Windows 10: BSOD. Attempted execute of noexecute memory Solved


  1. Posts : 4
    Microsoft Windows 10 Home 64-bit 10586 Multiprocessor Free
       20 Dec 2015 #1

    BSOD. Attempted execute of noexecute memory


    Hi,
    I built a desktop and it was BSODing non stop with the error message, "attempted execute of noexecute memory".

    I then stripped out the components till finally only these are in the system and re- installed windows.

    Asus Z170 Pro
    Core i5 6600k
    Gskill Ripjaws 16 GB, DDR4, 2400, CL15
    Samsung 850 evo.


    The memory earlier was Corsair and I swapped it for the GSkill kit, and while the BSODs have reduced, I still get them, with the same Message.

    I'm attaching the dump file.

    Help will be greatly appreciated,

    Thank you.
      My ComputerSystem Spec

  2. axe0's Avatar
    Posts : 13,706
    Windows 10 Pro
       21 Dec 2015 #2

    Hi natbatter,

    Have you tried some tests for the hardware?
      My ComputersSystem Spec


  3. Posts : 4
    Microsoft Windows 10 Home 64-bit 10586 Multiprocessor Free
    Thread Starter
       21 Dec 2015 #3

    I've replaced the RAM. Also ran prime 95. At the moment there's nothing else to test. All other components are removed temporarily.

    I'm of the impression that it's a bad BIOS or some motherboard driver is bad.

    Really do not think it's a bad CPU or SSD.

    If there is any specific test I should run, please let me know.

    Cheers.
      My ComputerSystem Spec

  4. axe0's Avatar
    Posts : 13,706
    Windows 10 Pro
       21 Dec 2015 #4

    It's a bit difficult, the usual cause for this error, 0xFC(ATTEMPTED_EXECUTE_OF_NOEXECUTE_MEMORY), is drivers.

    Please try running the IntelBurnTest: Download IntelBurnTest - MajorGeeks

    Please fill in your system specs
    Please follow this tutorial and download the tool. The tool will give you detailed information about your system specs, please fill in your system specs more completely including PSU, cooling system and other stuff you have for your system. The PSU, cooling system and other stuff aren't mentioned in the tool.
    How to fill in your system specs:

      My ComputersSystem Spec


  5. Posts : 4
    Microsoft Windows 10 Home 64-bit 10586 Multiprocessor Free
    Thread Starter
       21 Dec 2015 #5

    Thanks for the prompt follow up,

    I've updated the system specs as asked and included a snap of the IBT.

    Ran prime yesterday, Small FFTS and it was ok,

    Issues aren't indicating stability issues under load, rather just arbitrary crashes. Sometimes on start up, and some times out of no where.

    If i can get clued in to what the issue is, great. Otherwise I'm of a mind to change the motherboard.

    Like mentioned earlier, it's extremely stripped down as of now, so not many drivers to conflict.

    Cheers.
      My ComputerSystem Spec


  6. Posts : 4
    Microsoft Windows 10 Home 64-bit 10586 Multiprocessor Free
    Thread Starter
       23 Dec 2015 #6

    Issue solved.

    Was a bad CPU.

    Replaced it, and all's good.
      My ComputerSystem Spec


 

Related Threads
Random BSOD Memory Management issue... in BSOD Crashes and Debugging
Hi I was wondering if someone can help me before I lose my sanity. I built a new system in September and things were going OK until the recent 1511 update to Windows 10. Since then I've been getting a lot of BSOD errors pointing to...
Hi everyone, I am getting the following BSOD errors: The Crash Files will be posted - bellow --These 2 are most frequent (90% of the time)-- MEMORY MANAGEMENT (13 Times) IRQL_NOT_LESS_OR_EQUAL (8 Times) --These 4 are less frequent (10% of...
Solved BSoD Memory Management at Desktop + Ingame in BSOD Crashes and Debugging
Hey guys, I built a new PC and now I have some troubles getting it to work. I get so many bluescreens, most of them appear when I am on the desktop a few minutes after the PC starts (sometimes I can start playing games, but after a few minutes...
Hi, I had a program in visual basic script which I used under Win 8.1 (from which upgraded) to set a daily restore point. I've discovered that nothing happens when I double click it. I understand vbscript is implemented in Win 10 and the dll...
Can't execute setups anymore in General Support
Hello everyone, a few days ago I upgraded my Windows 7 to Windows 10. Since then I get the following Errors everytime I try to execute a setup: ShellExecuteEx failed; Code 3221225477 Executing it with administrator-rights leads to a different...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 09:28.
Find Us