Windows 10: Constant BSOD While Gaming

Page 1 of 2 12 LastLast
  1.    12 Mar 2016 #1

    Constant BSOD While Gaming


    I have gotten the following BSOD's pretty consistently lately.

    KMODE_EXCEPTION_NOT_HANDLED
    KERNEL_SECURITY_CHECK_FAILURE
    DRIVER_IRQL_NOT_LESS_OR_EQUAL (dxgmms2.sys)

    I have been playing Rise of the Tomb Raider using mostly the settings suggested by GeForce Experience except for a few added settings like hair etc. When I can play, everything runs perfectly fine, no artifacts and nice smooth frame rates. The crashes usually occur after about 15-20 minutes of gameplay, but once I get a crash and try to load the game back up again, I usually only get a few minutes.

    I even recently got a crash playing Rocket League of all things.

    I played through Starcraft 2 Legacy of the Void without any issues.

    Fallout 4 would crash every now and then, but was better after they released an SLI profile for the game.

    I have the latest Nvidia Drivers as of today and they were installed after running DDU to clean out my old drivers and I installed the latest drivers clean. I am going to run a MemTest tonight and I will run an IntelBurnTest shortly to rule out those issues. I never have any issues except when gaming.

    EDIT: I was reading through some other posts and saw that someone wasnt on the lastest windows 10 build. Turns out I wasnt either. I have since run system update and am now on the latest Windows 10 build.
    Last edited by billin30; 12 Mar 2016 at 14:33.
      My ComputerSystem Spec


  2. Posts : 12,505
    Windows 10 Pro
       12 Mar 2016 #2

    Please remove the OC'ing, your motherboard supports it but for troubleshooting it is best to remove all OC'ing on your system.
    Support for DDR3 3000(O.C.) / 2933(O.C.) / 2800(O.C.) / 2666(O.C.) / 2600(O.C.) / 2500(O.C.) / 2400(O.C.) / 2200(O.C.) / 2133(O.C.) / 2000(O.C.) / 1866(O.C.) / 1800(O.C.) / 1600 / 1333 MHz memory modules
    Code:
    [Memory Device (Type 17) - Length 34 - Handle 0042h]
      Physical Memory Array Handle  0007h
      Memory Error Info Handle      [Not Provided]
      Total Width                   64 bits
      Data Width                    64 bits
      Size                          4096MB
      Form Factor                   09h - DIMM
      Device Set                    [None]
      Device Locator                ChannelA-DIMM0
      Bank Locator                  BANK 0
      Memory Type                   18h - Specification Reserved
      Type Detail                   0080h - Synchronous
      Speed                         2400MHz
      Manufacturer                  0420
      Serial Number                         
      Asset Tag Number                        
      Part Number                   F3-2400C10-4GTX
    I am going to run a MemTest tonight and I will run an IntelBurnTest shortly to rule out those issues.
    Let me know what the results of the tests are FYI I have added my post of MemTest86+ in a quote.


    Constant BSOD While Gaming Diagnostic Test Constant BSOD While Gaming
     RAM TEST

    Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 10 Forums

    Note   Note


    MemTest86+ needs to be run for at least 8 complete passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.

    Addition:
    If errors show up you can stop the test, remove all sticks but 1 and test this single stick in each slot for 8 passes or until errors show, switch sticks and repeat.
    If errors show up and you see them a lot later, no problem, the errors don't affect the test.
      My ComputersSystem Spec

  3.    12 Mar 2016 #3

    Thanks for the response. My memory is rated for 2400 Mhz. I just activated an XMP profile to set it to its rated speed and did no other overclocking. I will run Memtest tonight with the OC still on and see if there is any issue. If it throws an error, I will deactivate the XMP profille and try again.

    My gut tells me my issues have something to do with SLI. I had no issues when i was just running one 770, but I have had nothing but issues since I added that second card. The second card is the exact same card as my original, so that shouldn't be an issue.

    I will post back with my Memtest findings in the morning.

    Thanks
      My ComputerSystem Spec

  4.    13 Mar 2016 #4

    My Memtest just finished its 8th pass and no errors were detected. For some reason it wont let me attach the image

    Last night I also ran a few runs of x264 and everything looked fine, no crashed. I did 10 passes of that.

    I also ran the Heaven GPU stress test on max settings and it ran fine with no issues.

    Thanks
      My ComputerSystem Spec


  5. Posts : 12,505
    Windows 10 Pro
       13 Mar 2016 #5

    What is the current XMP setting?
      My ComputersSystem Spec

  6.    13 Mar 2016 #6

    I just selected one of the XMP profiles that were already available in the BIOS.
      My ComputerSystem Spec


  7. Posts : 12,505
    Windows 10 Pro
       13 Mar 2016 #7

    Ok, but what is the current XMP setting?
      My ComputersSystem Spec

  8.    13 Mar 2016 #8

    I attached an image of my BIOS showing the Memory settings. Let me know if you need to see deeper into something.
      My ComputerSystem Spec


  9. Posts : 12,505
    Windows 10 Pro
       13 Mar 2016 #9

    Please set the frequency and voltage of the memory to stock.
    Code:
    Series	TridentX	
    Memory Type	DDR3	
    Capacity	16GB (8GBx2)	
    Multi-Channel Kit	Dual Channel Kit	
    Tested Speed	2400MHz	
    Tested Latency	10-12-12-31-2N	
    Tested Voltage	1.65v	
    Registered/Unbuffered	Unbuffered	
    Error Checking	Non-ECC	
    SPD Speed	1333MHz	
    SPD Voltage	1.50v	
    Fan lncluded	No	
    Height	54 mm / 2.13 inch	
    Warranty	Lifetime	
    Features	Intel XMP (Extreme Memory Profile) Ready
      My ComputersSystem Spec

  10.    13 Mar 2016 #10

    I can do that. I will just turn the XMP profile to Disabled. What is the next step after that? Should I just try to play games like normal and see what happens? Just trying to get an idea of how we are going to troubleshoot next.
      My ComputerSystem Spec


 
Page 1 of 2 12 LastLast

Related Threads
Solved Constant BSOD in BSOD Crashes and Debugging
I seem to be getting a fairly regular BSOD. Sometimes it will sit idle and just BSOD randomly. I tried using WhoCrashed and it looked like it was because of my graphics card driver. I turned on the driver verifier which made my system not boot at...
Constant BSOD while gaming in BSOD Crashes and Debugging
Hi guys, I have a pretty new laptop and have so far been unable to do any gaming on it as I get constant BSOD. I sometimes get 'display driver nvidia windows kernel xxx.xx has stopped responding' (which has happened no matter which nvidia driver...
BSOD constant crashes even after trying to fix in BSOD Crashes and Debugging
ive updated and checked up on all of my drivers and in the scan they seem to be fine and completely up to date, and for a day after I didn't have any more problems but the problem recently started up again, and I haven't been able to open up any of...
Constant BSOD in BSOD Crashes and Debugging
I can be doing almost anything and out of nowhere I will get a BSOD stating thread_stuck_in_device_driver. This has been going on since the fall windows 10 update. Last night I restored windows 10 and even with a fresh install with minimal items...
BSOD when gaming and not gaming in BSOD Crashes and Debugging
BSOD persists after fresh install of Windows 10 from windows 8.1, happens when playing heroes of the storm quite often but has happened while browsing pinterest/facebook.
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 02:38.
Find Us