BSOD on only cold boots

Page 1 of 2 12 LastLast

  1. Colinator01
    Posts : 7
    Windows 10 x64
       New #1

    BSOD on only cold boots


    I got a custom built pc for christmas and it has been getting BSOD's since it was built and they have only been happening on cold boots, and the file that is having problems is ntoskrnl. I would love if someone could find the problem that has been going on for weeks.
      My Computer
    Quote Quote

  3. axe0
    Posts : 14,903
    Windows 10 Pro
       New #2

    Hi Colinator01,

    Welcome to the 10forums.

    Please uninstall OpenHardwareMonitor, the last update was in december 2013 and it uses a very old driver.

    Please check MSI for driver updates for the sata controller drivers, I believe they are included in the chipset but can't say for sure.
    MSI Global 64

    Please uninstall the AMD software for the time of troubleshooting, the driver below is used with AMD software, is old and is known for causing bluescreens in Windows 7.
    I know that Windows 10 and Windows 7 are 2 different operating systems, but I would like to start with getting rid of the old drivers.
    Code:
    c:\program files\amd\ati.ace\fuel\amd64\aoddriver2.sys
      My Computers
    Quote Quote

  4. Colinator01
    Posts : 7
    Windows 10 x64
    Thread Starter
       New #3

    The latest sata controller driver is windows 8.1 is that ok?

    What do you mean by uninstall amd software? as in the catalyst installer? because when i uninstalled it and tried downloading the sata controller driver it told me that i needed the amd catalyst installer
      My Computer
    Quote Quote

  6. axe0
    Posts : 14,903
    Windows 10 Pro
       New #4

    Best is for Windows 10.

    First uninstall AMD Catalyst, then install the sata controller drivers with a custom/advanced installation to ensure as less as possible software.
      My Computers
    Quote Quote

  7. Colinator01
    Posts : 7
    Windows 10 x64
    Thread Starter
       New #5

    I got it updated
      My Computer
    Quote Quote

  8. axe0
    Posts : 14,903
    Windows 10 Pro
       New #6

    Please keep me posted on any improvements or problems.
      My Computers
    Quote Quote

  9. Colinator01
    Posts : 7
    Windows 10 x64
    Thread Starter
       New #7

    Turned my computer on and its the same old blue screen. When I start it up it usually blue screens 2-3 times then goes into automatic repair and after that its fine.
      My Computer
    Quote Quote

  10. axe0
    Posts : 14,903
    Windows 10 Pro
       New #8

    When does the crash occur?
    What error codes are displayed?
      My Computers
    Quote Quote

  12. Colinator01
    Posts : 7
    Windows 10 x64
    Thread Starter
       New #9

    It only crashes on start up just before it goes to windows and the main 3 error codes I get are system service exception, system thread exception not handled, and kmode exception not handled. There are a bunch of other error codes I have gotten that aren't as consistent.
      My Computer
    Quote Quote

  13. axe0
    Posts : 14,903
    Windows 10 Pro
       New #10

    Could you run the DM Log Collector (from the BSOD Posting Instructions) again and upload a new zip please.

    EDIT: for testing purpose, please disable fast startup if it is enabled
    Fast Startup - Turn On or Off in Windows 10 - Windows 10 Forums
      My Computers
    Quote Quote

 

  Related Discussions
BSOD on cold boot only
in BSOD Crashes and Debugging

Hi all, this is a duplicate of this post that I posted in the wrong section. Just delete that post. Sorry for making a mess, I'm new on this forum. So: my problem is with my custom build PC, and any help would be greatly appreciated. My...
Hi, Here a summary of my problem... I used to run Windows 7 64-bit and decided it was time to upgrade in August 2015. I bought an SSD and an extra 8GB stick of identical RAM at the same time, and then proceeded to do a full clean (from scratch)...
If I am in Windows 10 and choose "Restart" or the OS reboots from a software install/update, I get a BSOD after post. The screen reads: Recovery Your PC/Device needs to be repaired The operating system couldn't be loaded because the kernel is...
BSOD on cold boot.
in BSOD Crashes and Debugging

I have been getting a variety of BSOD's on cold boots. After the first BSOD, everything runs smoothly thereafter; any amount of stress on the PC doesn't cause any BSOD. Things I have tried: Updated bios and all the motherboard related whatnot....
BSOD at every cold boot
in BSOD Crashes and Debugging

Hello everyone, having BSOD at every cold boot. This is happening on my desktop (first build I made), hardware is: MB: Asus Maximus VIII Gene CPU: Intel i5-6600k RAM: 2x 8GB Crucial Ballistix GPU: Nvidia GTX 1070 Founders Edition Windows 10...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

 © Designer Media Ltd
All times are GMT -5. The time now is 15:19.
Find Us




Windows 10 Forums