Windows 10: Multiple BSODs After Windows 10 Clean Install

  1.    11 Jan 2016 #1

    Multiple BSODs After Windows 10 Clean Install


    I recently upgraded from Windows 8.1 to Windows 10 via a clean install.

    Ever since I have been getting multiple BSODs for what appears to be all different reasons. My system worked fine before this. The BSODs seem to be random. I have tried updating drivers and such to no effect. I ran Prime95 for 12 hours straight with no problems.

    I'm at a loss here. Any help is greatly appreciated. I read the BSOD posting guidelines. Pretty sure I am posting this correctly. If not Im sorry.


    Attachment 58425
    Last edited by LACSTS; 11 Jan 2016 at 23:57.
      My ComputerSystem Spec

  2.    11 Jan 2016 #2

    I just took a band new Intel 530 240GB SSD and did a clean install of Windows 10. I didnt install any programs or anything. Just installed Windows 10 and activated it.

    As soon as I got to the desktop I went to the updates and got a BSOD. I restarted and then managed to get into the updates and checked for and installed the 2 or 3 updates that there were.

    With no programs installed or anything I have had 3 BSODs in about 15 mins with the computer just sitting there.

    Attached is the BSOD info from the clean install on the new SSD.


    Attachment 58435
      My ComputerSystem Spec


  3. Posts : 11,537
    Windows 10 Pro
       13 Jan 2016 #3

    Please uninstall ESET and let me know if it improves anything
    How do I manually uninstall my Windows ESET product?ESET Knowledgebase

    Code:
    ffffd000`214f2338  ffffe001`02a6220a em006_64+0xa20a
      My ComputersSystem Spec

  4.    13 Jan 2016 #4

    I will do that now. But if that does fix the BSOD problem does that mean I cannot use ESET on this system? Or is there a specific part of ESET that is causing the BSODs?


    Thank you for your help
      My ComputerSystem Spec

  5.    14 Jan 2016 #5

    I uninstalled ESET using the directions in the link that you posted for me. Still getting multiple BSODs.





    Attachment 58733
      My ComputerSystem Spec


  6. Posts : 11,537
    Windows 10 Pro
       14 Jan 2016 #6

    warning   Warning
    Programs that claim to update your drivers install either the wrong or corrupted drivers.
    If you have installed any driver with Driver Booster 3, please remove them as it may cause trouble.





    Multiple BSODs After Windows 10 Clean Install Diagnostics Test Multiple BSODs After Windows 10 Clean Install
     System File Check

    Please try following:
    • Open an admin command prompt
    • Copy/paste "sfc/scannow" (without quotes) and press enter
    • When it finished reboot your system
    • Open again an admin command prompt
    • Enter sfc/scannow again

    If sfc/scannow does NOT say "Windows Resource Protection did not find any integrity violation" after the second SFC, please upload the cbs.log file located at {windows partition}\Windows\Logs\CBS\, if the file is too large try a 3rd party uploader like dropbox, onedrive, google drive, mediafire etc.
    System File Check(SFC a.k.a. Windows Resource Protection) needs to have your system rebooted in order for sfc to try to fix the problems that it finds.




    Multiple BSODs After Windows 10 Clean Install Diagnostic Test Multiple BSODs After Windows 10 Clean Install
     RAM TEST

    Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 10 Forums

    Note   Note


    MemTest86+ needs to be run for at least 8 passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.
      My ComputersSystem Spec

  7.    14 Jan 2016 #7

    I have an update.

    Responding to your last post, I installed the driver booster just to check if it found any drivers that were out of date. I have since uninstalled it.

    After that I did the following.

    I ran sfc/scannow and it completed successfully with the "Windows Resource Protection did not find any integrity violation" message.

    So I ran MemTest86+.

    Attachment 58878

    Then I ran it a few times while removing DIMMs and switching them around to verify what stick it was and whether or not it was one of the motherboard DIMM slots. It ended up being a stick of RAM. I had a brand new set of DDR3 laying around. 4 X 2GB. So after verifying that it was the RAM and not the motherboard I installed the new RAM and am currently running MemTest86+ on the new RAM. I am on pass 3 with 0 errors so far. So I for sure had bad RAM. Hopoefully that is the only problem that was causing all these BSODs.

    I will report back once I get 8 or more passes with the new RAM on MemTest86+.



    Thank you so much for your help. I appreciate it.
      My ComputerSystem Spec


  8. Posts : 11,537
    Windows 10 Pro
       15 Jan 2016 #8

    Let me know how it goes
      My ComputersSystem Spec


 

Related Threads
Hello, I need help ! Trying to figure out whats wrong with my skylake build. First had an MSI M5 board in it but after a stream of BSODs I replaced it with an Asus Pro Gaming board and made a clean install. Everything was fine again. Now 2...
I have a Dell Inspiron 17 5748 laptop, and just installed a new SSD disk. The old HDD is now running in place of ODD. Since then I get frequent BSODs. I don't think it has something to do with SSD, but who knows. Already tried: CHKDSK on both...
Bsod Windows 10 Multiple Bsods Please Help in BSOD Crashes and Debugging
so in the log file there was also another bsod that was diffrent from these but i had to roolback windows so its gone but its was -page fault in nonpaged area i think the error code ended with 05 or something like that but i think its a ram problem...
Solved Multiple BSODs in Windows 10 in BSOD Crashes and Debugging
Hi All, I just registered in hope you can help me with my problem. Yesterday I upgraded from Windows 7 to Windows 10. In windows 7 I used to get BSODs about once a week. The really weird thing is that it was related to whenever I rebooted my...
Hi Forum Hope it is OK to start a new thread - did look through and don't think the others are an exact match. My laptop is running well on W10 with NVIDIA GTX 680M but my desktop, with a GTX 480, is really struggling. I note there are lots of...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 11:42.
Find Us