New
#11
8 tests or 8 passes?
There is quite some difference between passes and tests with MemTest86+
There are 10 tests in each pass and it needs to be run for at least 8 complete passes or until errors.
Critical_process_died
-
-
-
-
New #14
system bios version: 681AV Version F.40
It dates from 31/01/'13
-
New #15
Are above settings of the BIOS the default settings?
Unfortunately I can't find BIOS updates, I can't even find anything of the BIOS on the update support page of your laptop.
This indicates a hardware problem, but it could also be caused by wrong settings in the BIOS.
Please try some hardware diagnostics tests you can do from Hardware Diagnostics
I have tried booting in safe mode (results are the same as normal boot), startup recovery (doesn't work).
I tried reinstalling and recovering windows, both with no success.
-
New #16
Those are the default settings, except for vtx (which is disabled by default). I tried defaulting the bios, but it doesn't change anything. in-bios diagnostics doesn't find any problems either.
-
New #17
Please run chkdsk again using following command
/r = Locates bad sectors and recovers readable information. The disk must be locked. /r includes the functionality of /f, with the additional analysis of physical disk errors.Code:chkdsk C: /r /x
/x = Forces the volume to dismount first, if necessary. All open handles to the drive are invalidated. /x also includes the functionality of /f.
-
-
-
New #19
Do you know what programs are installed?
Do you have Windows Pre Environment bootable media?
Windows 10 Recovery Tools - Bootable Rescue Disk - Windows 10 Forums
-
New #20
l made a mistake here, the version seems to be 68IAV version F.40, mistook the I for a 1.
I know what software was on the pc, and how to get it back. I wouldn't want to do a full wipe and clean install though since I don't have a key of my windows licence.
I have a win10 bootable usb drive, don't know if that is the same?
Quote
Related Discussions
