Page 1 of 5 123 ... LastLast
  1.    30 Dec 2015 #1
    Join Date : Dec 2015
    Posts : 37
    Windows 10

    driver_verifier_iomanager_violation BSOD loop on startup


    I've been having nothing but problems with Windows 10 since I upgraded from windows 7. All the parts I've had worked on 7 just fine. I upgraded to 10 and I've been getting BSOD randomly and especially on the startups. I even would get BSOD just from the upgrade to 10. I had to turn off turbo core and cool and quiet so it would get through the installation. I noticed one of my HDD broke in the process. Didn't work on any computer I tested it on. Might be a coincidence as it's 5 years old. A few days after I finally got 10 to work. I put my computer in a new case with a new PSU. It would work fine for a week or two and then it would BSOD randomly. I had an issue with Google Chrome in that it would slowly lock my computer up everytime I opened it. I initially thought my SSD was going bad but it's only 2 years old. I stopped using Chrome and the problem stopped for awhile. Every once and awhile I would get a BSOD randomly or on a startup but it would always fix itself. Now I'm getting a new error that is the worst yet.

    I use my computer for animations, rendering, gaming, browsing so it gets worked quite often but it doesn't crash during intense use. Now I'm completely stuck. I am getting this "driver verifier iomanager violation wdf01000.sys" BSOD everytime I boot up the computer. I don't remember installing anything new the last time I used it.

    When I get in to safe mode, a BSOD System_exception_error will pop up in 5 minutes or so. Sometimes it will be a kmode error. I noticed sometimes I would get it just starting up in safe mode. I barely managed to get the dump file off of there.

    I've attached text from the dump file below

    EDIT:
    Attachment 56559

    System Specs:
    Motherboard: Asus M5A97 LE R 2.0
    GPU: Nvidia GTX 580
    CPU: AMD 8350
    RAM: 16 GB
    SSD: Kingston v300 120 GB
    HDD: WD Black, Seagate barracuda, Toshiba
    PSU: 750 Rosewill Captsone 80 plus gold
    LG blu ray drive

    Last edited by bytes64; 01 Jan 2016 at 19:52.
      My ComputerSystem Spec
  2.    01 Jan 2016 #2
    Join Date : Jun 2015
    Posts : 12,957
    Windows 10 Pro

    According to the text you send, a virtual joystick driver is causing the crash
    Driver Reference Table - vmulti.sys
    For more analysis read BSOD Posting Instructions
      My ComputersSystem Spec
  3.    01 Jan 2016 #3
    Join Date : Dec 2015
    Posts : 37
    Windows 10
    Thread Starter

    Attachment 56552

    Thank you for your response. I posted the info in the attachment. I looked at the driver log myself and it looks like vmulti.sys is my drawing tablet driver.


    EDIT: I uninstalled the tablet driver. It now gets past the Windows logo part but immediately BSOD before I can login with DRIVER_PORTION_MUST_BE_NONPAGED

    EDIT 2: I did a sfc /scannow command and I'm not getting that error anymore BUT I'm still getting a SYSTEM_SERVICE_EXCEPTION BSOD as soon as I get in to Windows. Does this in safe mode sometimes too. This is the error I've been getting randomly from time to time the past few weeks.
    Last edited by bytes64; 01 Jan 2016 at 20:01.
      My ComputerSystem Spec
  4.    02 Jan 2016 #4
    Join Date : Jun 2015
    Posts : 12,957
    Windows 10 Pro

    Is your system complaining about your activation?
    Code:
    <LicensingStatus>SL_LICENSING_STATUS_UNLICENSED</LicensingStatus>
      My ComputersSystem Spec
  5.    02 Jan 2016 #5
    Join Date : Dec 2015
    Posts : 37
    Windows 10
    Thread Starter

    Quote Originally Posted by axe0 View Post
    Is your system complaining about your activation?
    Code:
    <LicensingStatus>SL_LICENSING_STATUS_UNLICENSED</LicensingStatus>
    Not that I know of. That's strange if it's saying that...

    I recently just got back in to Windows and it's been working for 7 hours nonstop. Worried the SYSTEM_SERVICE_EXCEPTION BSOD will come back as it's been random for weeks.
      My ComputerSystem Spec
  6.    02 Jan 2016 #6
    Join Date : Jun 2015
    Posts : 12,957
    Windows 10 Pro

    Please check Windows Updates and Activation - Windows 10 Forums where others can help finding out if there is any problem with your activation.

