Irql not less or equal BSOD windows 10

Page 1 of 11 123 ... LastLast

  1. Posts : 61
    windows 10
       #1

    Irql not less or equal BSOD windows 10


    I have had this BSOD error appear twice now. once bfore reinstallation of windows 10 and one after.

    I found some post around the web saying that it was an issue to do with a network driver, so i belive i fixed that.

    I have also completed one full 15 pass test on highest settings with Errors returned. i shall post the results of the test but i did disregard this after i did the test again after my brother changed some windows settings and we redid the test with only 2 passes but no errors.

    the dm log collector is attached with the memtest resulsts aswell.

    What can i do next? Attachment 58341Attachment 58342
      My Computer


  2. Posts : 14,894
    Windows 10 Pro
       #2

    Run the memory test again on each stick in each used slot till 15 passes and find out what stick/slot is giving errors.
      My Computers


  3. Posts : 654
    windows 10 Pro
       #3

    The latest dumpfile is;
    *** WARNING: Unable to verify timestamp for e1r65x64.sys
    *** ERROR: Module load completed but symbols could not be loaded for e1r65x64.sys
    Probably caused by : e1r65x64.sys ( e1r65x64+e066 )
    I think this is the driver for your Intel(R) Ethernet Connection (2) I218-V or the Intel(R) I211 Gigabit Network Connection.The driver is not yet present in the DRT-table.
    Timestamp: Tue Apr 21 10:01:15 2015 (553603CB)
    Update to the latest Intel Lan Driver V20.1.2019.0 for Win 10 (WHQL) 2015/08/06 from your support page https://www.asus.com/us/Motherboards...Desk_Download/

    2 dumpfiles mentioned CPUZ please update to the latest windows 10 version or uninstall.
    One dumpfile was related to a graphical bsod in the proces was mentioned Handbrake.exe. Probably this program is not windows 10 compatible please uninstall.

    You are using Logitech devices with drivers from 2012 please update to the latest windows 10 versions.

    Also found drivers from 2010 ASUS hardware monitoring software related. Look if there are windows 10 compatible version else uninstall.
      My Computer


  4. Posts : 61
    windows 10
    Thread Starter
       #4

    The ethernet is now up to date.

    Handbrake has been uninstalled.

    Logitech webcam has ben updated (I believe that is the only device i have by them)

    In regards to the ASUS software the only thing i can find is an app called "ASUS welcome".

    I am unsure about what you mean in terms of CPUZ? do you want me to update my bios?

    I also called reccomended to uninstall my graphics acrd drivers and then reinstall them in safe mode, is this advised?

    And finally, the other stick of RAM i would like to test but it is under the giant heat sync and i dont have the capability to remove that to get at it, so is there any other way i can test that other stick of ram individually?
      My Computer


  5. Posts : 654
    windows 10 Pro
       #5

    I am unsure about what you mean in terms of CPUZ? do you want me to update my bios?
    No it is a monitoring program CPUID CPU-Z.
    None of the BSOD mentioned specifically your drivers for your Graphic Card, so i would not do that at the moment.

    Could you test with only the under the heatsink installed memory module.
      My Computer


  6. Posts : 14,894
    Windows 10 Pro
       #6

    lifetec said:
    No it is a monitoring program CPUID CPU-Z.
    None of the BSOD mentioned specifically your drivers for your Graphic Card, so i would not do that at the moment.

    Could you test with only the under the heatsink installed memory module.
    HWmonitor uses the same driver, HWmonitor caused those crashes.

    @longtimepie, have you done what I asked?
    Run the memory test again on each stick in each used slot till 15 passes and find out what stick/slot is giving errors.
      My Computers


  7. Posts : 61
    windows 10
    Thread Starter
       #7

    Hello again, sorry for the delay, i have tested with only the "under the heatsync RAM" it is the other stick that i cannot test solo.
    But only 2 passes. do you really think it is neccesary to do more?

    Sorry for misspellings.
      My Computer


  8. Posts : 14,894
    Windows 10 Pro
       #8

    Yes, only 2 passes could mean the errors are not found because you didn't run the test long enough.
      My Computers


  9. Posts : 61
    windows 10
    Thread Starter
       #9

    roger that, i will run it the full 15 on the single stick.
      My Computer


  10. Posts : 61
    windows 10
    Thread Starter
       #10

    Just finished the memtest with the single RAM stick, here are the results.

    + System
    - Provider
    [ Name] Microsoft-Windows-MemoryDiagnostics-Results
    [ Guid] {5F92BC59-248F-4111-86A9-E393E12C6139}
    EventID 1102
    Version 0
    Level 2
    Task 0
    Opcode 0
    Keywords 0x8000000000000000
    - TimeCreated
    [ SystemTime] 2016-01-12T18:39:36.040253700Z
    EventRecordID 2536
    Correlation
    - Execution
    [ ProcessID] 2512
    [ ThreadID] 1556
    Channel System
    Computer DESKTOP-UKKF5N6
    - Security
    [ UserID] S-1-5-18

    - UserData
    - Results
    LaunchType Manual
    CompletionType Fail
    MemorySize 8093
    TestType 12
    TestDuration 26890
    TestCount 165
    NumPagesTested 2017475
    NumPagesUnTested 2112
    NumBadPages 1
    T1NumBadPages 0
    T2NumBadPages 0
    T3NumBadPages 0
    T4NumBadPages 0
    T5NumBadPages 0
    T6NumBadPages 0
    T7NumBadPages 0
    T8NumBadPages 0
    T9NumBadPages 0
    T10NumBadPages 0
    T11NumBadPages 0
    T12NumBadPages 0
    T13NumBadPages 0
    T14NumBadPages 0
    T15NumBadPages 0
    T16NumBadPages 0
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 03:51.
Find Us




Windows 10 Forums