Windows 10: Several different BSOD errors Solved

Page 3 of 8 FirstFirst 12345 ... LastLast
  1. Arc's Avatar
    Posts : 1,648
    Microsoft Windows 10 Home
       08 Apr 2016 #21

    greenburrito said: View Post
    I think I should be able to get a card. Do I need to uninstall the card's drivers first before installing the new card?

    If I took a picture of the r9 390, would you be able to tell if there is any damage to the pins or the card in general?
    That will not be very possible, mate. To check the pins, you need to see the reflection of light from the pins from various different angles. If any discrepancy is there, then you may find a pin is corrupt. Photographs are not enough to do it.

    Same for the overall damage. If it is not physically broker, you will not find the damage there externally.
      My System SpecsSystem Spec

  2.    20 Apr 2016 #22

    Maybe this last BSOD (from today) will answer the question. It was hardware corruption error, so hopefully i can figure out if its the gpu or not.
      My System SpecsSystem Spec

  3. Arc's Avatar
    Posts : 1,648
    Microsoft Windows 10 Home
       22 Apr 2016 #23

    Code:
    BugCheck 12B, {ffffffffc00002c4, 34f, 26d01397460, ffffd000206f5000}
    
    Probably caused by : ntkrnlmp.exe ( nt!ST_STORE<SM_TRAITS>::StDmPageError+ec )
    
    Followup:     MachineOwner
    ---------
    0x12B is always a hardware memory error.
    Code:
    *******************************************************************************
    *                                                                             *
    *                        Bugcheck Analysis                                    *
    *                                                                             *
    *******************************************************************************
    
    FAULTY_HARDWARE_CORRUPTED_PAGE (12b)
    This bugcheck indicates that a single bit error was found in this page.  This is a hardware memory error.
    Arguments:
    Arg1: ffffffffc00002c4, virtual address mapping the corrupted page
    Arg2: 000000000000034f, physical page number
    Arg3: 0000026d01397460, zero
    Arg4: ffffd000206f5000, zero
    I see that the RAM is running at the least speed and no error is coming up in RAM test.

    I think it would be better for me to consult with my guru @essenbe at this stage.
      My System SpecsSystem Spec

  4. essenbe's Avatar
    Posts : 7,467
    Windows 10 Enterprise and Pro/Windows 7 Enterprise/Linux Mint
       22 Apr 2016 #24

    Hello greenburrito, I've just briefly looked over this thread. If you will please download, if you don't have it already, CPUz http://www.cpuid.com/softwares/cpu-z.html and post screenshots here of the CPU, Mainboard, Memory and SPD tabs. On the SPD tab select each Dimm slot from a dropdown on the upper left and post screenshots of only the tabs with ram installed. Please post the screenshots here, this will tell you how. Screenshots and Files - Upload and Post in Ten Forums.

    Also, please check the Manufacturer's web site and make sure your SSD firmware is current.
      My System SpecsSystem Spec

  5.    25 Apr 2016 #25

    I updated the SSD firmware, and it doesn't seem to make a difference.

    Attached are the screens of the respective sections of CPU-Z
      My System SpecsSystem Spec

  6. essenbe's Avatar
    Posts : 7,467
    Windows 10 Enterprise and Pro/Windows 7 Enterprise/Linux Mint
       25 Apr 2016 #26

    You say updating the firmware doesn't make any difference, so I am assuming you are still having the BSOD problem. I would like to try 2 things. I am assuming your Dram Voltage is set to 1.20, if it is set lower, increase it to 1.20. If it is set to 1.20 try setting it to 1.25. Your ram timings are within specs, but leave everything like it is but change the CAS Latenct (CL) from 15 to 18 and see if that helps any.

