Page 2 of 9 FirstFirst 1234 ... LastLast

  1. Joined : Mar 2016
    Hawaii
    Posts : 50
    windows 10 home 64 bit
       06 Mar 2016 #11

    Thanks that worked! Memtest is running. So do I just leave it alone all night now? And can i close my laptop while its running?
      My System SpecsSystem Spec


  2. Joined : Jun 2015
    Posts : 10,910
    Windows 10 Pro / Windows 10 TP / Windows 8.1 Pro / Windows 7 Pro
       06 Mar 2016 #12

    Just keep it running and don't close it, it should take about 8-10h but may take longer.
      My System SpecsSystem Spec


  3. Joined : Mar 2016
    Hawaii
    Posts : 50
    windows 10 home 64 bit
       06 Mar 2016 #13

    Ok, got it. Should I leave the charger in as well?
      My System SpecsSystem Spec


  4. Joined : Jun 2015
    Posts : 10,910
    Windows 10 Pro / Windows 10 TP / Windows 8.1 Pro / Windows 7 Pro
       06 Mar 2016 #14

    I would plugin the charger yes, I guess your laptop can't be on for 8h with the battery only.
      My System SpecsSystem Spec


  5. Joined : Mar 2016
    Hawaii
    Posts : 50
    windows 10 home 64 bit
       06 Mar 2016 #15

    Ya, true. Ok axe thanks for your help so far.
      My System SpecsSystem Spec


  6. Joined : Jun 2015
    Posts : 10,910
    Windows 10 Pro / Windows 10 TP / Windows 8.1 Pro / Windows 7 Pro
       06 Mar 2016 #16

    If you haven't read the tutorial proper:

    If you see errors, you can stop the test and do a few things
    1. Return the laptop if there is warranty
    2. Remove all sticks but 1 and test this single stick in each slot for 8 passes or until errors show, switch sticks and repeat.


    If errors show up and you see them a lot later, no problem, the errors don't affect the test.
      My System SpecsSystem Spec


  7. Joined : Mar 2016
    Hawaii
    Posts : 50
    windows 10 home 64 bit
       06 Mar 2016 #17

    And if it doesn't show any errors, will the bsod error stop?
      My System SpecsSystem Spec


  8. Joined : Jun 2015
    Posts : 10,910
    Windows 10 Pro / Windows 10 TP / Windows 8.1 Pro / Windows 7 Pro
       06 Mar 2016 #18

    If it doesn't show errors, it indiciates your memory is fine.
    This is only a diagnostic test, not a fix for the BSOD.
      My System SpecsSystem Spec


  9. Joined : Mar 2016
    Hawaii
    Posts : 50
    windows 10 home 64 bit
       06 Mar 2016 #19

    Ok, so if it doesn't show any errors ill post back here tomorrow then, to fix the bsod?
      My System SpecsSystem Spec


  10. Joined : Jun 2015
    Posts : 10,910
    Windows 10 Pro / Windows 10 TP / Windows 8.1 Pro / Windows 7 Pro
       06 Mar 2016 #20

    I've re-read your OP a few times
    I can't do a system restore, boot into safe mode
    This means either your installation is corrupted (usually not the case) or hardware damage (more frequently occuring)
    If MemTest86+ gives zero errors, you can try following
    • test your hard drive via a few ways, also offline,
    • clean install Windows 10 all over again

    Unfortunately there are no offline (not in Windows) tests for the rest of a system, if all above doesn't help you need to either use your warranty if possible or replace the laptop.
      My System SpecsSystem Spec


 
Page 2 of 9 FirstFirst 1234 ... LastLast


Similar Threads
Thread Forum
Windows 10 BSOD CRITICAL_PROCESS_DIED
I have had an on-going problem with my computer... Computer Specs: i7-3770k Asus Sabertooth Z77 120 GB SSD (OS / A Few Apps / No Page File) 600 WD Raptor (Main Progam Drive / Page File) Defrag Turned Off Windows Defender turned off...
BSOD Crashes and Debugging
Hourly BSOD with the error Critical_Process_Died
About every hour I get a BSOD with the error, Critical_Process_Died. The BSOD completes "gathering info" and when it gets to 100% it does not restart. The only processes I have been running are chrome and trying to do malwarebytes scan. I checked...
BSOD Crashes and Debugging
BSOD Critical_Process_Died
Hello, I have various BSOD Crashes. They occur during normal Browsing. Firstly it was a "Unexpected Store Exception" in the help in another Forum at that time ( 2 weeks ago ) we managed to do a perfect SFC-Scan and a perfect DISM-Scan,...
BSOD Crashes and Debugging
Solved BSOD Critical_Process_Died
The OS (win10Pro) is an upgrade from Win7Ultimate and this BSOD issue only started happening this morning. Unfortunately, my last image is from Friday so I'm not sure that will be of any help either. The diagnostic file is attached. One thing that...
BSOD Crashes and Debugging
Solved Bsod: Critical_process_died
After upgrading to win 10 from win 7 I started to get BSOD CRITICAL_PROCESS_DIED. It always happens after I leave the computer for a while. I tried to read the logs, but I couldn't find anything that could mess things up. Also tried to uninstall...
BSOD Crashes and Debugging
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 18:29.
Find Us
Twitter Facebook Google+



Windows 10 Forums