Windows 10: Various BSOD's on fresh installed win10

  1. Posts : 2
    Microsoft Windows 10 Home
       05 Mar 2016 #1

    Various BSOD's on fresh installed win10


    Laptop ASUS UX305FA
    Fresh installed system crashes every 10-15 mins with various BSODS,
    Please see attached dumps and logs.

      My ComputerSystem Spec

  2. axe0's Avatar
    Posts : 13,720
    Windows 10 Pro
       06 Mar 2016 #2

    Hi Boris Byzov :)

    Welcome to the 10forums.

    I've gone through the event logs a bit, of the 17 dumps that are present at least 11 are memory related.
    For this reason, please follow below instructions to run MemTest86+ to test your memory.

    Various BSOD's on fresh installed win10 Diagnostic Test Various BSOD's on fresh installed win10

    Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 10 Forums

    Note   Note

    MemTest86+ needs to be run for at least 8 complete passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.

    If errors show up you can stop the test, remove all sticks but 1 and test this single stick in each slot for 8 passes or until errors show, switch sticks and repeat.
    If errors show up and you see them a lot later, no problem, the errors don't affect the test.
      My ComputersSystem Spec

  3. Posts : 2
    Microsoft Windows 10 Home
    Thread Starter
       07 Mar 2016 #3

    Good morning,
    I did memtest this night, there was no errors.
      My ComputerSystem Spec

  4. axe0's Avatar
    Posts : 13,720
    Windows 10 Pro
       07 Mar 2016 #4

    Lets test the drivers, please note that there may be more than 1 driver causing problems if any is causing problems.

    Various BSOD's on fresh installed win10 Diagnostic Test Various BSOD's on fresh installed win10

    warning   Warning
    Please make a backup of your important files and get your rescue media or create one.
    Please create a restore point.

    Please follow this tutorial to run driver verifier.

    Driver verifier stresses your drivers and will crash your pc if any driver fails due to a violation.

    Driver verifier should be performed for a max of 48 hours, or when you have a bluescreen, whatever comes first.

    If driver verifier has found a violation and you can't get back into windows normally, try to boot into safe mode and reset in safe mode driver verifier, or in the troubleshooting options open command prompt and type verifier /reset.

    Note   Note
    Your system will act very sluggishly while driver verifier is enabled, this is normal as your drivers will be being subjected to heavy testing in order to make them crash.

    Please fill in your system specs
    Please follow this tutorial and download the tool. The tool will give you detailed information about your system specs, please fill in your system specs more completely.
    How to fill in your system specs:

      My ComputersSystem Spec


Related Threads
I initially installed Windows 10 the 1st week it was available (laptop). 2 weeks ago I bought a new SSD to replace my HD. After creating an image to my SSD I reinstalled windows 10 using its own fresh install feature--no extra stuff that came...
Fresh WIn10 install keeps getting BSODs in BSOD Crashes and Debugging
My old upgraded Win10 install kept crashing so I formatted the drive and put in a fresh one. Still getting all kinds o'f BSOD`s. The second zip file is what I got after running Driver Verifier. Tried running it a few times more, but it seems like...
Solved Fresh install on new laptop w/Win10-Home in Installation and Upgrade
Hello, Just got a new Lenovo laptop with Win-10 Home to replace my older Win-7Pro laptop. This laptop has a whole bunch of junk software that Lenovo has installed. I was wondering what the best way is: - backup the system so in case I...
UAC reverting on Dell laptops fresh install of Win10 in AntiVirus, Firewalls and System Security
I have a dell laptop that I'm attempting to change the UAC settings on. I have logged in as both a machine admin and a domain admin, changed the setting for UAC to notify me only when programs try to make changes to my computer. Then did a reboot....
This is on an old eMachines M6805 laptop that originally came with XP 32-bit. I put a fresh install of Windows 7 32-bit on it which ran fine. I then upgraded that to Windows 10 32-bit. The first time it booted up I was able to log in but got a...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 13:19.
Find Us