BSOD For unspecified 124 STOP

Page 4 of 5 FirstFirst ... 2345 LastLast

  1. Posts : 14,894
    Windows 10 Pro

    50c for a hard drive is very hot, my hard drives temperatures don't come near 40c usually.

    What this means is that the system shut down because the hard drive likely couldn't funtion properly under that much heat, depending on how long the hard drives have stayed at 50c they may have gotten damage.

    Before we continue I would want to ask if you have a backup of your data.
      My Computers

  2. Posts : 24
    Windows 10
    Thread Starter

    I have no backups of either drive, nor the hardware to do so. However, C: contains no data that can't be easily retrieved, and D: appears to be fine (chkdsk is working for it but is not yet complete).

    The temps of 50c may have been an anomaly. Despite me recreating the conditions I last saw them at 50c under, they will not rise above 40c, and idle at ~36. Maybe it was my mind playing tricks, or a fluke, but it's not something I can reproduce.

    I want to bring a couple other things up in case theyare useful. I have yet to see a BSOD for the ntoskrnl crashes due to a screen of vertical lines of two alternating shades of the same color being shown until restart. It looks much like this

    But will be dinfferent colors depending on what was on screen right before the crash.

    Looking at that forum post (which I just found) I'm starting to really think it's all the card's doing.

    That brings me to another point. Various programs (namely lately) have caused my graphics drivers to suddenly crash and cause GUIs to break until restarted. Plus, the last two crashes happened when recording Overwatch, specifically a few seconds after the video was saved.

    Keep in mind these same crashes happened before my new build, and the only constants are the HDD, CPU, and GPU. However, the HDD from before is now the storage drive and the boot drive is a referb.

    Ofc none of this explains the boot drive failure I had earlier, but I wanted to get all of that out there so I don't waste time. I just really -really- don't want to have to buy a whole new card...

    Sorry for the rambling. It's 8am. I'm goimg to bed.
      My Computer

  3. Posts : 14,894
    Windows 10 Pro

    The link you posted shows a 404 access denied for me.

    Not sure if I mentioned this, but when you see ntoskrnl.exe as probable cause, or similar Windows files, you can assure it is because there is nothing else to directly blamed. This happens when in the stack no 3rd party driver is present for blaming.
    With other words, it is not the cause but the default referring to when there is nothing else as something must be blamed.
      My Computers

  4. Posts : 24
    Windows 10
    Thread Starter

    Fixed the link. Sorry. Cant get it to work on phone, so it's just the img.
      My Computer

  5. Posts : 24
    Windows 10
    Thread Starter

    Attachment 91301
    chkdsk for storage drive
      My Computer

  6. Posts : 14,894
    Windows 10 Pro

    That looks fairly fine :)

    Could you upload the chkdsk log please, a .txt or .evtx file is preferrable, if .evtx you might need to zip it up and upload the zip.
    Chkdsk Log in Event Viewer - Read in Windows 10 - Windows 10 Forums
    There are likely things that have been changed, deleted or added what I would like to be aware of :)
      My Computers

  7. Posts : 24
    Windows 10
    Thread Starter

    Ok this is what I was able to find in the logs.
      My Computer

  8. Posts : 14,894
    Windows 10 Pro

    Looks fine :)

    About your card, is a 42% of the fans the max you can push from it?
    83C with 42% of the fans under load (from your furmark screenshot), if this isn't the max it should be possible to get the temp down when under heavy load.
      My Computers

  9. Posts : 24
    Windows 10
    Thread Starter

    Yea, the fans can go higher, but they are either automatic or static. Someone mentioned adjusting the cooling 'curve' but I have no idea where to adjust that. Radeon settings seems to not have that option.
      My Computer

  10. Posts : 14,894
    Windows 10 Pro

    Best place I know to adjust it is in the BIOS

    Please fill in your system specs
    Please follow this tutorial and download the tool. The tool will give you detailed information about your system specs, please fill in your system specs more completely including PSU, cooling and other used stuff like mouse, keyboard, monitor, case, etc.
    The PSU, cooling and other stuff are NOT mentioned in the tool.
    How to fill in your system specs:

      My Computers


  Related Discussions
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 17:20.
Find Us

Windows 10 Forums