1.    17 Jan 2016 #1
    Join Date : Jan 2016
    Posts : 4
    Microsoft Windows 10 Enterprise N 2015 LTSB 64-bit

    IRQL not less or equal after closing browser, media player,etc


    I get BSOD and restart with error IRQL not less or equal after closing browser, media player.
      My ComputerSystem Spec
  2.    17 Jan 2016 #2
    Join Date : Jun 2015
    Posts : 12,952
    Windows 10 Pro

    2 attempts of moving memory to virtual memory has caused the crash.
    This is because the permission to move the memory was too high.
    We need driver verifier to catch the driver causing this.




    IRQL not less or equal after closing browser, media player,etc Diagnostic Test IRQL not less or equal after closing browser, media player,etc
     DRIVER VERIFIER

    warning   Warning
    Please make a backup of your important files and get your rescue media or create one.
    Please create a restore point.

    Please follow this tutorial to run driver verifier.

    Driver verifier stresses your drivers and will crash your pc if any driver fails due to a violation.

    Driver verifier should be performed for a max of 48 hours, or when you have a bluescreen, whatever comes first.

    If driver verifier has found a violation and you can't get back into windows normally, try to boot into safe mode and reset in safe mode driver verifier, or in the troubleshooting options open command prompt and type verifier /reset.

    Note   Note
    Your system will act very sluggishly while driver verifier is enabled, this is normal as your drivers will be being subjected to heavy testing in order to make them crash.

    Code:
    *******************************************************************************
    *                                                                             *
    *                        Bugcheck Analysis                                    *
    *                                                                             *
    *******************************************************************************
    
    
    IRQL_NOT_LESS_OR_EQUAL (a)
    An attempt was made to access a pageable (or completely invalid) address at an
    interrupt request level (IRQL) that is too high.  This is usually
    caused by drivers using improper addresses.
    If a kernel debugger is available get the stack backtrace.
    Arguments:
    Arg1: 0000000000000020, memory referenced
    Arg2: 0000000000000002, IRQL
    Arg3: 0000000000000000, bitfield :
    	bit 0 : value 0 = read operation, 1 = write operation
    	bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
    Arg4: fffff801961dd444, address which referenced memory
    
    
    1: kd> k
    Child-SP          RetAddr           Call Site
    ffffd000`223864b8 fffff801`961caea9 nt!KeBugCheckEx
    ffffd000`223864c0 fffff801`961c96c8 nt!KiBugCheckDispatch+0x69
    ffffd000`22386600 fffff801`961dd444 nt!KiPageFault+0x248
    ffffd000`22386790 fffff801`9608babf nt! ?? ::FNODOBFM::`string'+0xe344
    ffffd000`22386860 fffff801`96096c5e nt!MiResolveTransitionFault+0x5bf
    ffffd000`22386900 fffff801`96094153 nt!MiResolveProtoPteFault+0x49e
    ffffd000`223869a0 fffff801`960918d6 nt!MiDispatchFault+0x3b3
    ffffd000`22386af0 fffff801`961c95bd nt!MmAccessFault+0x336
    ffffd000`22386c40 00007ffa`bcabbb80 nt!KiPageFault+0x13d
    0000008e`d06feaf8 00000000`00000000 0x00007ffa`bcabbb80
    Please fill in your system specs
    Please follow this tutorial and download the tool. The tool will give you detailed information about your system specs, please fill in your system specs more completely.
    How to fill in your system specs:

      My ComputersSystem Spec
  3.    18 Jan 2016 #3
    Join Date : Jan 2016
    Posts : 4
    Microsoft Windows 10 Enterprise N 2015 LTSB 64-bit
    Thread Starter

    Hey Axe

    Eset and Nvidia drivers enters to all Non-Microsoft drivers?

    BTW: I selected them.
      My ComputerSystem Spec
  4.    18 Jan 2016 #4
    Join Date : Jan 2016
    Posts : 4
    Microsoft Windows 10 Enterprise N 2015 LTSB 64-bit
    Thread Starter

    So i started driver verifier today at 7:30 am and now at 13:24 got an bsod with same error while playing a movie and malwarebytes was scanning.

    In tutorial says to disable driver verifier after i get a bsod error but if i choose system restore option how you will be able to tell what was the cause because in tutorial dosent says nothing about creating a back-up dump file.
      My ComputerSystem Spec
  5.    18 Jan 2016 #5
    Join Date : Jun 2015
    Posts : 12,952
    Windows 10 Pro

    The tutorial only explains how to run driver verifier, I have added the rest for pre-caution in case things go wrong.

    Same error, but Malwarebytes Chameleon has been flagged.
    Please try to reinstall Malwarebytes
    Uninstall: https://support.malwarebytes.org/cus...5311?b_id=6438
    Download: Malwarebytes | Free Anti-Malware & Internet Security Software
    Code:
    ffffd000`65707518  fffff800`7ed37501Unable to load image \??\C:\Windows\system32\drivers\mbamchameleon.sys, Win32 error 0n2
    *** WARNING: Unable to verify timestamp for mbamchameleon.sys
    *** ERROR: Module load completed but symbols could not be loaded for mbamchameleon.sys
     mbamchameleon+0x7501
    0: kd> lmvm mbamchameleon
    start             end                 module name
    fffff800`7ed30000 fffff800`7ed4e000   mbamchameleon T (no symbols)           
        Loaded symbol image file: mbamchameleon.sys
        Image path: \??\C:\Windows\system32\drivers\mbamchameleon.sys
        Image name: mbamchameleon.sys
        Timestamp:        Tue Aug 04 20:26:11 2015 (55C103C3)
        CheckSum:         00021BE3
        ImageSize:        0001E000
        Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
    You might also want to check the support page of ASUS for driver updates for the network.
      My ComputersSystem Spec
  6.    20 Jan 2016 #6
    Join Date : Jan 2016
    Posts : 4
    Microsoft Windows 10 Enterprise N 2015 LTSB 64-bit
    Thread Starter

    Uninstalled, updated, no problem so far. I will mark as solved.

    Thanks for the support.
      My ComputerSystem Spec

 


Similar Threads
Thread Forum
BSOD irql not less or equal
Upgraded CPU and started getting IRQL Not Less or Equal BSOD. Everything was working fine before the upgrade. Might be a hardware issue, but just want to get confirmation. Upgraded from Intel E6500 to Intel Q9400 on a Asus P5Q Pro Turbo MB. ...
BSOD Crashes and Debugging
irql not less or equal BSOD
I've been having this problem for a while now, random BSODs giving the IRQL not less or equal message. It happens at random times, and doesn't seem to be tied to any particular action.
BSOD Crashes and Debugging
IRQL Not Less or Equal
I've been having problems with a BSOD, but I can't get the debugger in Visual Studio to read the Minidump .dmp file to find out what the problem is. I've updated my BIOS to the newest version. It reboots itself numerous times per day, sometimes...
BSOD Crashes and Debugging
BSOD irql not less or equal
Upgraded Win 7 Pro Dell laptop to Win 10 Pro. Screen resolution changed on first win 10 boot and other resolutions greyed out. Windows update says unable to update Intel HD graphics drivers. Downloaded win 10 drivers from Intel site and...
BSOD Crashes and Debugging
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 13:14.
Find Us
Twitter Facebook Google+ Ten Forums iOS App Ten Forums Android App



Windows 10 Forums