New
#21
I use Corsair Vengeance LPX DDR4 2x8GB 266 MHZ
In bios the ram settings is 2133MHz and the Voltage is 1,216v
Here is the last dump.
I use Corsair Vengeance LPX DDR4 2x8GB 266 MHZ
In bios the ram settings is 2133MHz and the Voltage is 1,216v
Here is the last dump.
No, that is a zip file, not a dump file.
Check in C:\Windows\Minidump for a file from the past 2 days.
should I upload all the dump file from 2015-12-30 -2016-01-01
Only upload the dump from today please.
Right click the file > copy > zip and upload the zip, you can't upload a .dmp file directly.
Todays dump file.
How do i clean the ram slots, canned air?
Use Isopropyl Alcohol and cotton swabs, dip some alcohol on a cotton swab and go gently over the contacts
An excellent guide for cleaning slots by @ICIT2LOL
Now as for the slots to clean them use a strip of old credit card (or any card thin enough some are better than others ) about 1/2 inch wide nip the corners off one end - preferably round them off hold a piece of thin lint free cloth over the end dab on some form of alcohol - isopropyl alcohol (what we swab the skin with before an injection) is good and GENTLY swipe along the slots.
This can also be done for the GPU slot/s and also the contacts of the sticks or cards - not the stick but some lint free cloth of course. See my pic for the sick but please be very gentle doing it if you are in any doubt - please ask before doing it but I use this all the time and have yet to damage anything.
Needless to say make sure all power is drained and you take anti static precautions
Attachment 56546
I haven't clean the ram because I don't have any Isopropyl Alcohol at home. I will do it when I have bought some from the store. Today when used my computer after sleep mode I got two new crashes. I upload the zip from dm_log_collector.
Again the dumps haven't been copied to the zip.
Please change the system language to english so I can read the logs proper :)