Several BSOD messages/Freezing/Crashing on New Hardware

  1. Posts : 1
    Windows 10

    Several BSOD messages/Freezing/Crashing on New Hardware

    For the last two months or so I've been getting freezes, crashes and blue screens on my primary windows pc. There doesn't appear to be any clear pattern to when these occur, but they do appear to happen at least once a day. I've no explanation as to what the root cause of these is. I've checked my dump files and at the moment the errors I've been getting are MEMORY_MANAGEMENT, IRQL_NOT_LESS_OR_EQUAL, KMODE_EXCEPTION_NOT_HANDLED, KERNEL_SECURITY_CHECK_FAILURE and SYSTEM_SERVICE_EXCEPTION. For the IRQL error which happens most frequently I checked my IRQ table and found that four pieces of hardware were in conflict, those being the usb host controller with the network card and the graphics card with the on board sound card. Whether this is a hardware or software fault I do not know. Every piece of hardware I have is pretty much brand new other than my RAM. I've run the windows memory diagnostic program and found one ram stick to have some sort of hardware fault. I removed that ram stick and continued to use the machine after that, however I've just had the machine freeze and crash once more. Any help you can provide is appreciated.

    Attachment 55790
      My Computer

  2. Posts : 14,897
    Windows 10 Pro

    If any Gigabyte software is installed, remove it. Gigabyte software is known for causing bluescreens.

    warning   Warning
    Programs that claim to update your drivers install either the wrong or corrupted drivers.
    If you have installed any driver with Driver Booster 3, please remove them as it may cause trouble.

    Diagnostic Test


    Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 10 Forums

    Note   Note

    MemTest86+ needs to be run for at least 8 passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.

    Update your Broadcom network driver
    Driver Reference Table - bcmwl63a.sys
    *** WARNING: Unable to verify timestamp for bcmwl63a.sys
    *** ERROR: Module load completed but symbols could not be loaded for bcmwl63a.sys
    7: kd> lmvm bcmwl63a
    start             end                 module name
    fffff801`af8a0000 fffff801`b035e000   bcmwl63a T (no symbols)           
        Loaded symbol image file: bcmwl63a.sys
        Image path: \SystemRoot\system32\DRIVERS\bcmwl63a.sys
        Image name: bcmwl63a.sys
        Timestamp:        Mon Jul 20 11:54:40 2015 (55ACC560)
        CheckSum:         00AC56E8
        ImageSize:        00ABE000
        Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
      My Computers


  Related Discussions
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 11:45.
Find Us

Windows 10 Forums