Random BSODs


  1. pho
    Posts : 3
    Windows 10 Pro 1511
       #1

    Random BSODs


    Hi hope u guys can help me. would be very thankful :)

    Got a new system 1-2 Months old. Fresh installed Windows 10 Pro Build 1511.
    But I am getting Bluescreens (not sure what the cause is) random. For example once I plugged in an USB-Stick I got an Bluescreen. Last time (yesterday) I was pushing the Windows 10 shutdown button -> got an bluescreen! This made me kind of sceptical what is wrong with my system?

    I allready made one memtest86+ (5.01) test (1 pass no errors) but it detected my RAM as an DDR3 module so will run the test again with Memtest86 (original one) and will see what is happening but I think RAM is fine.

    Side note: didn't overlock my system.


    here are my needed files (my hardware specs are also in my profile here)
    Last edited by pho; 07 Jan 2016 at 10:18.
      My Computer


  2. Posts : 14,897
    Windows 10 Pro
       #2

    Please upload the zip directly, 3rd party uploaders aren't prefered unless needed and in your case not necessary :)
    Please read How to upload files

    Regarding MemTest86+, you need to run at least 8 complete passes for conclusive results



    Diagnostic Test

     RAM TEST


    Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 10 Forums

    Note   Note


    MemTest86+ needs to be run for at least 8 passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.
      My Computers


  3. pho
    Posts : 3
    Windows 10 Pro 1511
    Thread Starter
       #3

    axe0 said:
    Please upload the zip directly, 3rd party uploaders aren't prefered unless needed and in your case not necessary :)
    Please read How to upload files

    Regarding MemTest86+, you need to run at least 8 complete passes for conclusive results



    Diagnostic Test

     RAM TEST


    Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 10 Forums

    Note   Note


    MemTest86+ needs to be run for at least 8 passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.
    Will do the 8 pass memtest86+ when u say it's necessary but here a first my files
      My Computer


  4. Posts : 14,897
    Windows 10 Pro
       #4

    Uninstall Eset while troubleshooting and use Windows Defender as alternative
    How do I manually uninstall my Windows ESET product?ESET Knowledgebase

    Code:
    ffffd000`22bfa6f8  fffff801`d0b2cafbUnable to load image \SystemRoot\system32\DRIVERS\eamonm.sys, Win32 error 0n2
    *** WARNING: Unable to verify timestamp for eamonm.sys
    *** ERROR: Module load completed but symbols could not be loaded for eamonm.sys
     eamonm+0x2cafb
    Please try following
    • Check your manufacturer for driver updates, update/reinstall the drivers present for Windows 10
    • Update TrueCrypt
    • Remove Gigabyte software, known for causing bluescreens.
    • Update the Creative drivers


    After above is done, please run MemTest86+
      My Computers


  5. pho
    Posts : 3
    Windows 10 Pro 1511
    Thread Starter
       #5

    axe0 said:
    Uninstall Eset while troubleshooting and use Windows Defender as alternative
    How do I manually uninstall my Windows ESET product?ESET Knowledgebase

    Code:
    ffffd000`22bfa6f8  fffff801`d0b2cafbUnable to load image \SystemRoot\system32\DRIVERS\eamonm.sys, Win32 error 0n2
    *** WARNING: Unable to verify timestamp for eamonm.sys
    *** ERROR: Module load completed but symbols could not be loaded for eamonm.sys
     eamonm+0x2cafb
    Please try following
    1) Check your manufacturer for driver updates, update/reinstall the drivers present for Windows 10
    2) Update TrueCrypt
    3) Remove Gigabyte software, known for causing bluescreens.
    4) Update the Creative drivers




    After above is done, please run MemTest86+
    1) Did check gigabyte.com nothing new. Intel Drive update utility doesen't detect any driver present on my system
    2) TrueCrypt is the newest (working version, 7.2 doesn't to any thing new) version. they stopped their development.
    3) Removed all Gigabyte related software (2 of them)
    4) Already newest Creative drivers. "The newest versions are already installed on your System".
    Attachment 57682

    Hope removing the Gigabyte Programs will do it. Otherwise will uninstall Eset and post new log files. Thank you very much for now.
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 20:42.
Find Us




Windows 10 Forums