Various BSOD


  1. Posts : 14
    Windows 10 home 64 bit
       #1

    Various BSOD


    I thought my BSOD troubles were behind me. No BSOD for a few weeks and now out of the blue they are starting again.

    The only new piece of hardware I installed was an add on USB expansion like 4 weeks ago and recently I used a multiport 5 in 1 USB reader.

    I'll post the log, I appreciate any help.

    Thanks.
      My Computer


  2. Posts : 1,652
    Windows 10 Pro x64
       #2

    Code:
    *******************************************************************************
    *                                                                             *
    *                        Bugcheck Analysis                                    *
    *                                                                             *
    *******************************************************************************
    
    
    Use !analyze -v to get detailed debugging information.
    
    
    BugCheck 50, {ffffc005bc57c3f0, 0, fffff800b80a10bf, 2}
    
    
    
    
    Could not read faulting driver name
    Probably caused by : luafv.sys ( luafv!LuafvPreWrite+3f )
    
    
    Followup: MachineOwner
    ---------
    Please follow:
    MemTest86+ - Test RAM - Windows 10 Forums
      My Computers


  3. Posts : 14
    Windows 10 home 64 bit
    Thread Starter
       #3

    I ran MemTest86 last night and it found errors on test 9 on the first pass with my memory (8gb x 4) in XMP profile.
    I understand the XMP profile settings are advertised for 1 kit installed, I however have two installed so maybe that is the problem?

    I disabled my XMP profile and ran for another 6 passes without any errors.

    I suppose I'll just leave XMP disabled and come back if it occurs again.
    Eventually I'll get around to testing every stick of ram individually.

    Thanks!

    John
      My Computer


  4. Posts : 14
    Windows 10 home 64 bit
    Thread Starter
       #4

    I thought it was fixed but I got another BSOD while sorting a file collection by date imported in Jriver.

    I am really hoping someone can point me to a hardware vs software problem as this is a fairly new build...
    New file is attached. Thanks.

    I also plan on running another 8 hours of memtest86 tonight.
      My Computer


  5. Posts : 14
    Windows 10 home 64 bit
    Thread Starter
       #5

    I ran memtest86 another 8 hours on default settings (no XMP) with no errors found...makes me think there is some software problem.

    If anyone can help confirm I would be gracious.

    Thanks.
      My Computer


  6. Posts : 654
    windows 10 Pro
       #6

    The latest dumpfile is
    Code:
      *******************************************************************************
    *                                                                             *
    *                        Bugcheck Analysis                                    *
    *                                                                             *
    *******************************************************************************
    Use !analyze -v to get detailed debugging information.
    BugCheck 1A, {41792, fffff680002b7100, 1000000000, 0}
    Probably caused by : memory_corruption ( ONE_BIT )
    Followup: MachineOwner
    ---------
    0: kd> !analyze -v
    *******************************************************************************
    *                                                                             *
    *                        Bugcheck Analysis                                    *
    *                                                                             *
    *******************************************************************************
    MEMORY_MANAGEMENT (1a)
        # Any other values for parameter 1 must be individually examined.
    Arguments:
    Arg1: 0000000000041792, A corrupt PTE has been detected. Parameter 2 contains the address of
     the PTE. Parameters 3/4 contain the low/high parts of the PTE.
    Arg2: fffff680002b7100
    Arg3: 0000001000000000
    Arg4: 0000000000000000
    Run the memtest 86 for at least 8 complete passes.

    Your memory is 2400 mhz but from the dumpfile it runs at 2133 mhz.
    Code:
     [Memory Device (Type 17) - Length 40 - Handle 0043h]
      Physical Memory Array Handle  0042h
      Memory Error Info Handle      [Not Provided]
      Total Width                   64 bits
      Data Width                    64 bits
      Size                          8192MB
      Form Factor                   09h - DIMM
      Device Set                    [None]
      Device Locator                ChannelA-DIMM0
      Bank Locator                  BANK 0
      Memory Type                   1ah - Specification Reserved
      Type Detail                   0080h - Synchronous
      Speed                         2133MHz
      Manufacturer                  0215
      Serial Number                         
      Asset Tag Number                        
      Part Number                   CMK16GX4M2A2400C14
    Check this in your BIOS and also your other specs like CL 14 etc.

    Please update your Easeus TODO backup program it has drivers from 2014
    Also your Open Vpn driver/programs is outdated the drivers are from 2013
      My Computer


  7. Posts : 14
    Windows 10 home 64 bit
    Thread Starter
       #7

    What does a corrupt PTE mean?

    My memory is 2400 mhz with XMP enabled and 2133 if left to auto in BIOS.
    I'll run more memory tests overnight.
    I have run atleast 8 runs of memtest86 with XMP disabled without any errors but my latest BSOD was while running with XMP disabled too.

    Thanks for checking it out.

    John
      My Computer


  8. Posts : 14,897
    Windows 10 Pro
       #8

    A page table is the data structure used by a virtual memory system in a computer operating system to store the mapping* between virtual addresses and physical addresses.
    A corrupted entry of the page table means that a part of the data structure has been corrupted.
    (Not entirely correct)

    *mapping = translation from virtual addresses to physical addresses by the memory management mechanism with assistance from the hardware
      My Computers


  9. Posts : 14
    Windows 10 home 64 bit
    Thread Starter
       #9

    Thanks for the help everyone. I know this is an old thread but I forgot to let everyone know that the problem has been solved.

    IT WAS BAD RAM!!! I RMA'ed it and have not had a BSOD in 9 months!!!

    Bad ram, unfu**in believable. 9 months later and I am still upset about it!!
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 17:51.
Find Us




Windows 10 Forums