In the memory tab of my BIOS is shows the memory:
frequency at 3200MHz
Vol_CHAB 1.196 V
Vol_CHCD 1.193V
But if i understand correctly, on the first page it showed that my Ram was running at 2333 MHz.
I can take a picture if it will help.
Are your specs updated with the new memory?
Please run CPU-Z | Softwares | CPUID, open it and make screenshots of the following tabs
- CPU
- Mainboard
- Memory
- SPD*
- Graphics
*SPD shows the details of each module, you can show the details by choosing different slots in the left upper corner.
Please make screenshots of each module.
Please post each screenshot in your next reply/replies.
Copy that, Im installing now will update as soon as.
I will do the SPD nextAttachment 62345
SPDAttachment 62346
Not sure if it makes a difference but i did have a small game (hearthstone) running in the background whilst i took all of these screenshots
Just experianced a new BSOD =/
SPECIAL_POOL_DETECTED_MEMORY_CORRUPTION
Attachment 62375
Here is the DMp zip
Please disable driver verifier
- Open an admin command prompt
- Enter "verifier/reset" (without quotes)
I recommend to run the memory test a.s.a.p.
From my understanding you have used driver verifier, I don't know what settings you used, but the Faulty hardware corrupted page error is caused by driver verifier where however no driver is flagged what usually stated hardware problems as it says
Code:Probably caused by : hardware ( REGION_PAGED_OUT )
Well that is very strange. i have reset the verefier via command prompt and ill let you guys know how the memtest goes.
Quote