Kernal Security Check Failure

Page 1 of 2 12 LastLast
  1.    06 Jan 2016 #1

    Kernal Security Check Failure

    Hi this is my first time using this forum so if I make a booboo forgive me XD. I'm kinda a novice at computers.

    Anyways i keep getting the Kernal Security Check Failure BSODbut don't know what's causing the problem. I tried updating my intel HD grphics driver 4600 because it kept showing "driver has stopped responding and has recovered" from time to time so I thought this was causing the issue of the BSOD, but apparently not -.-

    Pls help :3

    Cheers in advance
    Last edited by Annonymous17; 06 Jan 2016 at 18:09.
      My ComputerSystem Spec

  2. axe0's Avatar
    Posts : 13,819
    Windows 10 Pro
       07 Jan 2016 #2

    Be sure your system is clean of bypasses/cracks
    Event[5966]:  Log Name: System
      Source: Microsoft-Windows-TaskScheduler
      Date: 2016-01-06T17:36:18.809
      Event ID: 414
      Task: Task Misconfiguration
      Level: Warning
      Opcode: Info
      Keyword: N/A
      User: S-1-5-18
      Computer: Murray-PC
    Task Scheduler service found a misconfiguration in the NT TASK\AutoKMS definition. Additional Data: Error Value: C:\WINDOWS\AutoKMS\AutoKMS.exe.
    Be sure to NOT switch between GPU's, the switching feature isn't proper implemented what may causes problems.

    1 crash seems to be forced, because it is only happening when someone/something is forcing the crash
    The 0xdeaddead is the crash I mean
    Are you developing a driver or something?
    Driver Reference Table - rspcrash64.sys
    *** WARNING: Unable to verify timestamp for rspCrash64.sys
    *** ERROR: Module load completed but symbols could not be loaded for rspCrash64.sys
    Please check your manufacturer for driver updates and update/reinstall every driver for Windows 10.

    Please update/reinstall/remove following drivers/software
    Driver Reference Table - semav6msr64.sys
    Driver Reference Table - SSPORT.sys
      My ComputersSystem Spec

  3.    07 Jan 2016 #3

    All your dumpfiles are:
     Use !analyze -v to get detailed debugging information.
    BugCheck 139, {3, ffffd00021f06550, ffffd00021f064a8, 0}
    Probably caused by : ntkrnlmp.exe ( nt!KiFastFailDispatch+d0 )
    Followup: MachineOwner
    6: kd> !analyze -v
    *                                                                             *
    *                        Bugcheck Analysis                                    *
    *                                                                             *
    A kernel component has corrupted a critical data structure.  The corruption
    could potentially allow a malicious user to gain control of this machine.
    Arg1: 0000000000000003, A LIST_ENTRY has been corrupted (i.e. double remove).
    Arg2: ffffd00021f06550, Address of the trap frame for the exception that caused the bugcheck
    Arg3: ffffd00021f064a8, Address of the exception record for the exception that caused the bugcheck
    Arg4: 0000000000000000, Reserved
    The dumpfiles do not point to a specific driver that could be causing the issue .
    But in the eventviewer i found a pattern of Filecrypt driver and crashing of your system. But i saw in your latest dumpfile that you already updated this program to a windows 10 version.

    But i found more older drivers.
    Please update them to windows 10 compatible drivers.
    Ckldrv64 Sat Jun 13 02:02:22 2009
    Driver Description: CrypKey software
    Driver Update Site:

    ctxusbm Thu May 02 21:23:47 2013
    Driver Description: Citrix ICA Client USB Monitor Driver
    Driver Update Site:

    Sentinel64 Mon Jun 02 08:14:55 2008
    Driver Description: Rainbow Tech/SafeNet USB Security Device
    Driver Update Site:

    SSPORT Fri Aug 12 01:07:32 2005
    Driver Description: Samsung printer driver
    Driver Update Site:

    SvThANSP Sat Oct 12 05:08:38 2013
    Driver Description: Savitech Hotkey Driver
    Driver Update Site: None at
    Must get from OEM.

