Page 3 of 5 FirstFirst 12345 LastLast
  1.    13 Mar 2016 #21
    Join Date : Feb 2016
    Posts : 24
    Windows 10 Pro
    Thread Starter

    Quote Originally Posted by axe0 View Post
    Remove Asrock software for testing purpose and test your memory using MemTest86+



    Constant BSOD Diagnostic Test Constant BSOD
     RAM TEST

    Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 10 Forums

    Note   Note


    MemTest86+ needs to be run for at least 8 complete passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.

    Addition:
    If errors show up you can stop the test, remove all sticks but 1 and test this single stick in each slot for 8 passes or until errors show, switch sticks and repeat.
    If errors show up and you see them a lot later, no problem, the errors don't affect the test.
    All ASRock software has been uninstalled and I reboot the PC after the uninstalls were complete.

    MemTest86+ All done. Took over 40 hours to complete, but it passed 8 consecutive passes.
    Attachment 69226
      My ComputerSystem Spec
  2.    13 Mar 2016 #22
    Join Date : Jun 2015
    Posts : 12,952
    Windows 10 Pro

    Specific reasons for using v4.20 instead of v5.01? Just curious
      My ComputersSystem Spec
  3.    13 Mar 2016 #23
    Join Date : Feb 2016
    Posts : 24
    Windows 10 Pro
    Thread Starter

    Quote Originally Posted by axe0 View Post
    Specific reasons for using v4.20 instead of v5.01? Just curious
    Nope... didn't even see that there....does this mean I have to do it all over again?
      My ComputerSystem Spec
  4.    13 Mar 2016 #24
    Join Date : Jun 2015
    Posts : 12,952
    Windows 10 Pro

    Unless I find reasons for it, you don't have to
      My ComputersSystem Spec
  5.    13 Mar 2016 #25
    Join Date : Feb 2016
    Posts : 24
    Windows 10 Pro
    Thread Starter

    Quote Originally Posted by axe0 View Post
    Unless I find reasons for it, you don't have to
    So far its been stable for 4 hours. We'll see though.

    Thanks for the help so far axe0!
      My ComputerSystem Spec
  6.    13 Mar 2016 #26
    Join Date : Jun 2015
    Posts : 12,952
    Windows 10 Pro

    Let me know how it goes within a few days or earlier if another BSOD occurs
      My ComputersSystem Spec
  7.    16 Mar 2016 #27
    Join Date : Feb 2016
    Posts : 24
    Windows 10 Pro
    Thread Starter

    So far so good, but I'd still like to give it a couple more days. Its faked me out like this before . Haha.

    Attachment 69786
      My ComputerSystem Spec
  8.    17 Mar 2016 #28
    Join Date : Jun 2015
    Posts : 12,952
    Windows 10 Pro

    No problem, just keep me posted
      My ComputersSystem Spec
  9.    17 Mar 2016 #29
    Join Date : Feb 2016
    Posts : 24
    Windows 10 Pro
    Thread Starter

    Quote Originally Posted by axe0 View Post
    No problem, just keep me posted
    ...And I Jinxed it... Here's the latest dump...
      My ComputerSystem Spec
  10.    17 Mar 2016 #30
    Join Date : Sep 2015
    Hellsinki
    Posts : 383
    Windows 10 Home

    Hi death2all110.

    The BSOD was caused by b57nd60a.sys which is the driver for Broadcom ethernet adapter.
    The only problem is that I can't find any drivers on the motherboard site. More specifically there aren't any drivers available for Windows 10.

    Cheers, Boris
    Last edited by BorisTheAnimal; 17 Mar 2016 at 08:47.
      My ComputerSystem Spec

 
Page 3 of 5 FirstFirst 12345 LastLast


Similar Threads
Thread Forum
Constant BSOD on new laptop
Hi, I've been getting these BSOD constantly, ever since I got this laptop. Its an edge 15 from Lenovo with a touchscreen. I keep getting PAGE FAULT IN NONPAGED AREA and a couple of DPC WATCHDOG VIOLATION. I read a few threads online and they...
BSOD Crashes and Debugging
Constant BSOD with new hardware
Hi Guys So I recently upgraded some hardware; Core i7 6700; Asus Maximus VIII; Corsair Vengeance 8GB DDR4-2400MHz Kit. The parts that I have kept are my PSU, hard drive, SSD, and GPU (Radeon R9 290). Ever since the upgrade I have had endless...
BSOD Crashes and Debugging
BSOD constant crashes even after trying to fix
ive updated and checked up on all of my drivers and in the scan they seem to be fine and completely up to date, and for a day after I didn't have any more problems but the problem recently started up again, and I haven't been able to open up any of...
BSOD Crashes and Debugging
Constant BSOD
I can be doing almost anything and out of nowhere I will get a BSOD stating thread_stuck_in_device_driver. This has been going on since the fall windows 10 update. Last night I restored windows 10 and even with a fresh install with minimal items...
BSOD Crashes and Debugging
Constant BSOD, BUGCODE_USB_DRIVER Error
I installed Windows 10 a few days ago. Since then, my computer regularly restarts and says it's because of a BUGCODE_USB_DRIVER error. This seems to only be a problem when I have my wireless keyboard and mouse attached through a wireless USB device....
BSOD Crashes and Debugging
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 16:55.
Find Us
Twitter Facebook Google+ Ten Forums iOS App Ten Forums Android App



Windows 10 Forums