Page 2 of 2 FirstFirst 12
  1.    08 Mar 2016 #11
    Join Date : Mar 2016
    Posts : 10
    Windows 10
    Thread Starter

    Quote Originally Posted by axe0 View Post


    BSOD with REGISTRY_ERROR after 4 minutes of idle time Diagnostics Test BSOD with REGISTRY_ERROR after 4 minutes of idle time
     HDD TEST

    Run HDTune to
    • scan for errors, no quick scan but full scan
    • check the health,
    • benchmark.

    It may take some time, but please take the time you need to perform it properly.
    Let me know what the results are
    • of the error scan,
    • make a screenshot of the health of every hard drive and post the screenshots,
    • post screenshots with the benchmark of the
      • transfer rate,
      • access time,
      • burst rate,
      • cpu usage.
    I have attached a zip file of the screen captures. To simplify things I have removed two physical hard drives leaving only the SSD and I have removed the ATI card and am using the INTEL built in video. For some reason, the health tab was empty but the rest of the tests look normalish (I think!)

    PS When do you guys sleep!

    Brian
      My ComputerSystem Spec
  2.    08 Mar 2016 #12
    Join Date : Jun 2015
    Posts : 12,683
    Windows 10 Pro

    PS When do you guys sleep!
    This is a world wide open forum, there are different time zones

    It all looks good

    I have a few suggestions for now, more are on the way while there is progress
    1. Testing in safe mode, if it crashes in safe mode you either have a very bad windows (very less occuring) or hardware problems

    2. A clean install/in-place upgrade
    Repair Install Windows 10 with an In-place Upgrade - Windows 10 Forums
      My ComputersSystem Spec
  3.    08 Mar 2016 #13
    Join Date : Mar 2016
    Posts : 10
    Windows 10
    Thread Starter

    Quote Originally Posted by axe0 View Post
    I have a few suggestions for now, more are on the way while there is progress
    1. Testing in safe mode, if it crashes in safe mode you either have a very bad windows (very less occuring) or hardware problems

    2. A clean install/in-place upgrade
    Repair Install Windows 10 with an In-place Upgrade - Windows 10 Forums
    So far, it is looking good. It ran fine for 30 minutes in safe mode so I reinstalled the other two hard drives and the ATI card then did the repair and it has run fine for 2 1/2 hours so far. There are a few errors in the event viewer but nothing that looks fatal. A few service control manager and a couple of remote DCOM messages.

    I am very glad to report that all my installed applications including the win32 ones are fine. I was NOT looking forward to having to do a clean install.

    I am going to leave it over night through a couple of sleep / hibernate cycles and a backup and see what it is looking like in the morning and update you then.

    Thank up for all your patience, support and suggestions.

    Brian
      My ComputerSystem Spec
  4.    09 Mar 2016 #14
    Join Date : Jun 2015
    Posts : 12,683
    Windows 10 Pro

    Keep me posted on the situation
      My ComputersSystem Spec
  5.    09 Mar 2016 #15
    Join Date : Mar 2016
    Posts : 10
    Windows 10
    Thread Starter

    Quote Originally Posted by axe0 View Post
    Keep me posted on the situation
    So far, so good. The PC went to sleep properly and woke up in good shape this morning. No new messages in the event log. Unfortunately the repair install removed my essentials client so I am not sure if it will wake up for the backup and resume sleep. I have reinstalled the connector and will test it tonight.

    It would have been nice to know exactly what was wrong but I am relieved that it appears to be working correctly. It felt a bit like doing brain surgery with a hammer!

    If all appears good tomorrow I will mark this case solved. Thanks again for your help and patience.

    Brian
      My ComputerSystem Spec
  6.    09 Mar 2016 #16
    Join Date : Jun 2015
    Posts : 12,683
    Windows 10 Pro

    The dumps aren't very useful, what happens is returning in a lot 0x51 crashes.
    The 0x51 indicates a registry or configuration problem, so far I understand of what happened is that some registry values and keys were freed, I suspect that a duplicate action was occuring on the same key/value
      My ComputersSystem Spec
  7.    10 Mar 2016 #17
    Join Date : Mar 2016
    Posts : 10
    Windows 10
    Thread Starter

    Quote Originally Posted by bhowden View Post
    So far, so good.
    If all appears good tomorrow I will mark this case solved. Thanks again for your help and patience.

    Brian
    Well, it did not make it through the night but I suspect there isn't really a problem. The computer went to sleep properly, woke up for the backup and then rebooted. The event logs do not show anything unusual and no crashes. The CBS log (attached) looks like it might have been updates forcing a reboot. Other computers in the house also rebooted but at a different time. I will try again tonight.

    Brian
      My ComputerSystem Spec
  8.    10 Mar 2016 #18
    Join Date : Jun 2015
    Posts : 12,683
    Windows 10 Pro

    What exactly is the reason for uploading the CBS?
      My ComputersSystem Spec
  9.    10 Mar 2016 #19
    Join Date : Mar 2016
    Posts : 10
    Windows 10
    Thread Starter

    Quote Originally Posted by axe0 View Post
    What exactly is the reason for uploading the CBS?
    Just trying to be comprehensive in my response. I was not sure if there was a quick way to determine if it was a crash or a normal shutdown caused by the update process (or if you cared at this point).

    Brian
      My ComputerSystem Spec

 
Page 2 of 2 FirstFirst 12


Similar Threads
Thread Forum
Solved BSOD when idle for 4 minutes, REGISTRY_ERROR
Starting on the 17th, which is how far back the dump files should go, my computer began receiving a BSOD with the error "REGISTRY_ERROR" whenever I would leave it idle for about 4 minutes. Previously I've never had any issues with this computer....
BSOD Crashes and Debugging
REGISTRY_ERROR Blue screen when idle
Hi all, I'm experiencing random blue screens (REGISTRY_ERROR) when I idle for 5-10+ minutes. The time is never consistant, but if I leave a game playing in the background I can idle fine. Under heavy load I face no issues, either. I've disabled...
BSOD Crashes and Debugging
How to restart Chrome after PC is idle for several minutes
I am trying to create a kiosk like experience with a win 10 touchscreen PC, where after X# of minutes, it will close and restart Chrome, so that any open tabs will close, and Chrome will open to the default home page. So the effect would be a...
Browsers and Email
BSOD while Idle for 5-10 minutes
Hey Guys. Thanks for taking the time to review my issue. Ive been having it Nonstop for the last month now. Basically what happens is, I get BSOD errors when my computer is idle after about 5-10 min, pretty consistantly. It doesn't happen after a...
BSOD Crashes and Debugging
BSOD on Windows 10 after about 10 minutes idle, cyclic if unattended
Hello fellow members, Since upgrading my vanilla Lenovo desktop to Windows 10, it freezes about 2 times per workday. The mouse won't move but the cursor is visible. The Caps Lock, Scroll Lock and Num Lock buttons won't toggle the keyboard...
BSOD Crashes and Debugging
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 08:58.
Find Us
Twitter Facebook Google+ Ten Forums iOS App Ten Forums Android App



Windows 10 Forums