BSOD while using Sonar Artist. Event Viewer 1001 and 18


  1. Posts : 2
    Windows 10 Pro 64-bit
       #1

    BSOD while using Sonar Artist. Event Viewer 1001 and 18


    I posted this on Sevenforums because i totally forgot I was using 10 but here's kind of a repost haha.

    I was in the middle of using Cakewalk Sonar Artist and the computer randomly BSOD. It a pretty memory and CPU heavy program but I'm curious what happened.


    I've had a few crashes as of lately. One I believe to be a bad GPU but now I saw ID: 18 which says something about my CPU.

    Any help would be great.

    Edit: It's been crashing a lot lately with different kinds of freezing, lock ups, and BSOD. Everytime it was when I used Sonar Artist. I can play new games without issues but once I start using that application it crashes after about 15-20 minutes.

    The uploaded attachment is current to today.
      My Computer


  2. Posts : 14,897
    Windows 10 Pro
       #2

    The errors are 0x124 WHEA_UNCORRECTABLE_ERROR (Windows Hardware Error Architecture)
    This means that there are problems with your hardware, but this error is also caused by overclocking, faulty drivers or BIOS problems.



    STOP 0x124 Troubleshooting

    Read carefully before proceeding.



    warning   Warning
    If you're overclocking your system, revert back to stock clocks now.

    Note   Note
    Test the system once the overclock is removed before continuing with the steps outlined below.


    Part One: CPU Stress Test
    Part Two: MemTest86+ RAM Diagnostic
    Part Three: Hard Drive Diagnostics
    Part Four: GPU Stress Test




    ONE

     CPU TEST


    Run Prime95 and/or IntelBurnTest to stress test your CPU. Prime95 - Stress Test Your CPU - Windows 10 Forums & CPU - Stress Test Using IntelBurnTest - Windows 7 Help Forums

    warning   Warning
    Your CPU temperatures will rise quickly while under this stress test. Keep a keen eye on them and abort the test if overheating occurs.





    TWO

     RAM TEST


    Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 10 Forums

    Note   Note


    MemTest86+ needs to be run for at least 8 passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking forzero errors here. Even a single error will indicate RAM failure.





    THREE

     HDD TEST


    Run SeaTools to check the integrity of your HDD. SeaTools for DOS and Windows - How to Use - Windows 7 Help Forums
    Run following tests
    1. Short Drive Self Test
    2. Short generic
    3. Long generic

    If the short generic fails, no need for the long generic.

    Note   Note
    Do not run SeaTools on an SSD as the results will be invalid.


    Run chkdsk
    Disk Check - Windows 7 Help Forums

    Run HDTune to
    • scan for errors, no quick scan but full scan
    • check the health,
    • benchmark.

    It may take some time, but please take the time you need to perform it properly.
    Let me know what the results are
    • of the error scan,
    • make a screenshot of the health of every hard drive and post the screenshots,
    • post screenshots with the benchmark of the
      • transfer rate,
      • access time,
      • burst rate,
      • cpu usage.





    FOUR

     GPU TEST


    Run Furmark to stress test your GPU. FurMark - GPU Stress Test - Windows 10 Forums

    Note   Note
    Run Furmark for around 30 minutes.

    warning   Warning
    Your GPU temperatures will rise quickly while Furmark is running. Keep a keen eye on them and abort the test if overheating occurs.
      My Computers


  3. Posts : 2
    Windows 10 Pro 64-bit
    Thread Starter
       #3

    I only tested the CPU so far but in 15 minutes I got 1 error and just 7 minutes later I got another. CPU is only running at 64 Celsius so It's not over heating and I just got another PSU so I don't think its my powersupply. I'm going to give memtest a run in a little bit for the heck of it. Looks like I might need a new CPU.
    Attachment 61295
      My Computer


  4. Posts : 14,897
    Windows 10 Pro
       #4

    My suggestion is to replace (RMA if you have warranty) the CPU before you run the other tests.
    The CPU might cause some tests to either crash or give unexpected results.
      My Computers


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 12:23.
Find Us




Windows 10 Forums