Windows 10: Critical_process_died

Page 1 of 3 123 LastLast
  1.    19 Jan 2016 #1

    Critical_process_died


    Ok so this bsod started happening a few days ago after an automatic (midnight) update. When the pc tries to boot i get the CRITICAL_PROCESS_DIED error and automatic recovery doesn't work.

    I have tried booting in safe mode (results are the same as normal boot), startup recovery (doesn't work).
    I tried reinstalling and recovering windows, both with no success.

    chkdsk found problems with the filesystem, but running with /f says: "Windows cannot run disk checking on this volume because it is write protected".

    diskpart fails to clear readonly attributes on disk 0 (but when i list the attributes everything is NO, so I'm guessing it isn't in readonly)

    I have cleared readonly attributes on all volumes and nothing has changed.
      My ComputerSystem Spec


  2. Posts : 11,489
    Windows 10 Pro
       20 Jan 2016 #2




    Critical_process_died Diagnostics Test Critical_process_died
     HDD TEST

    Run SeaTools DOS to check the integrity of your HDD. SeaTools for DOS and Windows - How to Use - Windows 7 Help Forums
    Note   Note
    Do not run SeaTools on an SSD as the results will be invalid.
      My ComputersSystem Spec

  3.    21 Jan 2016 #3

    axe0 said: View Post


    Critical_process_died Diagnostics Test Critical_process_died
     HDD TEST

    Run SeaTools DOS to check the integrity of your HDD. SeaTools for DOS and Windows - How to Use - Windows 7 Help Forums
    Note   Note
    Do not run SeaTools on an SSD as the results will be invalid.
    The (long) test passed without error.
      My ComputerSystem Spec


  4. Posts : 11,489
    Windows 10 Pro
       21 Jan 2016 #4

    What options do you have in the BIOS?




    Critical_process_died Diagnostic Test Critical_process_died
     RAM TEST

    Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 10 Forums

    Note   Note


    MemTest86+ needs to be run for at least 8 passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.
      My ComputersSystem Spec

  5.    22 Jan 2016 #5

    So how specific do you want this to be? Do you want images?
      My ComputerSystem Spec

  6.    22 Jan 2016 #6

    First off, because this probably has something to do with the hard drive, I am using a intel fast response ssd in combination with my hard drive.

    Pre-BIOS:
    system info, system diagnostics, hp sparekey, boot device options, bios setup, hp recovery, network boot



    Under bios setup there are 3 tabs: File, security and system configuration.
    These are the options at system config.

    1. Device configurations

    • Usb legacy support
    • parallel port mode (ecp, standard, bidirectional, epp)
    • fan always on while on AC power
    • data executon prevention
    • max sata speed (3 or 6)
    • sata device mode( ide, ahci, raid)
    • ctrl i prompt
    • usb charging port
    • wake on usb
    • secondary battery fast charge
    • vtx
    • numlock on at boot
    • express card link speed (gen 1, gen 2)
    • smart card reader power setting( always on, if card is present)
    • deep sleep( off, on, auto)


    2. boot options

    • audio alerts during boot
    • custom logo
    • display diagnostic url
    • custom help and url messgage
    • require acknowledgment of battery errors
    • fast boot
    • cd-rom boot
    • sd boot
    • floppy boot
    • pxe internal nic boot
    • pxe internal ipv4 boot
    • pxe internal ipv6 boot
    • usb boot
    • upgrade bay hard drive boot
    • esata boot
    • hp application
    • customized boot
    • (unselecatable) secureboot config
    • boot mode(legacy, uefi hybrid, uefi native)



    3. built-in device options
    buttons, wifi, bluetooth, keyboard, backlight...


    4. port options
    enable/disable external ports.



    5. set security level
    Theres a ton of stuff in here examples:

    • Lan controller (change, view, hide)
    • hyperthreading (change, view, hide)
    • sata device mode (change, view, hide)


    6. restore defaults

    7. bios power on
    days of the week
      My ComputerSystem Spec


  7. Posts : 11,489
    Windows 10 Pro
       22 Jan 2016 #7

    Please make sure your BIOS is loaded for optimal default settings.

    What does the bolt text mean?
      My ComputersSystem Spec

  8.    22 Jan 2016 #8

    axe0 said: View Post
    What does the bolt text mean?
    Those are the selected values.
      My ComputerSystem Spec


  9. Posts : 11,489
    Windows 10 Pro
       22 Jan 2016 #9

    I suspected that, but it doesn't 100% completely make sence to me (doesn't matter actually)
      My ComputersSystem Spec

  10.    23 Jan 2016 #10

    axe0 said: View Post
    Run MemTest86+ to analyse your RAM.
    8 tests passed without error.
      My ComputerSystem Spec


 
Page 1 of 3 123 LastLast

Related Threads
Critical_process_died at startup in BSOD Crashes and Debugging
Several times since Windows 10 has been updated (see attached file) I have received a "Critical_process_died" notification. Sometimes at startup & at least one time during normal browsing. Have talked with a local computer shop about various...
BSOD Critical_Process_Died in BSOD Crashes and Debugging
Hello, I have various BSOD Crashes. They occur during normal Browsing. Firstly it was a "Unexpected Store Exception" in the help in another Forum at that time ( 2 weeks ago ) we managed to do a perfect SFC-Scan and a perfect DISM-Scan,...
Solved BSOD Critical_Process_Died in BSOD Crashes and Debugging
The OS (win10Pro) is an upgrade from Win7Ultimate and this BSOD issue only started happening this morning. Unfortunately, my last image is from Friday so I'm not sure that will be of any help either. The diagnostic file is attached. One thing that...
Solved Bsod: Critical_process_died in BSOD Crashes and Debugging
After upgrading to win 10 from win 7 I started to get BSOD CRITICAL_PROCESS_DIED. It always happens after I leave the computer for a while. I tried to read the logs, but I couldn't find anything that could mess things up. Also tried to uninstall...
Solved Critical_process_died in BSOD Crashes and Debugging
Please Help... memory.dmp 400mb = Probably Caused by ntkrnlmp.exe Absolutely random cause. need to post my dmp?
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 09:55.
Find Us