Page 2 of 3 FirstFirst 123 LastLast

  1. Joined : Feb 2016
    Posts : 13
    Windows 10 x64
       10 Feb 2016 #11

    In the "crimson software" I could set the color scheme of all my connected Displays.

    I guess its the "AMD Settings" part in the advanced settings of the installer.

    EDIT: nevermind, I now got the classic Catalyst Control Center, only accessable via rightclick. Its all there!
      My System SpecsSystem Spec

  2. Joined : Jun 2015
    Posts : 10,897
    Windows 10 Pro / Windows 10 TP / Windows 8.1 Pro / Windows 7 Pro
       10 Feb 2016 #12

    Keep me posted
      My System SpecsSystem Spec

  3. Joined : Feb 2016
    Posts : 13
    Windows 10 x64
       10 Feb 2016 #13

    Of course, I will update the realtek driver when its possible and post here if any other BSOD occurs. Thanks for your help!
      My System SpecsSystem Spec

  4. Joined : Feb 2016
    Posts : 13
    Windows 10 x64
       13 Feb 2016 #14

    Alright, another BSOD just appeared . PAGE_FAULT_IN_NONPAGED_AREA, Crash Address: ntoskrnl.exe (this file appeared in a lot of earlier BSODs if thats any help). I edit the updated .zip in my initial post.
      My System SpecsSystem Spec

  5. Joined : Jun 2015
    Posts : 10,897
    Windows 10 Pro / Windows 10 TP / Windows 8.1 Pro / Windows 7 Pro
       14 Feb 2016 #15

    It seems your motherboard and memory modules don't support each other.
    That could be a reason for the crashes.

    GIGABYTE - Moederbord - Socket 1150 - GA-Z97P-D3 (rev. 1.0)

    Ares - F3-1600C9S-4GAB - G.SKILL DDR3 Memory
      My System SpecsSystem Spec

  6. Joined : Feb 2016
    Posts : 13
    Windows 10 x64
       17 Feb 2016 #16

    I thought its related to my via HDMI connected TV, so I disconnected it for a few days and didnt get any BSODs. Today I got a new one, but in single monitor mode. KMODE_EXCEPTION_NOT_HANDLED caused by NTFS.sys. I edited my initial post with the dumpfiles. Never ending story
      My System SpecsSystem Spec

  7. Joined : Jun 2015
    Posts : 10,897
    Windows 10 Pro / Windows 10 TP / Windows 8.1 Pro / Windows 7 Pro
       17 Feb 2016 #17

    Have you done something with my previous reply?

    NTFS is the Windows File System driver what refers to the hard drive


    Run SeaTools to check the integrity of your HDD. SeaTools for DOS and Windows - How to Use - Windows 7 Help Forums
    Run following tests
    1. Short Drive Self Test
    2. Short generic
    3. Long generic

    If the short generic fails, no need for the long generic.
    Note   Note
    Do not run SeaTools on an SSD as the results will be invalid.

    Run chkdsk
    Disk Check - Windows 7 Help Forums

    Run HDTune to
    • scan for errors, no quick scan but full scan
    • check the health,
    • benchmark.

    It may take some time, but please take the time you need to perform it properly.
    Let me know what the results are
    • of the error scan,
    • make a screenshot of the health of every hard drive and post the screenshots,
    • post screenshots with the benchmark of the
      • transfer rate,
      • access time,
      • burst rate,
      • cpu usage.

    Sorry, I don't have analysed the new files because I don't have the energy for it because of my health.
      My System SpecsSystem Spec

  8. Joined : Feb 2016
    Posts : 13
    Windows 10 x64
       17 Feb 2016 #18

    I have just a SSD in my system so I will only run Disk check and HDTune? I just recently checked my SSD with AS SSD Benchmark - but I will post the results in a few hours! No problemo, health goes first, thanks!
      My System SpecsSystem Spec

  9. Joined : Feb 2016
    Posts : 13
    Windows 10 x64
       17 Feb 2016 #19

    Disk Check finds no errors. Sorry for the big images .
      My System SpecsSystem Spec

  10. Joined : Jun 2015
    Posts : 10,897
    Windows 10 Pro / Windows 10 TP / Windows 8.1 Pro / Windows 7 Pro
       18 Feb 2016 #20

    I have just analysed your last crash dump, it is caused by Intel Rapid Storage Technology drivers.
    You can get IRST drivers from Gigabyte, the manufacturer of your motherboard
    ffffd000`237311e8  fffff800`18d39dacUnable to load image \SystemRoot\System32\drivers\iaStorA.sys, Win32 error 0n2
    *** WARNING: Unable to verify timestamp for iaStorA.sys
    *** ERROR: Module load completed but symbols could not be loaded for iaStorA.sys
    1: kd> lmvm iaStorA
    start             end                 module name
    fffff800`18c80000 fffff800`191f4000   iaStorA  T (no symbols)           
        Loaded symbol image file: iaStorA.sys
        Image path: \SystemRoot\System32\drivers\iaStorA.sys
        Image name: iaStorA.sys
        Timestamp:        Tue Nov 17 17:06:14 2015 (564B5076)
        CheckSum:         00175D9F
        ImageSize:        00574000
        Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
      My System SpecsSystem Spec

Page 2 of 3 FirstFirst 123 LastLast

Similar Threads
Thread Forum
Hello there guys, this has been bugging from a while now. I have been pulling my hair out and cannot seem to find the defect. It happens when I play AC:Revelations and it happens randomly I think, even though I haven't tested it out on anything...
BSOD Crashes and Debugging
BSOD System_Service_Exception (3b)
Been getting this particular BSOD on a near constant basis when running high'ish memory dependent games. After a fair amount of trying to fix it up with sfc, driver verifier and removing near anything I can think of that caused the bug, based on...
BSOD Crashes and Debugging
System_Service_Exception Help
Hello, i have a problem with BSOD. It's System_Service_Exception or something like this. I have this problem only when i am playing. 54093 Thanks.
BSOD Crashes and Debugging
Hello, I am on a desktop computer, and I am trying to upgrade to the latest insider build 10547. It gets to installing drivers, about 32% complete, then I get a BSOD: SYSTEM_SERVICE_ERROR (ks.sys) After a bit of searching I have done...
Installation and Setup
Solved BSOD System_Service_Exception Ks.sys
Hello, I recently clean installed Windows 10. After reinstalling the drivers and software somewhere along the way my connection went down and wouldn't go back up. In the reboot process it froze, so I had to do a force shutdown. As soon as...
BSOD Crashes and Debugging
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 11:08.
Find Us
Twitter Facebook Google+

Windows 10 Forums