Windows 10: BSOD: ntoskrnl.exe and more Solved

Page 3 of 9 FirstFirst 12345 ... LastLast
  1.    07 Feb 2016 #21

    Thanks. My original language from my windows is German, I changed it yesterday for the logs. I followed step > 5. Uncheck the Use the recommended options for this PC box

    which meant that I swapped the language to English instead of the recommended German. A warning popped up, that if I uncheck the box I might need to enter another windows key. Would you still recommend downloading the English version or shall I take the German one?
      My ComputerSystem Spec

  2.    07 Feb 2016 #22

    I downloaded it now, however I fail to create the correct pathing line. Can you help me? I am messing up the \ commands.

    What I enter does not work
    Dism /Online /Cleanup-Image /RestoreHealth /Source:esd:G:\sources \ install.esd file:1 /limitaccess

    Microsoft Windows [Version 10.0.10586]
    (c) 2016 Microsoft Corporation. All rights reserved.


    C:\Windows\system32>Dism /Online /Cleanup-Image /RestoreHealth /Source:esd:G:\Sources\Install.esd:1 /limitaccess


    Deployment Image Servicing and Management tool
    Version: 10.0.10586.0


    Image Version: 10.0.10586.0


    [==========================100.0%==========================]


    Error: 0x800f081f


    The source files could not be found.
    Use the "Source" option to specify the location of the files that are required to restore the feature. For more information on specifying a source location, see Configure a Windows Repair Source.


    The DISM log file can be found at C:\Windows\Logs\DISM\dism.log


    C:\Windows\system32>
      My ComputerSystem Spec


  3. Posts : 13,351
    Windows 10 Pro
       07 Feb 2016 #23

    Try following command, do not add anything or edit!
    Code:
    Dism /Online /Cleanup-Image /RestoreHealth /Source:esd:G:\sources\Install.esd:1
      My ComputersSystem Spec

  4.    07 Feb 2016 #24

    Does not work..
    Microsoft Windows [Version 10.0.10586]
    (c) 2016 Microsoft Corporation. All rights reserved.


    C:\Windows\system32>Dism /Online /Cleanup-Image /RestoreHealth /Source:esd:G:\sources\Install.esd:1


    Deployment Image Servicing and Management tool
    Version: 10.0.10586.0


    Image Version: 10.0.10586.0


    [==========================100.0%==========================]


    Error: 0x800f081f


    The source files could not be found.
    Use the "Source" option to specify the location of the files that are required to restore the feature. For more information on specifying a source location, see Configure a Windows Repair Source.


    The DISM log file can be found at C:\Windows\Logs\DISM\dism.log


    C:\Windows\system32>
      My ComputerSystem Spec

  5.   My ComputersSystem Spec

  6.    08 Feb 2016 #26

    This worked but now I have another blue screen with a new error code. I attached the file for you. Thank you so much for the help and I hope that we figure this out eventually.

    I am afraid that one of my drivers might have corrupted data. Is there a tool you recommend which lists each and every new driver available? Or to put the question differently... how can I update | reinstall each and every driver with making sure that I dont miss a single one ?
      My ComputerSystem Spec

  7.    08 Feb 2016 #27

    edit removed
    Last edited by EUWDIAMOND; 08 Feb 2016 at 19:05.
      My ComputerSystem Spec


  • Posts : 13,351
    Windows 10 Pro
       09 Feb 2016 #28

    Please update the drivers of this network adapter device, after updating please enable driver verifier.
    Driver Reference Table - AE3000w864.sys
    Code:
    Name	[00000000] Linksys AE3000
    Adapter Type	Ethernet 802.3
    Product Type	Linksys AE3000
    Installed	Yes
    PNP Device ID	USB\VID_13B1&PID_003B\1.00
    Last Reset	2/8/2016 11:25 PM
    Index	0
    Service Name	AE3000
    IP Address	192.168.1.113, fe80::99bf:5006:4c8a:dfc
    IP Subnet	255.255.255.0, 64
    Default IP Gateway	192.168.1.1
    DHCP Enabled	Yes
    DHCP Server	192.168.1.1
    DHCP Lease Expires	2/9/2016 11:26 PM
    DHCP Lease Obtained	2/8/2016 11:26 PM
    MAC Address	‪C0:56:27:CB:1A:05‬
    Driver	c:\windows\system32\drivers\ae3000w864.sys (5.0.7.0, 2.27 MB (2,377,216 bytes), 2/27/2013 4:08 PM)



    BSOD: ntoskrnl.exe and more Diagnostic Test BSOD: ntoskrnl.exe and more
     DRIVER VERIFIER

    warning   Warning
    Please make a backup of your important files and get your rescue media or create one.
    Please create a restore point.

    Please follow this tutorial to run driver verifier.

    Driver verifier stresses your drivers and will crash your pc if any driver fails due to a violation.

    Driver verifier should be performed for a max of 48 hours, or when you have a bluescreen, whatever comes first.

    If driver verifier has found a violation and you can't get back into windows normally, try to boot into safe mode and reset in safe mode driver verifier, or in the troubleshooting options open command prompt and type verifier /reset.

    Note   Note
    Your system will act very sluggishly while driver verifier is enabled, this is normal as your drivers will be being subjected to heavy testing in order to make them crash.
      My ComputersSystem Spec

  •    09 Feb 2016 #29

    I updated the ae3000 with the most recent driver and I am currently running driver verifier. Can I keep using my computer, watch videos and play games during the next 48hours until it crashes? And is it normal that I do not notice driver verifier running in the background? I clicked display settings and it appears as if it is running but I do not notice it directly.
      My ComputerSystem Spec


  • Posts : 13,351
    Windows 10 Pro
       09 Feb 2016 #30

    You can use your pc normal.

    It is normal that you don't notice dv running, it happens sometimes, it would also be normal to notice it running.
      My ComputersSystem Spec


  •  
    Page 3 of 9 FirstFirst 12345 ... LastLast

    Related Threads
    BSOD - NTOSKRNL.exe in BSOD Crashes and Debugging
    53020 Hi all I've been getting BSOD since playing Fallout 4. Initially I saw it was Nvidia related so I update my graphics and it seems to have cured that one, however now I've been getting a different error. I ran a memtest and all seemed good,...
    BSOD because of ntoskrnl.exe in BSOD Crashes and Debugging
    Hello guys, I had trouble with my windows 7 : bosd because of ntoskrnl.exe so i decided to do a clean install windows 10 for a new fresh start. But the bsod is still here so i think its probably Hardware problems but wich one ? I've only...
    BSOD ntoskrnl.exe fix? in BSOD Crashes and Debugging
    Computer has been crashing a ton recently and I am looking for a fix, please respond if you know any anything.
    Ntoskrnl.exe Bsod in BSOD Crashes and Debugging
    Hello, i have costume build pc for a years now , i think last year i had to change cooler and its probably when my problems started , or could be later im not sure , basicly now everyday when i first start up pc its getting freezed , if i restart...
    Solved BSOD in ntoskrnl.exe in BSOD Crashes and Debugging
    This is the most recent BSOD. I have no idea on what is causing the problem. I dont know if it's a chipset driver, graphics card issue, sound card issue, or an on the mainboard component that is causing the issue. This morning I was rendering a...
    Our Sites
    Site Links
    About Us
    Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

    © Designer Media Ltd
    All times are GMT -5. The time now is 06:11.
    Find Us