Windows 10: Irql not less or equal BSOD windows 10

Page 5 of 11 FirstFirst ... 34567 ... LastLast
  1.    04 Feb 2016 #41

    In the memory tab of my BIOS is shows the memory:
    frequency at 3200MHz
    Vol_CHAB 1.196 V
    Vol_CHCD 1.193V

    But if i understand correctly, on the first page it showed that my Ram was running at 2333 MHz.
    I can take a picture if it will help.
      My ComputerSystem Spec

  2. axe0's Avatar
    Posts : 13,723
    Windows 10 Pro
       04 Feb 2016 #42

    Are your specs updated with the new memory?

    Please run CPU-Z | Softwares | CPUID, open it and make screenshots of the following tabs

    • CPU
    • Mainboard
    • Memory
    • SPD*
    • Graphics

    *SPD shows the details of each module, you can show the details by choosing different slots in the left upper corner.
    Please make screenshots of each module.

    Please post each screenshot in your next reply/replies.
      My ComputersSystem Spec

  3.    04 Feb 2016 #43

    Copy that, Im installing now will update as soon as.
      My ComputerSystem Spec

  4.    04 Feb 2016 #44

    I will do the SPD nextAttachment 62345
      My ComputerSystem Spec

  5.    04 Feb 2016 #45

    SPDAttachment 62346
    Not sure if it makes a difference but i did have a small game (hearthstone) running in the background whilst i took all of these screenshots
      My ComputerSystem Spec

  6.    04 Feb 2016 #46

    Just experianced a new BSOD =/

      My ComputerSystem Spec

  7. axe0's Avatar
    Posts : 13,723
    Windows 10 Pro
       04 Feb 2016 #47

    OK, run the dm log collector again and upload a new zip file in your next reply please.
      My ComputersSystem Spec

  8.    04 Feb 2016 #48

    Attachment 62375

    Here is the DMp zip
      My ComputerSystem Spec

  9. axe0's Avatar
    Posts : 13,723
    Windows 10 Pro
       04 Feb 2016 #49

    Please disable driver verifier
    • Open an admin command prompt
    • Enter "verifier/reset" (without quotes)

    I recommend to run the memory test a.s.a.p.
    From my understanding you have used driver verifier, I don't know what settings you used, but the Faulty hardware corrupted page error is caused by driver verifier where however no driver is flagged what usually stated hardware problems as it says
    Probably caused by : hardware ( REGION_PAGED_OUT )
      My ComputersSystem Spec

  10.    04 Feb 2016 #50

    Well that is very strange. i have reset the verefier via command prompt and ill let you guys know how the memtest goes.
      My ComputerSystem Spec

Page 5 of 11 FirstFirst ... 34567 ... LastLast

Related Threads
Hi, i've been having several BSODs related to "IRQL not less or equal" and "driver irql not less or equal too" after upgrading to windows 10. It happens only once, during start up and it will be fine again after windows restarts itself. Attached...
I am getting a BSOD with 2 different errors (what it's shown me so far): "IRQL not less or equal to" and also "Driver_Irql not less or equal to". I am using Windows 10. My upgrade was about a month ago. I use this Alienware M17XR3 laptop to mostly...
BSOD irql not less or equal in BSOD Crashes and Debugging
Upgraded Win 7 Pro Dell laptop to Win 10 Pro. Screen resolution changed on first win 10 boot and other resolutions greyed out. Windows update says unable to update Intel HD graphics drivers. Downloaded win 10 drivers from Intel site and...
Hi, I am sorry, but I couldn't post a file because I am currently unable to use my computer. But anyway, I originally posted this question on another answer website, and somebody started helping me and then...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 18:30.
Find Us