    I don't recall all that you have done, but please right click the start flag and select command prompt (Administrator) and paste this in the window and press enter. Dism /Online /Cleanup-Image /RestoreHealth Let it run. It should give you a success or an error message. It can take it some time to work, just let it run. See if any of that helps any.
      My System SpecsSystem Spec

  7.    01 May 2016 #27

    essenbe said: View Post
    You say updating the firmware doesn't make any difference, so I am assuming you are still having the BSOD problem. I would like to try 2 things. I am assuming your Dram Voltage is set to 1.20, if it is set lower, increase it to 1.20. If it is set to 1.20 try setting it to 1.25. Your ram timings are within specs, but leave everything like it is but change the CAS Latenct (CL) from 15 to 18 and see if that helps any.

    I don't recall all that you have done, but please right click the start flag and select command prompt (Administrator) and paste this in the window and press enter. Dism /Online /Cleanup-Image /RestoreHealth Let it run. It should give you a success or an error message. It can take it some time to work, just let it run. See if any of that helps any.
    Ok, so I found that doing all of the above has made it so that if a game crashes, it doesn't ALWAYS go into a BSOD, it crashes within Windows. However I just had another BSOD titled "CRITICAL PROCESS DIED". I just ran sfc.exe and it found no integrity issues with the core system files. I'm at a loss here, I may have to take this into a shop to do more testing.
      My System SpecsSystem Spec

  8. essenbe's Avatar
    Posts : 7,467
    Windows 10 Enterprise and Pro/Windows 7 Enterprise/Linux Mint
       02 May 2016 #28

    Please upload the BSOD Posting instructions BSOD - Posting Instructions - Windows 10 Forums. Upload them here. This will tell you how Screenshots and Files - Upload and Post in Ten Forums - Windows 10 Forums.
      My System SpecsSystem Spec

  9. essenbe's Avatar
    Posts : 7,467
    Windows 10 Enterprise and Pro/Windows 7 Enterprise/Linux Mint
       02 May 2016 #29

    essenbe said: View Post
    Please upload the BSOD Posting instructions BSOD - Posting Instructions - Windows 10 Forums. Upload them here. This will tell you how Screenshots and Files - Upload and Post in Ten Forums - Windows 10 Forums.
    Did you run memtest86+ again? Also, make sure your system is configured to create small memory dumps. This will show you how.

      My System SpecsSystem Spec

  10.    10 May 2016 #30

    I'm attaching the BSOD from May 2, and a bunch of new ones too. Everything from Chrome to Overwatch has caused a BSOD. I will try the memory test again and post a picture.

    I am also getting Red SOD's. How concerned should I be about that?
      My System SpecsSystem Spec


 
Page 3 of 8 FirstFirst 12345 ... LastLast

Related Threads
Various BSOD errors on new build in BSOD Crashes and Debugging
So since putting together my first Intel build I have been getting all sorts of BSOD errors when booting up my computer. They seem to change pretty often but some of the most common ones have been: MEMORY_MANAGEMENT BAD_POOL_HEADER...
BSOD and windows errors in BSOD Crashes and Debugging
Hello everyone, I'm having some issues with my computer, I have ran the BSOD tool and included the zip. These last days I'm having issues, it started with a program in the middle of my taskbar icons that didn't have an icon, all I could do is...
Solved Repeated BSOD different errors... in BSOD Crashes and Debugging
I've had about 20-30 BSODs since upgrading to win10pro from win8.1 and I'm pretty frustrated. I have not installed any new hardware outside of a new HDD to replace one that recently failed about a month ago. It was not my main boot drive but where I...
Hi, Over the past couple of days I have been having reasonably frequent BSODs. Some have not created a dump file. I cant pinpoint anything in particular but it seems to be pointing to a driver issue but never identifies the driver from what I can...
multiple BSOD errors even just from startup in BSOD Crashes and Debugging
We started with basically hourly BSODs. We had a different processor in the computer and it ran fine for several hours, possibly overnight. That's how we found out it was the processor itself, and replaced it. Now, we are still getting...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 02:20.
Find Us
Twitter Facebook Google+ Ten Forums iOS App Ten Forums Android App



Windows 10 Forums