Page 2 of 3 FirstFirst 123 LastLast

  1. Joined : Dec 2015
    Posts : 12
    Windows 10 64bit
       20 Dec 2015 #11

    Running the 2nd scan after rebooting now.

    As for games - Mostly CSGO. My CPU runs at fine temps and load. I've monitored it plenty. I've never actually had a BSOD while playing a game, thinking back. Most of them just come at various times during use whether it's watching twitch, reading a blog, or writing a paper. My card has 2gb, and most games at this point let you know if you don't have enough vram to run higher settings, and I don't typically try to overdo it. I play low settings most of time as I prefer fps over looks. I don't think any of that's causing the issue I'm having but I suppose I can't rule anything out just yet.
      My System SpecsSystem Spec


  2. Joined : Dec 2015
    Posts : 100
    Windows 10
       20 Dec 2015 #12

    Welll, obviously, but the thread starter specificly said after playing the game. I know it can be something else like a Corrupt PCIe Device.
      My System SpecsSystem Spec


  3. Joined : Dec 2015
    Posts : 100
    Windows 10
       20 Dec 2015 #13

    How much frames achieved in Counter Strike?
      My System SpecsSystem Spec


  4. Joined : Dec 2015
    Posts : 12
    Windows 10 64bit
       20 Dec 2015 #14

    MSMPlayz said: View Post
    How much frames achieved in Counter Strike?
    300. I set my fps limit to 300, and it pretty much doesn't dip below.

    I should clarify I meant to say that the timing of the bsod was random. I didn't mean that the bsod come consistently after hours of gaming. Actually, I did not crash at all today and I played about 3 hours. Yet at least. Today was a good day.
      My System SpecsSystem Spec


  5. Joined : Jun 2015
    Posts : 10,906
    Windows 10 Pro / Windows 10 TP / Windows 8.1 Pro / Windows 7 Pro
       20 Dec 2015 #15

    MSMPlayz said: View Post
    Welll, obviously, but the thread starter specificly said after playing the game. I know it can be something else like a Corrupt PCIe Device.
    I suggest to focus on the total description of the OP, not only the first post.
    Every description need to be used for a patern.
      My System SpecsSystem Spec


  6. Joined : Dec 2015
    Posts : 12
    Windows 10 64bit
       20 Dec 2015 #16

    axe0 said: View Post
    What memtest did you ran?

    If you are using a program like Ccleaner please stop using it while troubleshooting.
    This because programs like Ccleaner remove dump files that are needed to troubleshoot.
    Or configure Ccleaner to not remove dump files:





    Recent BSOD Issues Diagnostics Test Recent BSOD Issues
     System File Check

    Please try following:
    • Open an admin command prompt
    • Copy/paste "sfc/scannow" (without quotes) and press enter
    • When it finished reboot your system
    • Open again an admin command prompt
    • Enter sfc/scannow again

    If sfc/scannow does NOT say "Windows Resource Protection did not find any integrity violation" after the second SFC, please upload the cbs.log file located at {windows partition}\Windows\Logs\CBS\, if the file is too large try a 3rd party uploader like dropbox, onedrive, google drive, mediafire etc.
    System File Check(SFC a.k.a. Windows Resource Protection) needs to have your system rebooted in order for sfc to try to fix the problems that it finds.
    Finished the 2nd scan. It DID say that the scan didn't not find any integrity violations. The first scan however did find issues, but I suppose it managed to fix them. Would you like me to upload the file still?
      My System SpecsSystem Spec


  7. Joined : Jun 2015
    Posts : 10,906
    Windows 10 Pro / Windows 10 TP / Windows 8.1 Pro / Windows 7 Pro
       20 Dec 2015 #17

    A file isn't necessary with a no integrity violations result

    Please test your system, if any bluescreen occurs let me know with
    • an uploaded zip from the dm log collector
    • a description of what happened and what you were doing
      My System SpecsSystem Spec


  8. Joined : Dec 2015
    Posts : 12
    Windows 10 64bit
       20 Dec 2015 #18

    axe0 said: View Post
    A file isn't necessary with a no integrity violations result

    Please test your system, if any bluescreen occurs let me know with
    • an uploaded zip from the dm log collector
    • a description of what happened and what you were doing
    Sure. I know for a fact that the driver verifier throws the bsod at me. I think I will run it again to test. I'm not entirely sure what a dm log collection is but I'll handle that if it's necessary. Going to run the verifier.
      My System SpecsSystem Spec


  9. Joined : Jun 2015
    Posts : 10,906
    Windows 10 Pro / Windows 10 TP / Windows 8.1 Pro / Windows 7 Pro
       20 Dec 2015 #19

    The dm log collector is the tool from the BSOD Posting Instructions
      My System SpecsSystem Spec


  10. Joined : Dec 2015
    Posts : 12
    Windows 10 64bit
       20 Dec 2015 #20

    axe0 said: View Post
    The dm log collector is the tool from the BSOD Posting Instructions
    Ah. I probably should have recognized that.

    So, I ran the verifier again. Seems the same problem persists, especially with the clipsp.sys file(?).

    I'll try to provide some detail:

    I run the verifier through the CMD prompt by typing: "verifier".

    I pick settings, and test all drivers.

    I restart, it begins the verifying. After a few minutes, it BSODs. It reboots, and then continues the process(I assume). It BSODs again after a few minutes(both times it gives a driver verifier detected violation citing the clipsp.sys.). It reboots again after that, and goes into an automatic repair system restore.

    System Restore completes. Verifier is no longer running, I'm back at my desktop.

    Now I'm here. I'll attach the new DM Log.

    It's 6:20 in the morning, so I'm probably going to be in bed before you reply. I'll check back tomorrow and hopefully we can get this sorted out. I appreciate your help.
      My System SpecsSystem Spec


 
Page 2 of 3 FirstFirst 123 LastLast


Similar Threads
Thread Forum
Recent upgrade on motherboard and CPU, BSOD when under GPU load
Hi, I recently upgraded my motherboard and CPU to a Gigabyte Z97 Gaming 5 motherboard and an Intel Xeon 1231 v3. I use a Nvidia GTX 660 GPU, and recently my FPS in-game has been stuttering. When I checked my GPU load, I noticed it kept on dipping...
BSOD Crashes and Debugging
BSOD... issues
Thanks for taking a look at my post! I've been having BSODs for a while now, and I've officially decided I need professional help. With the BSODs, that is. Typically, they're happening while I'm running games (It's pretty much kicked my brother...
BSOD Crashes and Debugging
Help cant bridge connection after recent windows 10 recent update
it saids is ethernet unidentified network? no internet access sharing option is off. i try restarting the pc:( it use to work fine until the update bridging network cable
Network and Sharing
Solved BSOD issues
Hi all, some of you might recognize me from the SevenForums. I was having these same issues with Windows 7 installed, and it was diagnosed to be a insufficient power supply. To remedy this (and simultaneously upgrade to a GPU to support 3...
BSOD Crashes and Debugging
No BSOD issues but event viewer issue?
I saw that unless you have a BSOD you should not post in that specific forum but this is an Event Viewer issue so i don't know where to post this . I have no BSOD's but an event viewer instance with an error code 10016 I read a lot of...
General Support
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 13:33.
Find Us
Twitter Facebook Google+



Windows 10 Forums