Windows 10: Multiple Different BSODs Solved

Page 1 of 2 12 LastLast
  1.    05 Feb 2016 #1

    Multiple Different BSODs


    Was running clean since installing windows 10 this past summer. Recently within the last few weeks I experienced a few blue screens. After a system restore I am still having issues. This DM log has the last five crashes I believe.

    Any help is appreciated.
      My ComputerSystem Spec


  2. Posts : 12,496
    Windows 10 Pro
       05 Feb 2016 #2




    Multiple Different BSODs Diagnostics Test Multiple Different BSODs
     System File Check

    Please try following:
    • Open an admin command prompt
    • Copy/paste "sfc/scannow" (without quotes) and press enter
    • When it finished reboot your system
    • Open again an admin command prompt
    • Enter sfc/scannow again

    If sfc/scannow says "Windows Resource Protection found corrupt files but was unable to fix some of them" after the second SFC, please upload the cbs.log file located at {windows partition}\Windows\Logs\CBS\, if the file is too large try a 3rd party uploader like dropbox, onedrive, google drive, mediafire etc.
    System File Check(SFC a.k.a. Windows Resource Protection) needs to have your system rebooted in order for sfc to try to fix the problems that it finds.




    Multiple Different BSODs Diagnostic Test Multiple Different BSODs
     RAM TEST

    Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 10 Forums

    Note   Note


    MemTest86+ needs to be run for at least 8 passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.



    The Intel network drivers have been flagged but I believe it is due to memory corruption
    Code:
    ffffd001`135cd428  fffff800`eb13b6dbUnable to load image \SystemRoot\System32\drivers\e1i63x64.sys, Win32 error 0n2
    *** WARNING: Unable to verify timestamp for e1i63x64.sys
    *** ERROR: Module load completed but symbols could not be loaded for e1i63x64.sys
     e1i63x64+0x1b6db
    
    2: kd> lmvm e1i63x64
    start             end                 module name
    fffff801`6cca0000 fffff801`6cd19000   e1i63x64   (deferred)             
        Image path: \SystemRoot\System32\drivers\e1i63x64.sys
        Image name: e1i63x64.sys
        Timestamp:        Thu Mar 26 21:24:57 2015 (55146B19)
        CheckSum:         0007CBC7
        ImageSize:        00079000
        Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
      My ComputersSystem Spec

  3.    05 Feb 2016 #3

    Axe,

    So far I have attempted the System File Check 3 times and have been unable to complete without hitting a bsod/error. I have rerun the dump collector and attached with the new crashes.

    I will continue to attempt to complete an SFC. Please let me know if you have other advice.

    Thanks.
      My ComputerSystem Spec

  4.    05 Feb 2016 #4

    Update: Twice more with two more bsods. All have been a variety of errors, from memory_management, cache_management, bad_pool_header etc.
      My ComputerSystem Spec


  5. Posts : 12,496
    Windows 10 Pro
       05 Feb 2016 #5

    Please call me axe0
    I understand people are using shortcuts for names, but I have never liked that (although I sometimes have used it myself).
    Please note that this is only a request, you don't have to do so but I would appreciate it.

    Please try booting in safe mode and see if you can run the sfc scan, but start with MemTest86+.

    If MemTest86+ and SFC return no problems, then we are dealing with a driver which can be caught with driver verifier (instructions later)
    If MemTest86+ returns even a single error, stop it and run it on each stick in each slot without the other stick in other slots and switch after the first stick is done with testing in the slots.

    If in safe mode the system crashes then it is a hardware error, diagnoses instructions also later.
      My ComputersSystem Spec

  6.    05 Feb 2016 #6

    Thank you axe0, I will attempt this and get back to you.

    -Mestern
      My ComputerSystem Spec

  7.    05 Feb 2016 #7

    axe0,

    I do not have a USB drive handy to execute the memtest at this time. I will run out to the store shortly if necessary.

    However I just attempted to do a sfc in safe mode. My first attempt got to 96% in the verification phase and then returned "resource protection could not complete this operation". My second attempt in safe mode almost instantly triggered a bsod.

    Should I grab supplies to attempt the memtest?

    -Mestern
      My ComputerSystem Spec


  8. Posts : 12,496
    Windows 10 Pro
       05 Feb 2016 #8

    Please try DISM - Repair Windows 10 Image - Windows 10 Forums and after succesful finish run SFC again.
      My ComputersSystem Spec

  9.    05 Feb 2016 #9

    axe0,

    I attempted the DISM Repair running windows normally and ran into a bsod. I then attempted the same thing in safe mode (twice). Both times it seemed to fail but did not bsod. I have attached the DISM log. I do not think this is completing successfully.

    -Mestern
      My ComputerSystem Spec

  10.    05 Feb 2016 #10

    Attaching the latest DISM Log and DM Collection. I can't seem to make any progress in any direction without running into problems.

    A ScanHealth in safe mode returned 'The manifest file contains one or more syntax errors'. However it will not successfully complete a RestoreHealth.

    Please advise!

    -Mestern
      My ComputerSystem Spec


 
Page 1 of 2 12 LastLast

Related Threads
Hey really lost on this one as I have not really dealt with BSODS before. I build my computer a couple months ago. Recently while gaming I have had roughly 5 BSODS. They are all for different things it seems like and I have no clue how to fix it. It...
Solved Multiple Bsods in win10 in BSOD Crashes and Debugging
Greetings all. I have been troubled since day 1 of my custom built windows PC experience ever since i first installed Windows 7 and my reasoning being Bsods. I had the same bsods over and over and over again so as the tech savvy person I am I...
Solved Multiple BSODs in BSOD Crashes and Debugging
Greetings, My computer has been plagued with BSODs for a very long time, I have tried many times to fix them and each time they seem to eventually come back; this is the situation. About a month ago I assumed I had sorted out the issue, but now...
Solved Multiple BSODS in BSOD Crashes and Debugging
I've just recently installed Windows 10 in order to try and fix errors I was getting on Windows 7 with my newly built pc. Good news is that with 10 it worked twice as long before getting the constant BSODS. I've gotten the following BSODS: irql not...
Solved Multiple BSODs in Windows 10 in BSOD Crashes and Debugging
Hi All, I just registered in hope you can help me with my problem. Yesterday I upgraded from Windows 7 to Windows 10. In windows 7 I used to get BSODs about once a week. The really weird thing is that it was related to whenever I rebooted my...

Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 22:30.
Find Us