Daily BSOD 4 days after Win10 Install
Everything was running smooth. No issues, loving Win 10. Then, the first BSOD came 2 days ago followed by a random BSOD now every 1-3 hours. I have uninstalled many programs attempting to get to as clean of an install as possible but to uninstall...
BSOD Crashes and Debugging
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 09:22.
Find Us
Twitter Facebook Google+



Windows 10 Forums