Windows 10: Random BSODS With different Bsod codes

  1.    04 Mar 2016 #1

    Random BSODS With different Bsod codes


    System specsSony Vaio Sve15136
    OS win 10 single language 64 bit
    Processor Intel core i5
    RAM 4gb
    Graphics AMD Radeon HD 7650M
    I recently upgraded to win 10 .Now getting random bsods with different codes although drivers seem to work fine.
    Last edited by Ujb78600; 05 Mar 2016 at 06:03.
      My ComputerSystem Spec


  2. Posts : 5,150
    Windows 10 Pro X64 15063.483
       04 Mar 2016 #2

    Please follow the instructions at the top of your thread:

    Before posting a BSOD thread, please read the instructions here: Blue Screen of Death (BSOD) Posting Instructions

    If you need to add new information, please make a new post in your initial BSOD thread. Please do not make an extra new thread.

    Please do not post anything other than Windows 10 Blue Screen Of Death problems in this section.
      My ComputersSystem Spec

  3.    06 Mar 2016 #3

    Ztruker said: View Post
    Please follow the instructions at the top of your thread:
    Thanks sir
    Here is my zip file as requested...
      My ComputerSystem Spec


  4. Posts : 5,150
    Windows 10 Pro X64 15063.483
       06 Mar 2016 #4

    Looks like you have a Sony laptop:

    Code:
    Manufacturer                  Sony Corporation
      Product Name                  SVE15136CNS
    The latest dump indicates a problem with the Synaptics touchpad driver.

    Code:
    DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT
    PROCESS_NAME:  SynTPEnh.exe
    Sony does not have any driver updates for Windows 10 for this laptop.
    First, try right clicking on the Synaptics touchpad driver in Device Manager and select Update device driver. Choose the Search automatically option.

    If that doesn't help then you can try the latest driver from Synaptics here: Software Drivers | White Papers | Videos | Synaptics
    You want Windows 10 PS/2 and SMBus Devices v19.0.19.1

    They recommend setting a System Restore point before trying the driver.

    System Restore is off by default in Windows 10 (bad choice by Microsoft in my opinion) though if you upgraded from Windows 8.1 it may be enabled.
    To check, open Control Panel and click on System.
    Click on Advanced system settings then the System Protection tab.
    Select C: then click the Configure button the select Turn on System protection.
    Click Create to make the restore point.

    An earlier dump has some info that points (maybe) to

    Code:
    Image path: \SystemRoot\SysWOW64\WinFLAdrv.sys
        Image name: WinFLAdrv.sys
    Which is part of Folder Lock by Newsoftwares.net. You could try uninstalling Folder Lock for awhile and see if the problem goes away.

    If none of this helps then run sfc /scannow from a Elevated Command Prompt.
    If still no help I suggest saving your data then doing a Clean Install of Windows 10 SL.
    You should backup your current drivers first in case you have problems finding drivers after a clean install.
    See here: Ethernet not working after using recovery drive - Page 2 - Windows 10 Forums

    Don't use any of them unless you can't find better ones. Windows 10 will have drivers for most, if not all of your devices.
      My ComputersSystem Spec

  5.    06 Mar 2016 #5

    Ztruker said: View Post
    Looks like you have a Sony laptop:

    Code:
    Manufacturer                  Sony Corporation
      Product Name                  SVE15136CNS
    The latest dump indicates a problem with the Synaptics touchpad driver.

    Code:
    DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT
    PROCESS_NAME:  SynTPEnh.exe
    Sony does not have any driver updates for Windows 10 for this laptop.
    First, try right clicking on the Synaptics touchpad driver in Device Manager and select Update device driver. Choose the Search automatically option.

    If that doesn't help then you can try the latest driver from Synaptics here: Software Drivers | White Papers | Videos | Synaptics
    You want Windows 10 PS/2 and SMBus Devices v19.0.19.1

    They recommend setting a System Restore point before trying the driver.

    System Restore is off by default in Windows 10 (bad choice by Microsoft in my opinion) though if you upgraded from Windows 8.1 it may be enabled.
    To check, open Control Panel and click on System.
    Click on Advanced system settings then the System Protection tab.
    Select C: then click the Configure button the select Turn on System protection.
    Click Create to make the restore point.

    An earlier dump has some info that points (maybe) to

    Code:
    Image path: \SystemRoot\SysWOW64\WinFLAdrv.sys
        Image name: WinFLAdrv.sys
    Which is part of Folder Lock by Newsoftwares.net. You could try uninstalling Folder Lock for awhile and see if the problem goes away.

