Random BSODs 0x00000003xB while Multitasking or playing games.

Page 2 of 3 FirstFirst 123 LastLast

  1. Posts : 14,897
    Windows 10 Pro
       #11

    INeedhelpMan said:
    -My RAM is DDR3 1600Mhz and the M5a97 R2.0 LE/Motherboard should support this. (I am guessing. Please correct me if I am wrong.)
    There are many DDR3 modules running 1600Mhz from many different memory manufacturers.
    According to the manual, your motherboard does NOT support your memory part numbers.

    Have you changed your motherboard in the time you have your system?
      My Computers


  2. Posts : 15
    Windows 10 64 bit.
    Thread Starter
       #12

    axe0 said:
    There are many DDR3 modules running 1600Mhz from many different memory manufacturers.
    According to the manual, your motherboard does NOT support your memory part numbers.

    Have you changed your motherboard in the time you have your system?
    No.

    I haven't changed anything. The computer worked fine for over a year and a half with these RAM sticks.
    I gamed for over 400 hours on Battlefield 4 on High settings 1920x1080 resolution.
    No BSODs occured during this (400+) + hundreds of hours of work on this computer. Until recently.


    I do notice that is the 2013 manual version for the motherboard.

    How about all the DDR3 rams that was produced after the manual was printed?

    Are they listed on there?

    Can my hard drive be a memory problem?
      My Computer


  3. Posts : 14,897
    Windows 10 Pro
       #13

    Just to note, I checked the 2015 manual version, I can't read german (2013 version).
      My Computers


  4. Posts : 15
    Windows 10 64 bit.
    Thread Starter
       #14

    axe0 said:
    Just to note, I checked the 2015 manual version, I can't read german (2013 version).

    The PDF /manual you sent me says 2013 on the top left corner on the second page.
      My Computer


  5. Posts : 654
    windows 10 Pro
       #15

    Can my hard drive be a memory problem?
    You can always test your HDD for problems or faults.

    check/analyse the integrity of your HDD you can use Sea Tools
    Download from here http://www.sevenforums.com/tutorials/313457-seatools-dos-windows-how-use.html

    Windows has this program chkdsk See for info and how to use

    Disk Check - Windows 7 Help Forums

      My Computer


  6. Posts : 14,897
    Windows 10 Pro
       #16

    INeedhelpMan said:
    The PDF /manual you sent me says 2013 on the top left corner on the second page.
    Lets say it this way, original release 2013 with version E8047.
      My Computers


  7. Posts : 15
    Windows 10 64 bit.
    Thread Starter
       #17

    lifetec said:
    You can always test your HDD for problems or faults.

    check/analyse the integrity of your HDD you can use Sea Tools
    Download from here http://www.sevenforums.com/tutorials/313457-seatools-dos-windows-how-use.html

    Windows has this program chkdsk See for info and how to use

    Disk Check - Windows 7 Help Forums

    Thanks. I will try it. My hard drive makes a small clicking noise but it is so minimal. I probably got used to it, I am not sure if it is normal or unusual. I will try to record it. Nvm. I don't have a good microphone.

    Thank you for all the help so far guys. I really appreciate it.
    Last edited by INeedhelpMan; 12 Jan 2016 at 15:50.
      My Computer


  8. Posts : 15
    Windows 10 64 bit.
    Thread Starter
       #18

    TURNS out it was the hard drive. I removed the faulty one and installed windows on my second drive.

    Now my Windows start up in less then 30 seconds.

    Everything is quick and smooth.

    Thank you for taking the time to help me guys.

    It wasn't the RAM lol......
    Last edited by INeedhelpMan; 18 Jan 2016 at 22:15.
      My Computer


  9. Posts : 15
    Windows 10 64 bit.
    Thread Starter
       #19

    ....
    Last edited by INeedhelpMan; 13 Jan 2016 at 19:06.
      My Computer


  10. Posts : 14,897
    Windows 10 Pro
       #20

    @INeedhelpMan,
    From your edited reply I understood you think I am an expert or pro or something at this, I am a person with possible one of the least experience in BSOD debugging from the Windows 10 Help Forums, anyone from my level could be in the wrong direction sometimes.

    If you don't appreciate what I said, you can formulate it in another way then calling it half ***** answers.
      My Computers


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 16:37.
Find Us




Windows 10 Forums