Kernell Power Even ID 41 Category 63

axe0 · 22 Jan 2016

Simple suggestion as it is late for me (or early), play a little with the settings you reverted back to remove the OC and see what comes stable.

Buzzik · 27 Jan 2016

crushed again waking up from sleep mode on stock clocks

axe0 · 27 Jan 2016

I can't help with that info..
For proper help you need to upload a new zip from the dm log collector.

Buzzik · 27 Jan 2016

axe0 said:

I can't help with that info..
For proper help you need to upload a new zip from the dm log collector.

here

axe0 · 28 Jan 2016

Please update/reinstall your ASUS Xonar audio drivers.
Driver Reference Table - cmudaxp.sys

Code:

*** WARNING: Unable to verify timestamp for cmudaxp.sys
*** ERROR: Module load completed but symbols could not be loaded for cmudaxp.sys

10: kd> lmvm cmudaxpstart             end                 module name
fffff801`08400000 fffff801`0872e000   cmudaxp    (deferred)             
    Image path: \SystemRoot\system32\drivers\cmudaxp.sys
    Image name: cmudaxp.sys
    Timestamp:        Tue Jun 02 11:11:20 2015 (556D7338)
    CheckSum:         002A7517
    ImageSize:        0032E000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4

Buzzik · 31 Jan 2016

axe0 said:

Please update/reinstall your ASUS Xonar audio drivers.
Driver Reference Table - cmudaxp.sys

Code:

*** WARNING: Unable to verify timestamp for cmudaxp.sys
*** ERROR: Module load completed but symbols could not be loaded for cmudaxp.sys

10: kd> lmvm cmudaxpstart             end                 module name
fffff801`08400000 fffff801`0872e000   cmudaxp    (deferred)             
    Image path: \SystemRoot\system32\drivers\cmudaxp.sys
    Image name: cmudaxp.sys
    Timestamp:        Tue Jun 02 11:11:20 2015 (556D7338)
    CheckSum:         002A7517
    ImageSize:        0032E000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4

Okay I reinstalled the same newest driver available on ASUS web site and put my base clock back to 200(4Ghz). Will report back soon...

Buzzik · 03 Feb 2016

Reinstalling drivers did not help...

axe0 · 03 Feb 2016

Please uninstall Kaspersky while troubleshooting and use Windows Defender as alternative.
Service articles

Diagnostic Test

CPU TEST

Run Prime95 and IntelBurnTest to stress test your CPU. Prime95 - Stress Test Your CPU - Windows 10 Forums CPU - Stress Test Using IntelBurnTest - Windows 7 Help Forums

Note

If you're overclocking anything, please stop it and set everything back to default while troubleshooting

Warning

Your CPU temperatures will rise quickly while under this stress test. Keep a keen eye on them and abort the test if overheating occurs.

Buzzik · 04 Feb 2016

It might be a dumb question. My Intel SATA controller is 3gb/s and HWiNFO shows for one drive Serial ATA 3Gb/s @ 3Gb/s and Serial ATA 6Gb/s @ 3Gb/s for the other while both of them are capable of 6gb/s. Why does my Intel shows as 3gb/s @ 3gb/s instead of 6 @ 3
Attachment 62485

Uninstalled Kaspersky, currently running prime95 Small FFTs on default CPU clock. max temp after 20min is 49C

axe0 · 05 Feb 2016

There are no such things as dumb questions, only dumb answers which I try to avoid :)

Your motherboard has 8 sata 3Gb/s connectors (SATA2_0, SATA2_1, SATA2_2, SATA2_3, SATA2_4, SATA2_5) and 2 sata 6Gb/s connectors (GSATA3_6, GSATA3_7).
The 6Gb/s connectors are under the marvell 9128 chip

The question is which connector is used for the Intel drive?