    Please disable driver verifier
    • Open an admin command prompt
    • Enter "verifier/reset" (without quotes)


    Updating the driver might resolve the crashes,
    Code:
    6: kd> lmvm vmultistart             end                 module name
    fffff801`d9910000 fffff801`d991a000   vmulti   T (no symbols)           
        Loaded symbol image file: vmulti.sys
        Image path: \SystemRoot\System32\drivers\vmulti.sys
        Image name: vmulti.sys
        Timestamp:        Wed Sep 17 04:47:48 2014 (5418F654)
        CheckSum:         0000DB12
        ImageSize:        0000A000
        Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
    Suggested to update following drivers too
    Driver Reference Table - Rt630x64.sys
    Driver Reference Table - PxHlpa64.sys
    Driver Reference Table - tap0901t.sys
      My ComputersSystem Spec
  7.    02 Jan 2016 #7
    Join Date : Dec 2015
    Posts : 37
    Windows 10
    Thread Starter

    I'll look in to it on that forum.



    The Huion website said the tablets were Windows 10 ready when I installed them. Hesitant to download again right now as things seem stable.

    I updated the realtek one but I'm not sure how to update the other 2 drivers. Not sure what program is using pxhlpa64.sys
      My ComputerSystem Spec
  8.    02 Jan 2016 #8
    Join Date : Jun 2015
    Posts : 12,957
    Windows 10 Pro

    I don't know about the last one either, the files aren't 100% about the installed programs and no program mentioned at Carrona.org was installed according to the files.

    The tap0901t is a network driver, usually part from VPN software or in this case also Google Earth.
      My ComputersSystem Spec
  9.    02 Jan 2016 #9
    Join Date : Dec 2015
    Posts : 37
    Windows 10
    Thread Starter

    Strange. Well I clicked to update the network adapter that was Tunngle and it said it was up to date already. Disabled the adapter for now as I don't use it.

    Would it be advisable to remove pxHlpa64.sys? How would I go about doing so?



    I also noticed I have 4 "Unknown Devices" under "Other Devices"
      My ComputerSystem Spec
  10.    03 Jan 2016 #10
    Join Date : Jun 2015
    Posts : 12,957
    Windows 10 Pro

    Don't update through device manager unless asked for, device manager rarely does say there are updates available.

    No, it is currently not known what program uses that driver. It could make the stability of your system worse then currently.
      My ComputersSystem Spec

 
Page 1 of 5 123 ... LastLast


Similar Threads
Thread Forum
Solved Bootloop BSOD DRIVER_VERIFIER_IOMANAGER_VIOLATION (HIDCLASS.sys)
Hi, When starting my PC normally it keeps crashing into BSOD with BSOD DRIVER_VERIFIER_IOMANAGER_VIOLATION (HIDCLASS.sys). This started after I started the driver verifier to check for driver errors. Now my PC is stuck in a bootloop...
BSOD Crashes and Debugging
Network Adapter BSOD loop, 0x000000c8
I recently upgraded to windows 10 and I am still running the windows 7 drivers for my Killer Wireless-N 1103 Network Adapter. Whenever I download or upload at high speeds I get a BSOD "IRQL_UNEXPECTED_VALUE" bug check code 0x000000c8, which would be...
BSOD Crashes and Debugging
BSOD Repair Loop Critical_Process_Died
Hi, I've been wrestling with this problem for last 2 days and I don't seem to be able to find an answer anywhere hence I'm posting here. Firstly, I can't generate the dumpfile as I can't access windows at all. I can't access it through any boot...
BSOD Crashes and Debugging
Solved BSOD Loop restart.
I've been experiencing startup issues with my PC since last night. I go to startup and startup freezes. It seems that something is either stuck or freezing up on loading. Since it doesn't fully boot up, I have been hitting the reset button or...
BSOD Crashes and Debugging
Desktop items scaling wrongly on first starup up
I am currently using a Samsung 40" TV UA40H5008 (1080p) as monitor, Graphic card R9 280X with latest Catalyst 15.7.1, running AMD VSR uping resolution to 1440p. Windows scaling to 100%. The strange thing about the visual is, on every first...
Graphic Cards
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 17:45.
Find Us
Twitter Facebook Google+ Ten Forums iOS App Ten Forums Android App



Windows 10 Forums