BSODs after upgrading to Windows 10

  1.    12 Dec 2015 #1

    BSODs after upgrading to Windows 10

    I get a lot of pagefile errors. Sometimes these will occur when the computer sits idle for a while, sometimes it happens when I'm downloading quite a bit of data (updated Star Citizen [~35 gigs] and it blue screened twice).

    I've been working for weeks to try to diagnose this issue, but everything I've tried seems to have no effect.

    I've moved the pagefile from my SSD to my HDD. I've tried different network drivers (there are technically no official Win 10 drivers for my NIC). The first seemed to have slowed down the crashes; at one point my computer was crashing every 30 minutes or so, now it's maybe once a day.

    Other issue I've seen: after a crash, if I allow the system to do a warm reboot, my SSD will not be detected. I have to completely power off the computer and turn it back on to get it to boot properly. I have 5 dump collections.
      My ComputerSystem Spec

  2. axe0's Avatar
    Posts : 13,824
    Windows 10 Pro
       13 Dec 2015 #2

    Hi lighti3ulb,

    Welcome to the 10forums.

    I have looked at the dumps present in the zip, 2 of them have gotten my attention.
    The 0x12B and 0x7A are the onces I find interesting, the 0x12B is a crash usually caused by the memory and the 0x7A as you say is a process having problems with getting access to an object.
    The 0x7A is caused by a Microsoft driver, but the details from the dump say something else.
    Driver Reference Table - Msfs.SYS
    Please read me suggestions below carefully
    *** WARNING: Unable to verify timestamp for Msfs.SYS
    *** ERROR: Module load completed but symbols could not be loaded for Msfs.SYS
    2: kd> lmvm Msfs
    start             end                 module name
    fffff801`7e120000 fffff801`7e12f000   Msfs     T (no symbols)           
        Loaded symbol image file: Msfs.SYS
        Image path: Msfs.SYS
        Image name: Msfs.SYS
        Timestamp:        unavailable (00000000)
        CheckSum:         00000000
        ImageSize:        0000F000
        Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4

    BSODs after upgrading to Windows 10 Diagnostics Test BSODs after upgrading to Windows 10
     Malware scan

    Please run a threat scan with Malwarebytes*, a full scan with your AV, scan your system with Adwcleaner, Kaspersky TTDSKiller, ESET Online Scanner and SuperAntiSpyware
    Note   Note
    *(Uncheck trial version in the installation process)

    BSODs after upgrading to Windows 10 Diagnostics Test BSODs after upgrading to Windows 10
     System File Check

    Please try following:
    • Open an admin command prompt
    • Copy/paste "sfc/scannow" (without quotes) and press enter
    • When it finished reboot your system
    • Open again an admin command prompt
    • Enter sfc/scannow again

    If sfc/scannow does NOT say "Windows Resource Protection did not find any integrity violation" after the second SFC, please upload the cbs.log file located at {windows partition}\Windows\Logs\CBS\, if the file is too large try a 3rd party uploader like dropbox, onedrive, google drive, mediafire etc.
    System File Check(SFC a.k.a. Windows Resource Protection) needs to have your system rebooted in order for sfc to try to fix the problems that it finds.

    BSODs after upgrading to Windows 10 Diagnostic Test BSODs after upgrading to Windows 10

    Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 10 Forums

    Note   Note

    MemTest86+ needs to be run for at least 8 passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.
      My ComputersSystem Spec

  3.    14 Dec 2015 #3

    Hello axe0,
    Thank you for looking into this.

