1.    09 Mar 2016 #1
    Join Date : Mar 2016
    Posts : 4
    Windows 10

    Multiple Different BSOD with Windows 10


    I've been working on this problem for 4 days now, and i have made no headway, i get all sorts of different BSOD's, have done 3 fresh installs of windows 10, 2 of windows 7, i will include the latest 2 dumps (only had this install up and running for 2 hours now...

    Hopefully someone else can make heads or tails of this, i've more or less assumed its the motherboard, my old ram tested with 1.6m + errors on test 11 with memtest, replaced it with new and it wasn't the issue, but i assume the motherboard affected the ram, or i was getting false positives with memtest because of a faulty motherboard. I can return the motherboard and just get it replaced (2 year replacement plan with microcenter) so thats the next step, but i figured i'd post here and see if maybe someone else thought it may be software, or something else i could test/fix at home, thanks a lot, and i will update with any necessary infoAttachment 68529
      My ComputerSystem Spec
  2.    10 Mar 2016 #2
    Join Date : Oct 2013
    Tropic of Cancer
    Posts : 1,648
    Microsoft Windows 10 Home

    Quote Originally Posted by akatashi View Post
    Hopefully someone else can make heads or tails of this, i've more or less assumed its the motherboard, my old ram tested with 1.6m + errors on test 11 with memtest, replaced it with new and it wasn't the issue, but i assume the motherboard affected the ram, or i was getting false positives with memtest because of a faulty motherboard
    All the possibilities are there. There are multiple different BSODs, but all those are memory failure related.
    Code:
    BugCheck 19, {20, ffffc001f983fcb0, ffffc001f983fe00, 5150309}
    
    fffff8022a7f9520: Unable to get MiVisibleState
    Probably caused by : ntkrnlmp.exe ( nt!AlpcpReceiveMessage+1174 )
    
    Followup:     MachineOwner
    ---------
    Code:
    BugCheck 50, {ffffd00023234dd4, 2, fffff961f025fce5, 1}
    
    
    Could not read faulting driver name
    Probably caused by : win32kfull.sys ( win32kfull!xxxSendMessageToClient+55 )
    
    Followup:     MachineOwner
    ---------
    Have you tested the new RAM too? If not, Test it. Test your RAM modules for possible errors. Run memtest86+ for at least 8 consecutive passes.

    If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.
    Take a camera snap of the memtest86+ window before closing the program. Let us see it.
    Screenshots and Files - Upload and Post in Ten Forums - Windows 10 Forums

    If it is free from errors, apply the RAM sticks in the two non-used ports. See if it behaves the same or not.

    Let us know.
      My ComputerSystem Spec
  3.    10 Mar 2016 #3
    Join Date : Mar 2016
    Posts : 4
    Windows 10
    Thread Starter

    hey Arc, i did test the memory, my first sticks of ram came back with 1.6 million errors in 1 test during memtest, so i attempted with different ram, same outcome, determined it must be the mobo, returned it and got a new one as of today, now that thats solved, i think i've figured out it may be a CPU issue, the CPU is failing prime95 tests (6/8 cores failing in under 1 minute) i am attempting to raise the voltage to solve the rounding error, if all else fails i will return the CPU and get a new one as it may be faulty.

    If there is any other input it would be VERY much appreciated though!
      My ComputerSystem Spec
  4.    10 Mar 2016 #4
    Join Date : Oct 2013
    Tropic of Cancer
    Posts : 1,648
    Microsoft Windows 10 Home

    OK, as you have identified one problem and have taken the necessary actions, see how it goes.
    Report back for any further issue. We will be here.
      My ComputerSystem Spec
  5.    10 Mar 2016 #5
    Join Date : Mar 2016
    Posts : 4
    Windows 10
    Thread Starter

    thank you Arc! I am currently running at 1.5v and 1.285v NB i'm a bit worried to take it higher as i have solid temps (69 with full load on prime95) but i do still have core #1 failing >.< though increasing the voltage has stopped the blue screens thus far, and prime 95 doesn't freeze while running. I plan to run prime95 while sleeping tonight to see how long it takes to get a fatal error with any of them (hopefully none) but what would be safe temps to try and equalize core #1? (ASRock Fatal1ty Performance 970 + AMD FX8370)
      My ComputerSystem Spec
  6.    10 Mar 2016 #6
    Join Date : Oct 2013
    Tropic of Cancer
    Posts : 1,648
    Microsoft Windows 10 Home

    IMHO 80-85 degrees may be considered as maximum allowable increase of temperature.
      My ComputerSystem Spec
  7.    10 Mar 2016 #7
    Join Date : Mar 2016
    Posts : 4
    Windows 10
    Thread Starter

    Okay i will increase a bit more and see where i am at! I ran Prime95 for 8 hours and 27 minutes last night, results were core 2 giving a Fatal Error at 4 mintues in, Core 1 giving a fatal error at 22 minutes in, and the other 6 passing for all 8 hours. So for some reason raising the voltage on a 4.4mhz clock speed is stabilizing my cores. To be honest i don't quite understand WHY its working, or why the normal voltages out of box for the CPU were not enough. (the MOBO i have supports the CPU i have) but at least it is working as of now. I am going to push it to up a bit higher, then give it a few days, i have a 2 year warranty on the CPU so if anything goes wrong i can return it, i'm just afraid it won't matter and i'll have to raise the voltage on a new one as well.

    Thank you for the help Arc! I will again try to post back here in a few days to let you know how all is going and see if i can get stable around 1.6v/1.3v NB
      My ComputerSystem Spec

 


Similar Threads
Thread Forum
Multiple BSOD after upgrading to windows 10
Hi, I have upgraded to Windows 10 (clean install), and I've been getting BSOD saying DRIVER_POWER_STATE_FAILURE. It can happen anytime, but mostly when I'm using google chrome (I am using microsoft edge to post this now). Interestingly enough...
BSOD Crashes and Debugging
Bsod Windows 10 Multiple Bsods Please Help
so in the log file there was also another bsod that was diffrent from these but i had to roolback windows so its gone but its was -page fault in nonpaged area i think the error code ended with 05 or something like that but i think its a ram problem...
BSOD Crashes and Debugging
Multiple BSOD's in Windows 10 10547
I only have 9 dump files but not no clue what these BSOD's mean and how I can fix them Specs Cpu: Amd FX 9590 4.7Ghz Mobo: Asus Crosshair Formula-Z GPU: EVGA GTX 980 SC ACX 2.0 OS : Windows 10 Pro
BSOD Crashes and Debugging
Multiple BSOD's since windows 10 update
I have gotten numerous bsods with different causes since Win10 update. Any help would be appreciated!
BSOD Crashes and Debugging
multiple BSOD, only started tonight on windows 10
hello fellow pc'ers, for the last few months, my pc has been suffering from random BSOD, for various reasons, im really at a loss as to why, i thought it might be windows 8, but the trouble has started tonight and im rather tired of it, can anyone...
BSOD Crashes and Debugging
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 06:16.
Find Us
Twitter Facebook Google+ Ten Forums iOS App Ten Forums Android App



Windows 10 Forums