Windows 10: BSOD on my new computer

Page 2 of 4 FirstFirst 1234 LastLast

  1. Posts : 23
    Microsoft Windows 10 Pro 64 bitar 10586 Multiprocessor Free
    Thread Starter
       30 Dec 2015 #11

    I tested the ram with Memtest86, I let it run for 8 passes and it didn't find any errors. I tried to play game from steam but stem crashed. Then I tried to install a game that I got for Christmas. Steam crashed an I got an other blue screen.
      My ComputerSystem Spec

  2. axe0's Avatar
    Posts : 13,721
    Windows 10 Pro
       30 Dec 2015 #12

    Is Panda still removed?
      My ComputersSystem Spec


  3. Posts : 23
    Microsoft Windows 10 Pro 64 bitar 10586 Multiprocessor Free
    Thread Starter
       30 Dec 2015 #13

    Yes, Panda is removed.
      My ComputerSystem Spec

  4. axe0's Avatar
    Posts : 13,721
    Windows 10 Pro
       30 Dec 2015 #14

    Seems there is a leftover then.
    Code:
    \??\c:\program files\panda security url filtering\panda_url_filteringd.sys
    Please run driver verifier to find any offending driver



    BSOD on my new computer Diagnostic Test BSOD on my new computer
     DRIVER VERIFIER

    warning   Warning
    Please make a backup of your important files and get your rescue media or create one.
    Please create a restore point.

    Please follow this tutorial to run driver verifier.

    Driver verifier stresses your drivers and will crash your pc if any driver fails due to a violation.

    Driver verifier should be performed for a max of 48 hours, or when you have a bluescreen, whatever comes first.

    If driver verifier has found a violation and you can't get back into windows normally, try to boot into safe mode and reset in safe mode driver verifier, or in the troubleshooting options open command prompt and type verifier /reset.

    Note   Note
    Your system will act very sluggishly while driver verifier is enabled, this is normal as your drivers will be being subjected to heavy testing in order to make them crash.
      My ComputersSystem Spec


  5. Posts : 23
    Microsoft Windows 10 Pro 64 bitar 10586 Multiprocessor Free
    Thread Starter
       30 Dec 2015 #15

    I run driver verifier, after a while and i got som new bluescreens. I also deleted the panda files.
      My ComputerSystem Spec

  6. axe0's Avatar
    Posts : 13,721
    Windows 10 Pro
       31 Dec 2015 #16

    What is the graphics frequency in the BIOS?




    BSOD on my new computer Diagnostic test BSOD on my new computer
     GPU TEST

    Run Furmark to test your GPU. Furmark tutorial

    Note   Note
    Run Furmark for around 30 minutes


    warning   Warning
    Your GPU temperatures will rise quickly while Furmark is running. Keep a keen eye on them and abort the test if temperatures rise too high

    Use HWMONITOR | Softwares | CPUID to monitor the temperatures, abort the test if the temps reach 85C

    Please add to your specs the cooling system and PSU
      My ComputersSystem Spec


  7. Posts : 23
    Microsoft Windows 10 Pro 64 bitar 10586 Multiprocessor Free
    Thread Starter
       31 Dec 2015 #17

    Where can i see the graphics frequency in the BIOS?
    I have run the Furmark test for about 30minutes, It passed and the graphic card temp was about 70 degrees.
      My ComputerSystem Spec

  8. axe0's Avatar
    Posts : 13,721
    Windows 10 Pro
       31 Dec 2015 #18

    I see I was wrong with overclocking GPU settings in the BIOS.
    You can use Afterburner - MSI Gaming SeriesMSI Gaming Series for it, MSI Afterburner is a lot used for overclocking but the software sometimes causes problems.
      My ComputersSystem Spec


  9. Posts : 23
    Microsoft Windows 10 Pro 64 bitar 10586 Multiprocessor Free
    Thread Starter
       01 Jan 2016 #19

    I took a print screen from MSI Afterburner so you can se the frequency. I got an other bluescreen when I played a game, earlier today. Is It a hardware problem or Is I a driver issue?
    Attachment 56425
    Attachment 56426
      My ComputerSystem Spec

  10. axe0's Avatar
    Posts : 13,721
    Windows 10 Pro
       01 Jan 2016 #20

    Difficult to say without dump

    What memory model and make are you using?
    What is the frequency and voltage of the memory? This you can find in the BIOS.
      My ComputersSystem Spec


 
Page 2 of 4 FirstFirst 1234 LastLast

Related Threads
New Computer, New BSOD's in BSOD Crashes and Debugging
Just recently bought and built a computer and just started getting random BSOD's, normally not while playing games. I've tried to keep a close eye on my temps, and none have gotten above 85o C, but I'm still new to desktop computing and I am afraid...
Hey guys, Ive been getting bsods recently while doing seemingly unrelated things. The most recent one I got was when I was playing a game on steam. I have attached the .dmp file to the forum message. What do you guys see? The BSOD error...
BSOD happens only when the computer cold boots from a prolonged inactive state. If the PC is off for several hours and is turned on it occurs. Computer typically blue screens, sometimes it freezes at the bios splash screen where they Windows 10...
BSOD when away from computer in BSOD Crashes and Debugging
Hey all, I am getting random crashes caused by ntoskrnl.exe when I am away from my computer. Not everytime I am away either. Haven't found another thread with the address I'm getting, so any help would be appreciated. PS in the logs there is...
BSOD twice when wifes is using computer ! in BSOD Crashes and Debugging
AS stated its done it wife when wife's been using machine, i dont think she doing anything exciting facebook i would guess.I have troubles with firefox it just stops responding, i disabled the sound card and its not done this for a few days now.Any...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 20:51.
Find Us