Random BSOD


  1. Posts : 3
    Microsoft Windows 10 Home Single Language 64-bit 10586 Multiprocessor Free
       #1

    Random BSOD


    Hi there,

    I have been getting BSOD's. I attach the zip file with the diagnostic information.

    Spec are:

    1 4gd DDR3 Stick of Ram
    AS Rock Motherboard with Intel Chip and Intel Video Driver H61M VS4

    I have updated Bios and motherboard Drivers

    Cheers,

    Sergio
    ps first time posting so if I have missed anything I do apologise at the outset.
      My Computer


  2. Posts : 14,897
    Windows 10 Pro
       #2

    It seems the Huawei enumerator driver is causing it.
    An update for the driver should help
    Driver Reference Table - ew_jubusenum.sys or
    http://consumer.huawei.com/en/support/index.htm
    Code:
    *** WARNING: Unable to verify timestamp for ew_jucdcecm.sys*** ERROR: Module load completed but symbols could not be loaded for ew_jucdcecm.sys
    3: kd> lmvm ew_jubusenumstart             end                 module name
    fffff801`bca70000 fffff801`bca8c000   ew_jubusenum T (no symbols)           
        Loaded symbol image file: ew_jubusenum.sys
        Image path: \SystemRoot\System32\drivers\ew_jubusenum.sys
        Image name: ew_jubusenum.sys
        Timestamp:        Mon Mar 04 09:32:48 2013 (51345C30)
        CheckSum:         00026561
        ImageSize:        0001C000
        Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
    Daemon tools, Alcohol 120% and Power Archiver Pro uses SCSI Pass Through Direct (SPTD), which is a well known cause for BSOD's.
    Please remove Daemon Tools and run the SPTD pass through remover.

    1. Uninstall Daemon Tools
    2. Download the SPTD standalone installer and follow these steps:
      • Double click the executable to open it
      • Click on the button shown below




    If the button is grayed out, like in the image, there is no more SPTD installation on your system, and you can close the window

    Please fill in your system specs
    Please follow this tutorial and download the tool. The tool will give you detailed information about your system specs, please fill in your system specs more completely.
    How to fill in your system specs:

      My Computers


  3. Posts : 3
    Microsoft Windows 10 Home Single Language 64-bit 10586 Multiprocessor Free
    Thread Starter
       #3

    Thanks axe0 i will do the below and reply asap

    axe0 said:
    It seems the Huawei enumerator driver is causing it.
    An update for the driver should help
    Driver Reference Table - ew_jubusenum.sys or
    http://consumer.huawei.com/en/support/index.htm
    Code:
    *** WARNING: Unable to verify timestamp for ew_jucdcecm.sys*** ERROR: Module load completed but symbols could not be loaded for ew_jucdcecm.sys
    3: kd> lmvm ew_jubusenumstart             end                 module name
    fffff801`bca70000 fffff801`bca8c000   ew_jubusenum T (no symbols)           
        Loaded symbol image file: ew_jubusenum.sys
        Image path: \SystemRoot\System32\drivers\ew_jubusenum.sys
        Image name: ew_jubusenum.sys
        Timestamp:        Mon Mar 04 09:32:48 2013 (51345C30)
        CheckSum:         00026561
        ImageSize:        0001C000
        Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
    Daemon tools, Alcohol 120% and Power Archiver Pro uses SCSI Pass Through Direct (SPTD), which is a well known cause for BSOD's.
    Please remove Daemon Tools and run the SPTD pass through remover.

    1. Uninstall Daemon Tools
    2. Download the SPTD standalone installer and follow these steps:
      • Double click the executable to open it
      • Click on the button shown below





    If the button is grayed out, like in the image, there is no more SPTD installation on your system, and you can close the window

    Please fill in your system specs
    Please follow this tutorial and download the tool. The tool will give you detailed information about your system specs, please fill in your system specs more completely.
    How to fill in your system specs:

      My Computer


  4. Posts : 3
    Microsoft Windows 10 Home Single Language 64-bit 10586 Multiprocessor Free
    Thread Starter
       #4

    Hi axe0, I have removed Daemon Tools, updated the drivers for huwaei and updated system spec on the forum.

    So far so good no bsod since yesterday.

    Thank-you for your help, much appreciated!!

    axe0 said:
    It seems the Huawei enumerator driver is causing it.
    An update for the driver should help
    Driver Reference Table - ew_jubusenum.sys or
    http://consumer.huawei.com/en/support/index.htm
    Code:
    *** WARNING: Unable to verify timestamp for ew_jucdcecm.sys*** ERROR: Module load completed but symbols could not be loaded for ew_jucdcecm.sys
    3: kd> lmvm ew_jubusenumstart             end                 module name
    fffff801`bca70000 fffff801`bca8c000   ew_jubusenum T (no symbols)           
        Loaded symbol image file: ew_jubusenum.sys
        Image path: \SystemRoot\System32\drivers\ew_jubusenum.sys
        Image name: ew_jubusenum.sys
        Timestamp:        Mon Mar 04 09:32:48 2013 (51345C30)
        CheckSum:         00026561
        ImageSize:        0001C000
        Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
    Daemon tools, Alcohol 120% and Power Archiver Pro uses SCSI Pass Through Direct (SPTD), which is a well known cause for BSOD's.
    Please remove Daemon Tools and run the SPTD pass through remover.

    1. Uninstall Daemon Tools
    2. Download the SPTD standalone installer and follow these steps:
      • Double click the executable to open it
      • Click on the button shown below





    If the button is grayed out, like in the image, there is no more SPTD installation on your system, and you can close the window

    Please fill in your system specs
    Please follow this tutorial and download the tool. The tool will give you detailed information about your system specs, please fill in your system specs more completely.
    How to fill in your system specs:

      My Computer


  5. Posts : 14,897
    Windows 10 Pro
       #5

    You're welcome :)

    Let me know in case of another bluescreen.
      My Computers


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 18:32.
Find Us




Windows 10 Forums