    VMfilt64 Fri Jul 31 05:40:32 2009
    Driver Description: VIA audio driver
    Driver Update Site:

    wacommousefilter Fri Feb 16 19:12:17 2007
    wacomvhid Tue Sep 22 01:29:14 2009
    Driver Description: Wacom(tablet) Mouse Filter
    Driver Update Site: or at the OEM support website if it came built in to your system

    And see what happens.
      My ComputerSystem Spec

  4. axe0's Avatar
    Posts : 13,819
    Windows 10 Pro
       07 Jan 2016 #4

    @lifetec, you do know that some of these drivers need to be updated via the manufacturer?
      My ComputersSystem Spec

  5.    07 Jan 2016 #5

    axe0 said: View Post
    @lifetec, you do know that some of these drivers need to be updated via the manufacturer?
    Yes, and that is already mentioned in my post.
      My ComputerSystem Spec

  6.    07 Jan 2016 #6

    There wiered thing is I specifically went into device manager and literally tried updating all the devices there one by one but it says that they are all up to date :/

    @axe0 as for the forced crash I used whocrashed to do that to see if my windows were writing out the crshes correctly or not XD
      My ComputerSystem Spec

  7.    07 Jan 2016 #7

    And to fix my problem all I have to do is reinstall all the drivers/softwares mention above via the websites mentioned or from their manufacturer right?

    @lifetec as for the program which you saw I updated to a windows 10 compatible, would you mind telling me what it was?

    Cheers :)
      My ComputerSystem Spec

  8. axe0's Avatar
    Posts : 13,819
    Windows 10 Pro
       07 Jan 2016 #8

    I would recommend to visit the site of your manufacturer and install the Windows 10 drivers.

    This response from device manager is the reason why it is normally not suggested to update drivers in device manager.
    There wiered thing is I specifically went into device manager and literally tried updating all the devices there one by one but it says that they are all up to date :/
    Driver Reference Table - filecrypt.sys
    It is a system driver that can only be updated via Windows Update.
      My ComputersSystem Spec

  9.    07 Jan 2016 #9

    @axe0 @lifetec I have a venom black book 15 s pro (M01907) and when I checked my OEM website (BlackBook 15 S Pro (M01907) (M01908) (M01918) Drivers Software - Venom Performance Computers - Official Site) they didn't make any updates to the driver for windows 10 optimise. But if I check the 2nd and 3rd gen of my laptop and they had optimised drives for windows 10.
    Not sure if i should ask the venom manufactuer or you guys but is it possible to use the 2nd and 3rd optomised drivers as an update?
    Cheers again :)
      My ComputerSystem Spec

  10. axe0's Avatar
    Posts : 13,819
    Windows 10 Pro
       07 Jan 2016 #10

    I would say no, because it is not for your laptop.
    I would then also suggest to revert to the previous OS for which you can install drivers.

    Please fill in your system specs
    Please follow this tutorial and download the tool. The tool will give you detailed information about your system specs, please fill in your system specs more completely.
    How to fill in your system specs:

      My ComputersSystem Spec

Page 1 of 2 12 LastLast

Related Threads
Hi there :) Recently, I upgraded my laptop from Windows 8.1 to Windows 10, but randomly, I get lots of BSODs, either Kernel Security Check Failure or Video TDR Failure igdkmd64.sys . However, these do not happen at the exact same time, ie when I...
Kernel security check failure in BSOD Crashes and Debugging
After i upgraded to windows 10 I've been getting frequent BSOD Kernel security check failure. I tried updating drivers, scanning for viruses and doing mem test but nothings worked so far. Any help would be appreciated. Thanks!
Kernel security check failure in BSOD Crashes and Debugging
Hi everyone, So far I've been getting a number of different BSODs most commonly Kernel security check failure. After having read a number of different threads on the matter I have tried the following Memtest did 10 passes and got 0 errors...
Solved Kernal Security Check bluescreen, no code. in BSOD Crashes and Debugging
Hi there! I randomly received a "Kernal Security Check," with no code associated with it. I'm thinking it could be this Corsair K70 RGB I just installed. If it is, I'm just going to send this thing back. I know people have had tons of problems...
Kernal Security Check Failure! in BSOD Crashes and Debugging
42985 I installed Windows 10 Pro on a new RAID 1 HDD array just a few hours ago today and it's already BSODing! It happened, I think, around 30 minutes after the most recent system power up & log in. All I was doing was copying files from an...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 16:24.
Find Us