Windows 10: Thread_stuck_in_device_driver

Page 2 of 4 FirstFirst 1234 LastLast

  1. Posts : 16
    Windows 10 Pro x64
    Thread Starter
       18 Mar 2016 #11

    BorisTheAnimal said: View Post
    harko, please do these two things:

    right click on the Windows logo key in the left bottom corner -> command prompt(admin) and type these commands:

    sfc /scannow - press enter and let it run, it might take some time.

    Dism /Online /Cleanup-Image /CheckHealth - same as above, press enter and let it run.

    So I did this sfc scan and got the following:

    "Verification 100% complete.
    Windows Resource Protection found corrupt files and successfully repaired
    them. Details are included in the CBS.Log windir\Logs\CBS\CBS.log. For
    example C:\Windows\Logs\CBS\CBS.log. Note that logging is currently not
    supported in offline servicing scenarios."
    Dism returned the following:

    Deployment Image Servicing and Management tool
    Version: 10.0.10586.0
    Image Version: 10.0.10586.0
    No component store corruption detected.
    The operation completed successfully.

    I attached this log from sfc.
      My ComputerSystem Spec

  2.    18 Mar 2016 #12

    Alright thanks, I'll have a look tomorrow, off to bed!
      My ComputerSystem Spec

  3. Posts : 13,354
    Windows 10 Pro
       19 Mar 2016 #13

    The SFC log isn't required, it is ONLY required when SFC cannot fix the problem(s) :)
      My ComputersSystem Spec

  4. Posts : 13,354
    Windows 10 Pro
       19 Mar 2016 #14

    harko said: View Post
    As much as it's reasonable to think my gpu is faulty there is as much reason to think it's not. I mean, I tried it in another configuration few days ago (after I got this issue) and it worked like the first day I bought it. It still does the job even on my computer, only problem is that damn startup. At my friend's computer there was no startup issues whatsoever, but here on mine there is.
    Is it possible that my motherboard is one to blame, I kinda get that feeling because that's the only thing that we cannot really test. Is there a way that there's some hardware related issue on motherboard that make's it look like it's GPU's fault when in fact, that's not the case??
    That could be, but that is usually a very last resort as there are a lot of things to try before.

    I've been digging a bit through the event logs, because you say the problem occurs at startup, that makes me think this might be a fast startup problem and fast startup errors occur in the event logs.
    Please disable fast startup and let us know if it helps :
    Fast Startup - Turn On or Off in Windows 10 - Windows 10 Forums
    Event[1144]:  Log Name: System
      Source: Microsoft-Windows-Kernel-Boot
      Date: 2016-03-18T01:25:17.628
      Event ID: 29
      Task: N/A
      Level: Error
      Opcode: Info
      Keyword: N/A
      User: S-1-5-18
      Computer: DESKTOP-8Q27U7R
    Windows failed fast startup with error status 0xC0000001.
      My ComputersSystem Spec

  5.    19 Mar 2016 #15

    In the SFC log it says that opencl.dll was fixed and I bet that this was the issue you had with the GPU.
      My ComputerSystem Spec

  6. Posts : 13,354
    Windows 10 Pro
       19 Mar 2016 #16

    Opencl.dll was replaced with a driver update for the GPU, but it has no effect on the performance and stability of the system, that has been tested. It is nothing to worry about :)
      My ComputersSystem Spec

  7.    19 Mar 2016 #17

    axe0 said: View Post
    Opencl.dll was replaced with a driver update for the GPU, but it has no effect on the performance and stability of the system, that has been tested. It is nothing to worry about :)
    Not really, he did the install earlier.

    2016-03-19 01:03:48, Info                  CSI    00005179 [SR] Repairing corrupted file [l:23 ml:24]"\??\C:\WINDOWS\SysWOW64"\[l:10]"opencl.dll" from store
      My ComputerSystem Spec

  • Posts : 13,354
    Windows 10 Pro
       19 Mar 2016 #18

    What do you mean?

    Opencl.dll is replaced with an update of the GPU drivers, because of that it was being flagged as corrupted.
      My ComputersSystem Spec

  •    19 Mar 2016 #19

    What I meant was that the file was corrupted and if he hadn't run SFC, we would never have thought of it.

    harko, have you tried running any game since you did the scans?
      My ComputerSystem Spec

  • Posts : 13,354
    Windows 10 Pro
       19 Mar 2016 #20

    It wouldn't have mattered
      My ComputersSystem Spec

    Page 2 of 4 FirstFirst 1234 LastLast

    Related Threads
    BSOD THREAD_STUCK_IN_DEVICE_DRIVER 0x100000ea in BSOD Crashes and Debugging
    I was away from the pc having dinner came back and noticed pc had rebooted itself before i left the pc to have dinner I had edge browser open with a few tabs running and toview app running for the tv I believe I had a update installed Security...
    BSOD THREAD_STUCK_IN_DEVICE_DRIVER error in BSOD Crashes and Debugging
    Hi there, I've a problem when playing games or attempting to update my processor, at the moment when I try to update to amd Catalyst Software Suite 15.7.1 I get the BSOD in the title. I've run sfc/scannow multiple times and it's showed no errors...
    30761 30762 Hey, So i was just browsing facebook and clicked on a link and the computer froze up and the screen blanked out. There was no display after a split second but I had to manually restart the computer. I presumed it was a BSOD and...
    PC Specs: i7-3770k 16GB RAM (8GB @ 1600, 8GB @ 2400 --> both set to run @ 1600 in BIOS) AMD 7950 3GB Sabertooth Z77 2 SSDs + multiple HDDs EVGA 850w PSU If I leave my PC idle for about 15 minutes, I'll hear the motherboard-beep, meaning...
    Our Sites
    Site Links
    About Us
    Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

    Designer Media Ltd
    All times are GMT -5. The time now is 00:37.
    Find Us