Hi Ludwig,
Welcome to the 10forums.
I'll try my very best to guide you through the troubleshooting process for a chance to solve all the bluescreens, but it'll be a long way.
Please read my post properly, some things you may overlook quickly.
Please tell me, what have you already done so far?
Please uninstall Avast while troubleshooting and use Windows Defender as alternative.
Avast - Uninstall Completely - Windows 7 Help Forums
Avast drivers have been flagged a lot in various of bluescreens, it is highly recommended to uninstall Avast properly while troubleshooting.
Code:
*** WARNING: Unable to verify timestamp for aswMonFlt.sys
*** ERROR: Module load completed but symbols could not be loaded for aswMonFlt.sys
Please disconnect every USB device, exception for mouse and keyboard, while troubleshooting
Code:
ffffd000`2571b8b8 fffff801`21f017d5 usbccgp!DispatchPdoUrb+0x2a5
ffffd000`20377448 fffff801`5f6534d7 USBXHCI!Control_WdfEvtIoDefault+0x1f7
ffffd000`20377418 fffff801`5f65153c USBXHCI!Control_MapTransfer+0x94
Please check Intel for driver updates for the network driver or reinstall the drivers.
Driver Reference Table - e1i63x64.sys
Code:
*** WARNING: Unable to verify timestamp for e1i63x64.sys
*** ERROR: Module load completed but symbols could not be loaded for e1i63x64.sys
0: kd> lmvm e1i63x64
start end module name
fffff801`2f000000 fffff801`2f079000 e1i63x64 T (no symbols)
Loaded symbol image file: e1i63x64.sys
Image path: \SystemRoot\System32\drivers\e1i63x64.sys
Image name: e1i63x64.sys
Timestamp: Thu Mar 26 21:24:57 2015 (55146B19)
CheckSum: 0007CBC7
ImageSize: 00079000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Please uninstall everything of Nvidia using Display Driver Uninstaller and install new drivers from Nvidia. Be sure the clean install box is checked and only install the Graphics driver and the PhysX driver.
Attachment 54348
Code:
fffff803`65ebf8d0 fffff801`e907165cUnable to load image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
nvlddmkm+0x7165c
0: kd> lmvm nvlddmkm
start end module name
fffff801`e9000000 fffff801`e9ae8000 nvlddmkm T (no symbols)
Loaded symbol image file: nvlddmkm.sys
Image path: \SystemRoot\system32\DRIVERS\nvlddmkm.sys
Image name: nvlddmkm.sys
Timestamp: Thu Jul 23 02:15:19 2015 (55B03217)
CheckSum: 00AA405B
ImageSize: 00AE8000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Are you using RAID for your hard drive setup?
If you are, please check Intel for updates for the Intel Rapid Storage Technology drivers
Driver Reference Table - iaStorA.sys
Code:
ffffd000`2cc6df38 fffff801`8ec11599Unable to load image \SystemRoot\System32\drivers\iaStorA.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for iaStorA.sys
*** ERROR: Module load completed but symbols could not be loaded for iaStorA.sys
iaStorA+0x71599
3: kd> lmvm iastora
start end module name
fffff801`8eba0000 fffff801`8ee6d000 iaStorA T (no symbols)
Loaded symbol image file: iaStorA.sys
Image path: \SystemRoot\System32\drivers\iaStorA.sys
Image name: iaStorA.sys
Timestamp: Mon Jan 14 19:00:27 2013 (50F447BB)
CheckSum: 000A2FE2
ImageSize: 002CD000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Please test your memory using MemTest86+
Code:
Probably caused by : memory_corruption
Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 10 Forums
Note
MemTest86+ needs to be run for
at least 8 passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for
zero errors here. Even a single error will indicate RAM failure.
Diagnostics Test
System File Check
Please try following:
- Open an admin command prompt
- Copy/paste "sfc/scannow" (without quotes) and press enter
- When it finished reboot your system
- Open again an admin command prompt
- Enter sfc/scannow again
If sfc/scannow does NOT say "Windows Resource Protection did not find any integrity violation" after the second SFC, please upload the cbs.log file located at {windows partition}\Windows\Logs\CBS\, if the file is too large try a 3rd party uploader like dropbox, onedrive, google drive, mediafire etc.
System File Check(SFC a.k.a. Windows Resource Protection) needs to have your system rebooted in order for sfc to try to fix the problems that it finds.
Please fill in your system specsPlease follow
this tutorial and download the tool. The tool will give you detailed information about your system specs, please fill in your system specs more completely.
How to fill in your system specs: