1.    31 Jan 2016 #1
    Join Date : Jan 2016
    Posts : 7
    Windows 10

    USB Causing IRQL_ ...


    Hi,

    I use my webcam sparingly and do not leave it plugged in on a regular basis. When plugging or unplugging, I am mindful of not having the the webpage or program open when detaching from the USB slot.

    I've enclose my dump file, the problem only occurs when the webcam is connected or unconnected.

    Thank you for your valuable assistance

    terrace29

    Attachment 61828
      My ComputerSystem Spec
  2.    02 Feb 2016 #2
    Join Date : Jun 2015
    Posts : 12,952
    Windows 10 Pro

    Hi Terrace29,

    The reason why your system crashes when you use your webcam is because the drivers of the webcam are 10 years old.
    Check Creative for updates.
    Driver Reference Table - V0060Vid.sys
    Code:
    *** WARNING: Unable to verify timestamp for V0060Vid.sys
    *** ERROR: Module load completed but symbols could not be loaded for V0060Vid.sys
    
    
    1: kd> lmvm V0060Vidstart             end                 module name
    fffff801`3fb60000 fffff801`3fb83980   V0060Vid T (no symbols)           
        Loaded symbol image file: V0060Vid.sys
        Image path: \SystemRoot\system32\DRIVERS\V0060Vid.sys
        Image name: V0060Vid.sys
        Timestamp:        Fri Aug 25 09:51:55 2006 (44EEAC1B)
        CheckSum:         00030FE5
        ImageSize:        00023980
        Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
      My ComputersSystem Spec
  3.    02 Feb 2016 #3
    Join Date : Jan 2016
    Posts : 7
    Windows 10
    Thread Starter

    Thank you kindly axe0
      My ComputerSystem Spec
  4.    07 Feb 2016 #4
    Join Date : Jan 2016
    Posts : 7
    Windows 10
    Thread Starter

    I updated the driver, at least I installed the latest one available from the reference, however still crashes.

    Hate to ask for a re-look, however I've done new dump file after a recent crash, I would greatly appreciate another look see.

    Clearly getting a new suitable cam is the answer, I'm wondering if there would be any other resort.

    Thank you again for you help.Attachment 62994
      My ComputerSystem Spec
  5.    07 Feb 2016 #5
    Join Date : Jun 2015
    Posts : 12,952
    Windows 10 Pro

    I hope this says enough
    Code:
    *******************************************************************************
    *                                                                             *
    *                        Bugcheck Analysis                                    *
    *                                                                             *
    *******************************************************************************
    
    Use !analyze -v to get detailed debugging information.
    
    BugCheck A, {0, 2, 0, fffff80373cda494}
    
    *** WARNING: Unable to verify timestamp for V0060Vid.sys
    *** ERROR: Module load completed but symbols could not be loaded for V0060Vid.sys
    An invalid memory address was being accessed when the priority (IRQL) was too high, for normal execution it should be 0, higher is meant for either Windows mechanism or hardware
    Code:
    *******************************************************************************
    *                                                                             *
    *                        Bugcheck Analysis                                    *
    *                                                                             *
    *******************************************************************************
    
    IRQL_NOT_LESS_OR_EQUAL (a)
    An attempt was made to access a pageable (or completely invalid) address at an
    interrupt request level (IRQL) that is too high.  This is usually
    caused by drivers using improper addresses.
    If a kernel debugger is available get the stack backtrace.
    Arguments:
    Arg1: 0000000000000000, memory referenced
    Arg2: 0000000000000002, IRQL
    Arg3: 0000000000000000, bitfield :
        bit 0 : value 0 = read operation, 1 = write operation
        bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
    Arg4: fffff80373cda494, address which referenced memory
      My ComputersSystem Spec
  6.    07 Feb 2016 #6
    Join Date : Jan 2016
    Posts : 7
    Windows 10
    Thread Starter

    Thanks again axe0, I understand to a degree, much is beyond my level of expertise. I appreciate your prompt reply and will research this further.
      My ComputerSystem Spec

 


Similar Threads
Thread Forum
Mozilla Firefox causing BSOD
Can anyone help with my problem when I open Firefox I get the BSOD with Kernel security error. Everything else is working fine. Specs MB: Asus Sabertooth 990FX R2.0 Graphics: Asus GTX 680 Memory: Kingston 1600 32GB OS: Windows 10 x64 Pro
BSOD Crashes and Debugging
Need help tracking down what's causing disc usage
Hello. So I've googled and seen this is a pretty common issue (disc thrashing). But I'm not sure how to exactly narrow down the exact process and possibly kill it. My pc doesn't exactly slow down during this, but it looks like it's random and the...
Performance & Maintenance
installation of win 10 causing problems
I have a hp laptop (model 15 n022sa) and ive been trying to upgrade to windows 10 from 8.1 when i get to the first restart it boots back into windows 8.1 and says installation has failed. I tried doing a fresh install from a dvd by changing the...
Installation and Upgrade
Solved All folders are read only, and it's causing problems
Hi! Since I have upgraded to Windows 10 Pro, I noticed that all my folders' attributes are read only . Even if I create new folders, they are read only on creation. When I try to remove the read only attribute in the folder properties, it...
General Support
Mpc-hc causing problems...9879
Seems that mpc-hc causes issues on the task bar, and the start menu. Anyone else..??
Software and Apps
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 04:38.
Find Us
Twitter Facebook Google+ Ten Forums iOS App Ten Forums Android App



Windows 10 Forums