BSOD WHEA UNCORRECTABLE or DRIVER IQL NOT EQUAL


  1. Posts : 2
    Windows 10 Pro Build 10586
       #1

    BSOD WHEA UNCORRECTABLE or DRIVER IQL NOT EQUAL


    The BSOD varies from time to time and is almost always WHEA UNCORRECTABLE and some referenced file (usually different, examples are intelppm.sys and netio.sys) I replaced my wife's motherboard with one from another machine that I had and did a clean install of a legitimate copy of Windows 10 Pro. It has been crashing ever since. Although mostly at random times and almost always within a half an hour of being booted, it can be guaranteed if I initiate any download through Steam (how odd, right?)

    I have checked for unsigned drivers, driver conflicts, mismatches, and the like. I have checked for integrity with SFC /SCANNOW and run some diagnostics from the Windows Deployment Toolkit, all to no avail. I have attached a series of the logs as well. Any help would be greatly appreciated!!

    This motherboard did work in other devices directly before being placed into this one, so the hardware seems to be functional.
      My Computer


  2. Posts : 14,903
    Windows 10 Pro
       #2

    The crashes are kinda all over the place what points to many problems from drivers to hardware.




    STOP 0x124 Troubleshooting

    Read carefully before proceeding.



    warning   Warning
    If you're overclocking your system, revert back to stock clocks now.

    Note   Note
    Test the system once the overclock is removed before continuing with the steps outlined below.


    Part One: CPU Stress Test
    Part Two: MemTest86+ RAM Diagnostic
    Part Three: Hard Drive Diagnostics
    Part Four: GPU Stress Test




    ONE

     CPU TEST


    Run Prime95 and/or IntelBurnTest to stress test your CPU. Prime95 - Stress Test Your CPU - Windows 10 Forums & CPU - Stress Test Using IntelBurnTest - Windows 7 Help Forums

    warning   Warning
    Your CPU temperatures will rise quickly while under this stress test. Keep a keen eye on them and abort the test if overheating occurs.





    TWO

     RAM TEST


    Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 10 Forums

    Note   Note


    MemTest86+ needs to be run for at least 8 complete passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking forzero errors here. Even a single error will indicate RAM failure.





    THREE

     HDD TEST


    Run SeaTools to check the integrity of your HDD. SeaTools for DOS and Windows - How to Use - Windows 7 Help Forums
    Run following tests
    1. Short Drive Self Test
    2. Short generic
    3. Long generic

    If the short generic fails, no need for the long generic.

    Note   Note
    Do not run SeaTools on an SSD as the results will be invalid.


    Run chkdsk
    Disk Check - Windows 7 Help Forums

    Run HDTune to
    • scan for errors, no quick scan but full scan
    • check the health,
    • benchmark.

    It may take some time, but please take the time you need to perform it properly.
    Let me know what the results are
    • of the error scan,
    • make a screenshot of the health of every hard drive and post the screenshots,
    • post screenshots with the benchmark of the
      • transfer rate,
      • access time,
      • burst rate,
      • cpu usage.





    FOUR

     GPU TEST


    Run Furmark to stress test your GPU. FurMark - GPU Stress Test - Windows 10 Forums

    Note   Note
    Run Furmark for around 30 minutes.

    warning   Warning
    Your GPU temperatures will rise quickly while Furmark is running. Keep a keen eye on them and abort the test if overheating occurs.
      My Computers


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 18:15.
Find Us




Windows 10 Forums