BSOD - IRQ Not Less than or Equal and Driver Power State Failure

I continue to have issues with the subject BSODs. I have attempted to follow on line help (e.g., deleting devices that have issues), but continue to get them. I am not sure how to read this mini dump file and am asking for your help.

Thanks.

Marc

BSOD Posting Instructions

   Warning

Programs that claim to update your drivers install either the wrong or corrupted drivers.
If you have installed any driver with Driver Booster 3, please remove them as it may cause trouble.

For laptops, install the drivers the manufacturer provides.

Please remove Avanced SystemCare, IObit software isn't quite as proper as most might think.

The Intel Rapid Storage Technology drivers have been flagged, but I don't see driver updates for your laptop.
This means that Lenovo doesn't offer support for your laptop running Windows 10

Code:

*** WARNING: Unable to verify timestamp for iaStorA.sys
*** ERROR: Module load completed but symbols could not be loaded for iaStorA.sys

3: kd> lmvm iastora
start             end                 module name
fffff801`80360000 fffff801`8061a000   iaStorA    (deferred)             
    Image path: \SystemRoot\System32\drivers\iaStorA.sys
    Image name: iaStorA.sys
    Timestamp:        Fri Aug 02 03:39:52 2013 (51FB0DE8)
    CheckSum:         000AC609
    ImageSize:        002BA000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4

Usually one can safely remove Intel Rapid Storage Technology.

It is possible that the black screen problem and login freeze is caused by your hard drive, 5.400 RPM with a SATA-300 connection.
Please follow below instructions for the hard drive.

Diagnostics Test

 HDD TEST

Run SeaTools to check the integrity of your HDD. SeaTools for DOS and Windows - How to Use - Windows 7 Help Forums
Run following tests

1. Short Drive Self Test
2. Short generic
3. Long generic

If the short generic fails, no need for the long generic.

   Note

Do not run SeaTools on an SSD as the results will be invalid.

Run chkdsk
Disk Check - Windows 7 Help Forums

Run HDTune to

• scan for errors, no quick scan but full scan
• check the health,
• benchmark.

It may take some time, but please take the time you need to perform it properly.
Let me know what the results are

• of the error scan,
• make a screenshot of the health of every hard drive and post the screenshots,
• post screenshots with the benchmark of the
  
  • transfer rate,
  • access time,
  • burst rate,
  • cpu usage.

Please fill in your system specs

Please follow this tutorial and download the tool. The tool will give you detailed information about your system specs, please fill in your system specs more completely.

How to fill in your system specs:

Your hard drive is at his end, you need to replace it a.s.a.p.

Here is a benchmark of my hard drive (same hard drive type), it is slowly also getting at its end but will do for some time.
Attachment 61867