Windows 10: Fresh install of Windows 10 64bit and now getting BSOD. Solved


  1. Posts : 4
    Microsoft Windows 10 Pro 64-bit
       06 Jan 2016 #1

    Fresh install of Windows 10 64bit and now getting BSOD.


    Hi,

    So I upgraded my system. Bought a new motherboard, CPU, CPU Cooler, RAM, PSU & SSD.

    Installed windows 10, worked fine for the first week.

    Now when I start my PC in the morning or from when I get in from work, I get a BSOD when the PC Boots first time.

    When it restarts, it loads windows fine without issues.

    I've never had a BSOD happen while in the O/S, however did once have a funky issue where once it loaded my desktop, it started to flicker, as if Explorer.exe was continuously restarting (On this occasion, I held the hard reset button in and once restarted was fine)

    Not sure cause...

    I am running:

    Windows 10 64bit,
    Intel Core i7-4790K 4.0GHz Quad-Core Processor
    MSI Z97-GAMING 5 ATX LGA1150 Motherboard
    Corsair Vengeance Pro 16GB (2 x 8GB) DDR3-1866 Memory
    4GB ASUS GTX670 DIRECT CU2
    750watt Corsair PSU
    (The only 'old' thing is my GFX Card, which I bought in 2012).

    Any help much appreciated.

    Regards,

    RedArrow.
      My System SpecsSystem Spec

  2. axe0's Avatar
    Posts : 11,049
    Windows 10 Pro / Windows 10 TP / Windows 8.1 Pro / Windows 7 Pro
       10 Jan 2016 #2

    Hi RedArrow,

    Welcome to the 10forums and I am sorry for the delay.

    I've been a little busy past few days as you might notice when looking at other threads.

    Please turn off fast startup and let me know how it goes
    Fast Startup - Turn On or Off in Windows 10 - Windows 10 Forums
    Code:
    Event[1469]:
      Log Name: System
      Source: Microsoft-Windows-Kernel-Boot
      Date: 2016-01-06T22:04:00.602
      Event ID: 29
      Task: N/A
      Level: Error
      Opcode: Info
      Keyword: N/A
      User: S-1-5-18
      User Name: NT AUTHORITY\SYSTEM
      Computer: DESKTOP-GVONE8G
      Description: 
    Windows failed fast startup with error status 0xC0000001.
    Please fill in your system specs in your 'My System Specs' for easier lookup for those that are trying to help
    Please follow this tutorial and download the tool. The tool will give you detailed information about your system specs, please fill in your system specs more completely.
    How to fill in your system specs:

      My System SpecsSystem Spec


  3. Posts : 4
    Microsoft Windows 10 Pro 64-bit
       11 Jan 2016 #3

    Hi,

    Thanks for getting back to me.

    Yes, I understand you are busy and no worries regarding the delay- After all, you are helping people for free and in your own time.

    I have done as you asked, and updated my 'PC Spec'.

    I will restart, and post back soon with regards to how my pc is doing after changing the boot from fast.

    Many thanks.
      My System SpecsSystem Spec


  4. Posts : 4
    Microsoft Windows 10 Pro 64-bit
       15 Jan 2016 #4

    Hi Axe0,

    Many thanks for your help with my issue.

    It seems, since my last post- My issue has been fixed! I disabled the fastboot as suggested, and haven't had a single BSOD since doing so!

    I'm over joyed, that something so annoying was fixed as simply as that!

    Still curious as to why it'd cause the BSOD's though.. considering, Microsoft have it enabled by default?

    Anyhow, just wanted to say a MASSIVE thank you for all your help! It's very appreciated!

    Marking this as solved now!
      My System SpecsSystem Spec

  5. axe0's Avatar
    Posts : 11,049
    Windows 10 Pro / Windows 10 TP / Windows 8.1 Pro / Windows 7 Pro
       15 Jan 2016 #5

    It is turned on by default yes, the reason is a faster boot.
    However, sometimes it doesn't save the image of Windows and drivers proper what causes problems.
    Fast startup (aka: hiberboot, hybrid boot, or hybrid shutdown) is turned on by default in Windows and is a setting that helps your PC start up faster after shutdown. Even faster than hibernate. Windows does this by saving an image of the Windows kernel and loaded drivers to the hiberfile (C:\hiberfil.sys) upon shutdown so when you start your PC again, Windows simply loads the hiberfile (C:\hiberfil.sys) into memory to resume your PC instead of restarting it.
    In case you missed it, below is an image displaying how it works.
    Attachment 58967

    Glad to hear your problem is solved
      My System SpecsSystem Spec


 

Related Threads
Solved Fresh, clean install- frequent BSOD in BSOD Crashes and Debugging
Hi guys, hate to introduce myself this way but need some help. PC is Lenovo Erazer X510, has fresh, clean installed Win 10 Pro. Getting BSODs. Tried reading the dump with WhoCrashed, not getting any real info: crash dump file:...
Fresh Install BSOD while using Microsoft Edge in BSOD Crashes and Debugging
Hey, Was having various issues with my computer so i decided to do a fresh install of Windows 10. I've faced two BSOD already, usually i was getting these due to graphic card issues previously however i haven't even installed any drivers yet. ...
Various BSOD after fresh win 10 install in BSOD Crashes and Debugging
Hello everyone, I am having a huge problem since 4 days with my desktop PC. I had windows 8.1 running and had lots of different BSODs. I then decided to format my SSD (128GB) and install fresh windows 10. At the beginning (first hours) everything...
This is on an old eMachines M6805 laptop that originally came with XP 32-bit. I put a fresh install of Windows 7 32-bit on it which ran fine. I then upgraded that to Windows 10 32-bit. The first time it booted up I was able to log in but got a...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 12:16.
Find Us
Twitter Facebook Google+ Ten Forums iOS App Ten Forums Android App



Windows 10 Forums