New
#21
Sorry for the massive delay, i had a very tough time getting to the RAM underneath my CPU cooler... big annoying bloddy thing. Im starting the memtest of a single stick now.
Sorry for the massive delay, i had a very tough time getting to the RAM underneath my CPU cooler... big annoying bloddy thing. Im starting the memtest of a single stick now.
Just finished testing on the other single RAM stick (from under the heatsync) in a different slot 8 passes finished with no errors.
I will test the other RAM stick in the same slot over night. Will update the results tomorrow.
So i ran the test on that single stick of RAM in the same slot as the other it ended up with a full page of errors before even compelteing 10% of the first pass, i let it run till the morning anyway since it was late but it was a whole sea of red errors.
So i guess that i should just replace the RAM then? do you need the error codes at all?>
Already done, i am waiting on a response now. :)
Thanks for all the help
It was a matched pair yes but i have not asked if I need too. Do you think that it is likely?
Hello again guys, So i have had the new RAM for a day and already experianced a new BSOD. The system was not under a massive amount of stress.
Error Code
Faulty hardware corrupted page error
I will try and find the error on event viewer now.
Always test the new components before using.
Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 10 Forums
Note
MemTest86+ needs to be run for at least 8 passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.