    I ran all suggested AV, Malware, and rootkit spammers with no positive finds (outside of cookies)

    sfc scan did not find any Integrity Violations

    I ran 10 passes with Memtest+, and hit no errors.
      My ComputerSystem Spec

  4. axe0's Avatar
    Posts : 13,824
    Windows 10 Pro
       15 Dec 2015 #4

    Have you gotten any bluescreen or pagefile errors meanwhile?
      My ComputersSystem Spec

  5.    15 Dec 2015 #5
      My ComputerSystem Spec

  6. axe0's Avatar
    Posts : 13,824
    Windows 10 Pro
       16 Dec 2015 #6

    Please upload directly or remove permission requirement to make it more easy to help.
      My ComputersSystem Spec

  7.    16 Dec 2015 #7

    Sorry about that. You should be able to download it now.
      My ComputerSystem Spec

  8. axe0's Avatar
    Posts : 13,824
    Windows 10 Pro
       16 Dec 2015 #8

    If you are overclocking anything, revert back to stock while troubleshooting.
    On an unstable system, overclocking may make things worse.
    CPUID:        "Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz"
    MaxSpeed:     3400
    CurrentSpeed: 3403
    The requested page of kernel data could not be read in.  Typically caused by
    a bad block in the paging file or disk controller error. Also see
    If the error status is 0xC000000E, 0xC000009C, 0xC000009D or 0xC0000185,
    it means the disk subsystem has experienced a failure.
    If the error status is 0xC000009A, then it means the request failed because
    a filesystem failed to make forward progress.
    Arg1: ffffc0018d647ce0, lock type that was held (value 1,2,3, or PTE address)
    Arg2: ffffffffc000000e, error status (normally i/o status code)
    Arg3: 000000012e19c860, current process (virtual address for lock type 3, or PTE)
    Arg4: fffff961b412aa44, virtual address that could not be in-paged (or PTE contents if arg1 is a PTE address)

    BSODs after upgrading to Windows 10 Diagnostics Test BSODs after upgrading to Windows 10

    Run SeaTools to check the integrity of your HDD. SeaTools for DOS and Windows - How to Use - Windows 7 Help Forums

    Note   Note
    Do not run SeaTools on an SSD as the results will be invalid.

    Run chkdsk
    Disk Check - Windows 7 Help Forums

    Run HDTune to
    • scan for errors, no quick scan but full scan
    • check the health,
    • benchmark.

    It may take some time, but please take the time you need to perform it properly.
    Let me know what the results are
    • of the error scan,
    • make a screenshot of the health of every hard drive and post the screenshots,
    • post screenshots with the benchmark of the
      • transfer rate,
      • access time,
      • burst rate,
      • cpu usage.
      My ComputersSystem Spec

  9.    21 Jan 2016 #9

    I ended up replacing all of the components in my computer with the exceptions of my HDD and SSD. After putting it all together, I attempted to format and reinstall Windows on the SSD, and I was unable to. I tried Win 7, 10 and Kubuntu. It was while I was running the Kubuntu liveUSB that I realized the SSD was bad; after some time, the SSD would lose communication, and I was not even able to navigate the folder structure. I've sent the SSD in for replacement.

    Thank you for your assistance! I greatly appreciate it.
      My ComputerSystem Spec

  10. axe0's Avatar
    Posts : 13,824
    Windows 10 Pro
       21 Jan 2016 #10

    Looks like we were on the right direction :)

    Hope your system will be stable after replacement.
      My ComputersSystem Spec


Related Threads
Windows 10 Hanging and BSODs in BSOD Crashes and Debugging
My newly built computer is borderline unusable due to constant hangs- the computer will frequently pause then continue after about 45 seconds, which makes doing any work basically impossible. During the course of writing these few sentences running...
Hi all, I had upgraded win 8.1 pro to win 10 pro and now I have a lot of problems with my notebook. At first, BSODs occurred every 5-10 minutes. I had the same problem 7-8 months ago when I installed win 8.1 on my notebook. Someone from...
Solved Multiple BSODs in Windows 10 in BSOD Crashes and Debugging
Hi All, I just registered in hope you can help me with my problem. Yesterday I upgraded from Windows 7 to Windows 10. In windows 7 I used to get BSODs about once a week. The really weird thing is that it was related to whenever I rebooted my...
Have installed Windows 10 Pro today, after rebooting I encountered a BSOD, the PC then rebooted itself and another BSOD occurred. This happened two more times and then I booted in safe mode. I have attached the mini dump files, I have not...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 17:18.
Find Us