BSOD random with new windows 10 install.

Please make sure to get a genuine activation and update your installation

Code:

  <LicensingStatus>SL_LICENSING_STATUS_NOTIFICATION</LicensingStatus>
Hotfix(s):                 N/A

Please run CPU-Z | Softwares | CPUID, open it and make screenshots of the following tabs

• CPU
• Mainboard
• Memory
• SPD*
• Graphics

*SPD shows the details of each module, you can show the details by choosing different slots in the left upper corner.
Please make screenshots of each module.

Please post each screenshot in your next reply/replies.


Most of the crashes are memory related (memory, vram, hard drive, page file) crashes, this usually refers to the memory, however I noticed in a few dumps some references to file system drivers so I would like you to run a memory test and hard drive tests.

Diagnostic Test

 RAM TEST

Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 10 Forums

   Note

MemTest86+ needs to be run for at least 8 complete passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.

Addition:
If errors show up you can stop the test, remove all sticks but 1 and test this single stick in each slot for 8 passes or until errors show, switch sticks and repeat.
If errors show up and you see them a lot later, no problem, the errors don't affect the test.

Diagnostics Test

 HDD TEST

Run SeaTools to check the integrity of your HDD. SeaTools for DOS and Windows - How to Use - Windows 7 Help Forums
Run following tests

1. Short Drive Self Test
2. Short generic
3. Long generic

If the short generic fails, no need for the long generic.

   Note

Do not run SeaTools on an SSD as the results will be invalid.

Run chkdsk
Disk Check - Windows 7 Help Forums

Run HDTune to

• scan for errors, no quick scan but full scan
• check the health,
• benchmark.

It may take some time, but please take the time you need to perform it properly.
Let me know what the results are

• of the error scan,
• make a screenshot of the health of every hard drive and post the screenshots,
• post screenshots with the benchmark of the
  
  • transfer rate,
  • access time,
  • burst rate,
  • cpu usage.

Code:

3: kd> k
 # Child-SP          RetAddr           Call Site
00 ffffd000`21d27088 fffff800`057f61c8 nt!KeBugCheckEx
01 ffffd000`21d27090 fffff800`0572ae9b nt! ?? ::FNODOBFM::`string'+0x178c8
02 ffffd000`21d27150 fffff800`056bd392 nt!MiUnlinkStandbyBatch+0x14b
03 ffffd000`21d271a0 fffff800`056bc0be nt!MmCheckCachedPageStates+0x822
04 ffffd000`21d27340 fffff800`05a58ebf nt!CcFetchDataForRead+0x8e
05 ffffd000`21d273a0 fffff800`056bbe8e nt!CcMapAndCopyFromCache+0xcf
06 ffffd000`21d27440 fffff800`d52cc447 nt!CcCopyReadEx+0xfe
07 ffffd000`21d274b0 fffff800`d47f8124 NTFS!NtfsCopyReadA+0x217
08 ffffd000`21d27740 fffff800`d47f566d FLTMGR!FltpPerformFastIoCall+0xc4
09 ffffd000`21d277a0 fffff800`d4825f09 FLTMGR!FltpPassThroughFastIo+0xbd
0a ffffd000`21d27800 fffff800`05a903f3 FLTMGR!FltpFastIoRead+0x159
0b ffffd000`21d278a0 fffff800`057da7a3 nt!NtReadFile+0x423
0c ffffd000`21d27990 00000000`5a2721bc nt!KiSystemServiceCopyEnd+0x13
0d 00000000`00ddee78 00000000`00000000 0x5a2721bc

Please fill in your system specs

Please follow this tutorial and download the tool. The tool will give you detailed information about your system specs, please fill in your system specs more completely.

How to fill in your system specs:

If you have a memory kit, then it is recommended to do so yes.

I've given a summary of the crashes and you've given the result of a test :)