    If none of this helps then run sfc /scannow from a Elevated Command Prompt.
    If still no help I suggest saving your data then doing a Clean Install of Windows 10 SL.
    You should backup your current drivers first in case you have problems finding drivers after a clean install.
    See here: Ethernet not working after using recovery drive - Page 2 - Windows 10 Forums

    Don't use any of them unless you can't find better ones. Windows 10 will have drivers for most, if not all of your devices.
    Thanks for a quick reply.
    Actually before upgrading I fully followed Sony website instructions for upgrading to Windows 10 for this this model.
    Updated drivers,utilities via Vaio Update for win 8.1 but after upgrading the first problem I encountered was graphics ,touchpad was working but in control panel clicking on hardware and devices -> mouse it was showing a pop up message driver not compatible.
    Finally I ran windows update it updated audio,synaptic, graphics drivers .
    Important
    I was getting bsods even before Windows update.
    Regarding your suggestions
    1.Device manager update drivers already tried shows upto date
    2.Yeah folder lock wasn't behaving well..already uninstalled
    3. SFC /scannow ran multiple times found no integrity violations.
    May be if I run now will show some because of forced shutdowns . will give it a try.
      My ComputerSystem Spec


  6. Posts : 5,150
    Windows 10 Pro X64 15063.483
       07 Mar 2016 #6

    Also zip up any new dumps and attach please.
      My ComputersSystem Spec


  7. Posts : 5,150
    Windows 10 Pro X64 15063.483
       07 Mar 2016 #7

    It was pointed out to me by a friend that you are quite a bit back level on updates.

    Code:
    OS Version:                10.0.10240 N/A Build 10240
    The current released version is:

    Code:
    Version 1511 Build 10586.122
    Please apply all Windows Updates and see if that resolves your problem.

    Click Start, Settings, Updates & Security.
    Click on Check for Updates.
    Also, might be a good idea to uninstall IOBit Advanced System Care and Daemon Tools Light. See if that makes any difference. You can reinstall if no change if you want them.
      My ComputersSystem Spec

  8.    08 Mar 2016 #8

    Nice to hear back from you.
    What I tried
    1.Uninstalled Amd driver installed via Windows update .
    Checked amd website .using their autodetect installed a new driver ,worked fine .But got a new bsod with err IRQ not equal to right after installing.
    2.i had already tried to install latest synaptics driver but with no success .it won't install correctly. So I uninstalled synaptics installed by Windows update and downgraded to Sony synaptics driver ,it's version is almost 16.****
      My ComputerSystem Spec

  9.    08 Mar 2016 #9

    I'll zip up the dump file created during this process
    Suggestion needed
    Which AMD driver to keep Windows update one or autodetected
    What about synaptics?
    Regarding suggestions
    I'll post back after trying
    Latest dump
    Last edited by Ujb78600; 09 Mar 2016 at 15:51.
      My ComputerSystem Spec

  10.    09 Mar 2016 #10

    What about trying driver verifier?
    An earlier dump file ....
    Last edited by Ujb78600; 09 Mar 2016 at 15:58.
      My ComputerSystem Spec


 

Related Threads
So, new computer, was using Windows 7 and getting BSODs constantly. So I decided to make a clean install with Windows 10 and thought the issue was resolved, clearly not the case. I will be uploading the last mini dump, but let me already tell you...
A couple of BSODs, different error-codes in BSOD Crashes and Debugging
Hi TenForums I updated my 8.1 Pro laptop to 10 Pro a couple of weeks ago, and so far I really like what I see. The only nasty bit about W10 so far has been these BSODs happening every once in a while. After the first few I decided I might need...
Multiple BSOD error codes in BSOD Crashes and Debugging
I updated from windows 7 the day that 10 launched and for a few days everything worked perfectly, then I crashed a few times, and today I crashed three times, all for different reasons. The first crash was a kernell_data_inpage_error. I did...
Hi all, I have a new build with the following specs: MB: Asus Rampage V Extreme/USB3.1 CPU: Intel i7-5930k, currently not OC'ed CPU Cooler: Corsair Hydro Series H100i GTX RAM: Corsair Vengeance LPX 32GB (4 x 8GB) DDR4...
Hello ! Sorry for my english, i'm french. I post here because i think this is the only forum can help me... My situation : I have a configuration with 16Gb of RAM but I have some BSOD with 16Gb when i play games or when i watch videos on netflix...

Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 08:36.
Find Us